Effects of Mudstone Particle Content on Shear Strength of a Crushed Sandstone–Mudstone Particle Mixture

The present study focuses on the shear strength, deformation, and particle crushing of sand which is mixed by crushed sandstone and mudstone particles. Two triaxial tests—one for unsaturated specimens and the other for saturated specimens—were performed, along with sieve analysis tests. Results obtained from the triaxial tests indicate that, with the increment of the mudstone particle content by weight, the angle of internal friction decreases, the cohesion increases and then decreases, and both the initial angle of shearing resistance at the atmospheric pressure and decremental angle increase and then decrease. Compared to the unsaturated specimens, the deviator stress or normalized deviator stress of the saturated specimens at the same axial stress may decrease due to the wetting action. Thus, the shear strength of the tested materials may be reduced by the wetting action. Results of sieve analysis tests indicate that the mixing of some mudstone particles into the sandstone particle mixture may reduce the amount of particle crushing, but the wetting action may increase the amount. The amount of the crushed particle may arrive at a minimum of 40% of mudstone particle content by weight.     

京西北地区地应变观测与小震震源机制解一致性研究

以京西北地区作为研究区域,采用应变参数方法解算定点地应变观测数据,将所得应变参数时间序列作为研究对象,利用该结果与研究区内同期小震震源机制解进行一致性分析,研究得出呈拉张性质的定点观测最大主应变方位与震源机制解最大拉张变形方向（T轴）水平投影具有良好的对应性,整体以NNW—NE向为主,且自西向东排布的测点最大主应变方位与震源机制解最大拉张变形方向均表现为逐渐东向偏移的趋势,与华北平原块体北部发生顺时针旋转活动的特征相吻合,结果进一步检验了地应变观测反映区域应变场信息的能力。     

建平地区太古宙变质杂岩构造变形及演化特征

建平地区太古宙变质岩石发育,地质构造复杂。近年研究表明:区内太古宙变质杂岩是由多期变质、变形的中酸性深成侵入岩和少量上壳岩组成,可划分出变质上壳岩组合、叶柏寿片麻岩、斜长片麻岩和二长片麻岩4个岩石单位。本文主要对区内太古宙变质杂岩的构造变形及构造演化进行讨论,初步确定了早期韧性变形阶段(鞍山期划分4个变形幕)和晚期脆性变形阶段(印支—燕山期)。构造层次由早期深部层次向晚期浅层演化;其变形由流动机制—压扁机制—弯曲机制—韧性剪切机制到剪切破裂机制的演化。     

圈闭地形内斜坡破坏的多期性和规律性

本文以黄河上游某拟建水电站坝址场地为例,论证了圈闭地形内斜坡破坏的多期性和规律性问题。在充分的野外调查和室内研究资料的基础上,将区内的斜坡破坏分为两期,即第一期为已经失稳的老滑坡群;第二期为发育在第一期滑坡群圈闭状破裂壁之后的正处于蠕动和破坏阶段的变形坡体,进而将第一期的滑坡分为两个强度次序。同时,还揭示了圈闭地形内斜坡破坏的规律性,即随着期和序次的增高,斜坡破坏面积增大,滑坡个数增多,规模减小,强度降低,滑距变短,滑体破碎程度变弱。最后指出,上述多期性和规律性应具有普遍性意义。     

黄山韧性剪切带构造形迹及变形期次

黄山韧性剪切带位于东天山秋格明塔什-黄山韧性剪切带东部,是东天山地区最重要地质构造之一.分析其在黄山东一带表现出的构造形迹,并对该区构造变形期次作初步探讨.黄山韧性剪切带在黄山东一带构造形迹总体显示右旋剪切特征,后期存在左旋剪切,变形期次共4期,剪切应变值为2.4～0.73,有限应变分析认为,变形机制以压扁变形为主.     

软土深基坑变形特征的数值模拟分析研究

选用Drucker-Prager弹塑性本构关系,建立了模拟深基坑开挖和支护全过程的平面有限元数值模型。运用该模型并结合工程实际,分析了深基坑开挖过程中边坡土体的应力场和塑性区的分布规律以及沉降、位移和坑底隆起3种基坑变形的机理,找出了影响深基坑变形的主要因素:支护结构的刚度、支护结构入土深度、基坑开挖深度和宽度以及地层强度参数等。     

玉树地震地表变形InSAR观测及初步分析

采用玉树M_S7.1级地震前后两期PALSAR雷达数据(震前2010年1月15日, 震后4月17日)进行了“两轨+DEM”的InSAR处理, 获得了高质量的差分干涉雷达条纹图像和同震变形场。参考该区的基本构造格局, 根据干涉图像的变形范围、变形量和变形梯度可以初步判断:(1)玉树地震诱发了总体上NWW走向, 全长约70km地表陡变带, 陡变带南段位错及陡变梯度较大, 会在地表产生地表破裂;而西北部4段位错及陡变梯度较小, 不易在地表诱发破裂, 但可能在地下一定层位产生了隐伏破裂带;(2)陡变带两侧的雷达视线向运动方向预示发震断裂以左旋走滑运动为主;(3)宏观震中位于玉树县城西北约16km的地表陡变带上。D-InSAR解译结果与中国地震台网中心震源机制解、野外发震断裂调查结果及地貌特征吻合较好, 证明了干涉雷达解译成果的可靠性, 可以为准确定位玉树地震发震断裂地表行迹和快速评定震害损失提供有力的技术支持。      

降雨对张家口地震台伸缩仪干扰特征的研究

张家口伸缩仅受降雨干扰，不但与降雨量有关，而且与季节和降雨的方式等也有密切的关系。夏、秋季节持续或突降大雨后，两天左右引起应变量明显的变化，可用2．5倍毫米应变均方差，识别干扰和异常，有较大的使用价值。     

华北克拉通东部地块中生代变形的关键时限及其对构造的制约——以胶辽地区为例

胶辽地块是华北克拉通东部地块的重要组成,处于北倾的大别-苏鲁构造带的上盘。过去近十年来提出的几个关于东北亚构造演化的重要构造模型涉及到了胶辽地块。本文主要利用我们在辽东半岛南部地区获得的SHRIMP U-Pb锆石定年结果,结合华北克拉通东部野外地质调查的野外第一手资料、我们获得的渤海湾盆地中的中生代构造资料以及其它研究人员的SHRIMP定年资料,系统建立华北克拉通东部地块中生代的构造变形过程,并讨论相关构造模型或构造问题。最近SHRIMP定年研究发现,胶辽地块中古元古代地质体经历了～160 Ma的重熔事件。CL和BSE图象显示,在辽南新太古宙地块附近丹东花岗岩体的两个样品LJ023和LJ030中发现一些167～157Ma的自形岩浆锆石和围绕年龄大约为2100 Ma核部锆石的岩浆型锆石环带。这次重熔事件很可能为华北克拉通的下地壳原地重熔。丹东岩体呈NE走向排列,经历了强烈的近水平韧性剪切变形和随后NNE走向的褶皱变形。本文以丹东地区为例,准确确定了这些变形的年龄。根据辽东半岛东西向剪切带中白云母K-Ar和~(40)Ar/~(39)Ar年龄,第一幕变形界定在195～193 Ma之间。根据野外侵入体与变形叶理之间的关系,丹东花岗岩遭受的第二幕变形发生于153～145Ma之间。第三幕变形,也即为NNE向走滑作用,约束在135Ma～95Ma     

Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.