Sedimentary environment and development controls of the hydrocarbon source beds:Middle and Upper Proterozoic in northern North China

Problem on development control of marine source bed hold in Chinese petroleum industry progression. The Hongshuizhuang Formation,Tieling Formation and Xiamaling Formation in the Middle and Upper Proterozoic are important hydrocarbon source beds in northern North China, and investigation of their sedimentary environments and the controls has great significance for petroleum exploration in North China. Based on sedimentology (sequence stratigraphy), palaeoecology, sedimentary geochemistry, and sedimentary palaeogeography, their development pattern is discussed. All these studies indicate that the development controls of the hydrocarbon source beds include a favorite palaeogeographic location, exceeding propagation of biomes in low and middle latitudes, anoxic environments, enrichment of phosphorus element and the adsorption of clay minerals during the preservation of organic matter in the marine carbonates.     

Physicochemistry and Mineralogy of Storm Dust and Dust Sediment in Northern China

Dust sediments collected from 1995 to 1998 in Beijing, Dunhuang, Inner Mongolia, Kashi, the Kunlun Mountains, Lanzhou, Ningxia, the Taklimakan Desert, and Xi‘an, China, were characterized in terms of their physical, chemical, and mineralogical properties. Most aerosols and dust analysed ranged in texture from silty clay to clay loam. Their median particle diameters (Mds) generally ranged between 5 to 63μm,coinciding with those of loess from central China and the finest sand from northwestern China. The dust sediments were characterized by a predominance of SiO2 and Al2O3, followed by K2O. Their SiO2/Al2O3and K2O/SiO2 molar ratios ranged from 5.17 to 8.43 and from 0.009 to 0.0368, respectively. The mass concentration spectrum during a dust storm showed a single peak, rather than the triple peak generally observed under clear sky conditions. The dominant minerals were chlorite, illite, calcite, and dolomite.These physical, chemical, and mineralogical properties were consistent with those of aeolian soils and loess in western and central China. The results suggest that aerosols and fine-gained fractions of dust sediments collected in northern China are mainly composed of soil material transported from the arid and semiarid regions of China and Mongolia by prevailing winds. The rate of deposition and properties of dust falling on eastern China were strongly influenced by meteorological conditions, season, latitude, longitude, and altitude of the sampling sites.     

柴达木盆地北缘"沙柳河岩群"的重新启用

柴北缘变质基底岩系中的表壳岩包含了岩石组合、沉积建造、变质程度和地质时代不同的两套岩石组合。其中，分布在柴达木地块的沙柳河、鱼卡河等地的以大理岩、石英岩和含石榴石英片岩为主含榴辉岩透镜体的表壳岩系，时代限定在1．0～1．3Ga，与分布在欧龙布鲁克微陆块的全吉山、德令哈等地形成时代大约2.3～2.4Ga的达肯大坂岩群有着明显的不同，后者以斜长角闪岩、石榴石英片岩和黑云变粒岩为主，并具有较强的钾质混合岩化。由于前者岩石组合清楚，沉积建造特征明显，构造意义独特，且有一定的区域分布性和可比性，所以具备建立新的岩群的条件。根据定名优先的原则，决定重新启用沙柳河岩群。     

红砂岩高陡岩质边坡稳定性分析及治理

充分利用边坡失稳前自身抗滑能力进行高陡边坡治理，结合工程实例，提出了主动性公路边坡治理的思路。分别利用极限平衡法和有限元数值法，综合考虑了两种方法的优缺点，对红砂岩高陡边坡进行了全面的稳定性分析，并针对性地提出了经济合理的治理方案。     

陕北砂黄土区公路地质灾害及防治对策

中国西北黄土的颗粒组成具有明显的地带性分布规律，自NW向SE可依次划分为砂黄土带、典型黄土带和粘黄土带。黄土高原北部地质灾害综合调查表明，砂黄土区公路地质灾害的主要类型包括黄土边坡滑塌灾害、路堤裂陷灾害、路桥变形和冲蚀灾害等。根据试验测试分析结果，公路地质灾害的形成主要受黄土本身的物质组成、结构及力学性质控制，人类工程活动的盲目性是诱发地质灾害的重要因素。文章在砂黄土公路地质灾害特征分析的基础上，提出加强边坡防护和冲蚀灾害防治是公路地质灾害防治的两个基本途径，并给出了针对性的防治对策。这不仅对该地区的公路建设具有重要的指导作用，而且对其它生命线工程如铁路、输油气管道、渠道等也具有重要的借鉴意义。     

Hydrothermal Mineralization on the Mesoproterozoic Passive Continental Margins of China： A Case Study of the Langshan-Zha＇ertaishan Belt, Inner Mongolia, China

Most ore-forming characteristics of the Langshan-Zha‘ertaishan hydrothermal exhalation belt, which consists of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan large-superlarge Zn-Pb-Cu-Fe sulfide deposits, are most similar to those of Mesoproterozoic SEDEX-type provinces of the world. The characteristics include: (1) All deposits of this type in the belt occur in third-order fault-basins in the Langshan-Zha‘ertaishan aulacogen along the northern margin of the North China Platform; (2) these deposits with all their orebodies hosted in the Mesoproterozoic impure dolomite-marble and carbonaceous phyllite (or schists) have an apparent stratabound nature; ores display laminated and banded structures, showing clear depositional features; (3) there is some evidence of syn-sedimentary faulting, which to a certain extent accounts for the temporal and spatial distribution and the size of the orebodies in all deposits and the formation of intrabed conglomerates and breccias; (4) they show lateral and vertical zonation of sulfides; (5) The Cu/(Pb Zn Cu) ratio of the large and thick Pb Zn Cu orebodies gradually decreases from bottom to top; and (6) barite is interbedded with pyrites and sometimes with sphalerite. However, some characteristics such as the Co/Ni radio of the pyrites, the volcanism, for example, of the Langshan-Zha‘ertalshan metallogenic belt, are different from those of the typical SEDEX deposits of the world. The meta-basic volcanic rock in Huogeqi, the sodic bimodal volcanic rocks in the Dongshengmiao and potassic bimodal-volcanic rocks with blastoporphyfitic and blasto-glomeroporphyritic texture as well as blasto-amygdaloidal structure in the Tanyaokou deposits have been discovered in the only ore-bearing second formation of the Langshan Group in the past 10 years. The metallogeny of some deposits hosted in the Langshan Group is closely related to syn-sedimentary volcanism based on the following facts: most of the lead isotopes in sphalerite, galena, pyrite, pyrrhotite and chalcopyrite plot on both sides of the line for the mantle or between the lines for the mantle and lower crust in the lead isotope composition diagram; cobalt content of some pyrites samples is much higher than the nickel content (Co/Ni= 11.91-12.19). Some volcanic blocks and debris have been picked out from some pyritic and pyrrhotitic ores. All Zn-Pb-Cu-Fe sulfide orebodies in these deposits occur in the strata overlying metamorphic volcanic rocks in the only ore-bearing second formation. In the Jiashengpan deposit that lacks syn-sedimentary volcanic rocks in the host succession only Pb and Zn ores occur without Cu ore, but in the Dongshengmiao, Tanyaokou and Huogeqi deposits with syn-sedimentary volcanic rocks in the host succession Cu ores occur. This indicates a relatively higher ore-forming temperature. The process of synsedimentary volcanic eruption directly supplied some ore-forming elements, and resulted in secular geothermal anomaly favorable for the circulation of a submarine convective hydrothermal system, which accounts for the precipitation of deep mineralizing fluids exhaling into anoxidic basins along the syn-sedimentary fault system in the Langshan-Zha‘ertai rift. The Dongshengmiao, Tanyaokou, and Huogeqi deposits hosted in the Langshan Group appear to be a transitional type of mineral deposit between SEDEX and VMS-types but with a bias towards SEDEX, while the Jiashengpan deposit hosted in the Zha‘ertai Group is of a characteristic SEDEX type. This evidence, together with other new discoveries of Mesoproterozoic volcanic rocks and the features of lithogeny and metallogeny of the Bayun Obo deposit in the neighborhood emphasize the diversity, complexity and uniqueness of the Mesoproterozoic Langshan-Zha‘ertal-Bayun Obo ore belt.     

北京延庆北部地区后城组火山岩岩石化学特征与成因探讨

根据TAS图解 ,北京延庆北部地区后城组火山属于玄武粗安岩 流纹岩 (和粗面岩 )的双峰式组合。该套火山岩不属于典型的钾玄岩系列 ,在基性岩和中性岩中总体上以碱性系列和向碱性系列过渡的高钾钙碱性系列、钾玄岩系列为主 ,流纹岩类属于富钾质的拉斑系列。该套火山岩轻稀土元素明显富集。玄武粗安岩类岩石没有负铕异常或负铕异常不明显 ,而流纹岩存在明显的负铕异常。延庆北部地区后城组火山岩形成于燕山运动早期或中期阶段的造山变形事件趋于结束时的后碰撞构造环境中。     

新疆北天山中东段地区震源参数研究

本文首先利用经验格林函数方法证明了新疆北天山中东段地区的震源谱基本满足ω-2 模型。在此基础上 ,通过对S波观测谱中的噪音、仪器、路径、场地等影响的逐一消除 ,得到了研究区 10 5次ML2 5～ 5 7地震的震源谱 ,进而根据Brune的圆盘震源模型计算了地震矩、应力降、震源半径等震源参数。结果表明 ,这些地震的标量地震矩M0 与ML 震级线性相关较好 ,关系为Log10 M0 =1 10ML+ 17 2 0 ;震源半径在 10 0～ 15 0 0m之间 ;应力降介于 1～ 16 0bar之间 ,优势分布于 1～ 10 0bar。地震矩与拐角频率的关系呈现出两段趋势 ,可能表明了研究区震源的多重标度特征 :当M0 小于 4× 10 2 1dyne cm时 (相当于ML4 0地震 ) ,应力降显示出对M0 有依赖关系 ;当M0 大于 4× 10 2 1dyne cm时 ,地震的应力降不依赖于M0 。     

Rock albedo and monitoring of thermal conditions in respect of weathering: some expected and some unexpected results

Broadly speaking, there is, at least within geomorphic circles, a general acceptance that rocks with low albedos will warm both faster and to higher temperatures than rocks with high albedos, reflectivity influencing radiative warming. Upon this foundation are built notions of weathering in respect of the resulting thermal differences, both at the grain scale and at the scale of rock masses. Here, a series of paving bricks painted in 20 per cent reflectivity intervals from black through to white were used to monitor albedo‐influenced temperatures at a site in northern Canada in an attempt to test this premise. Temperatures were collected, for five months, for the rock surface and the base of the rock, the blocks being set within a mass of local sediment. Resulting thermal data did indeed show that the dark bricks were warmer than the white but only when their temperatures were equal to or cooler than the air temperature. As brick temperature exceeded that of the air, so the dark and light bricks moved to parity; indeed, the white bricks frequently became warmer than the dark. It is argued that this ‘negating’ of the albedo influence on heating is a result of the necessity of the bricks, both white and black, to convect heat away to the surrounding cooler air; the darker brick, being hotter, initially convects faster than the white as a product of the temperature difference between the two media. Thus, where the bricks become significantly hotter than the air, they lose energy to that air and so their respective temperatures become closer, the albedo influence being superceded by the requirement to equilibrate with the surrounding air. It is argued that this finding will have importance to our understanding of weathering in general and to our perceptions of weathering differences between different lithologies. Copyright © 2005 John Wiley & Sons, Ltd.     

Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information

Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd.