中国菊花石的矿物组成特征

中国菊花石产于二叠纪栖霞组碳酸盐岩层位中,菊花石经光学显微鉴定,Ｘ－射线衍射分析和ｘ－射线能谱仪测试,其原生矿物主要天青石和菱锶矿,两种含锶矿物后期广泛被方解石,白云石和石英交代,依据其菊花石原生矿物组成,将我国菊花石划分为天青石型（浏阳菊花石为典型）菱锶矿型（宣恩,来宾菊花石）和青青石－菱锶矿混合型（永丰型菊花石）菊花石三种类型。     

包裹碎石桩加固的砂土液化机理试验研究

通过分别开展包裹碎石桩加固、碎石桩加固以及未加固的饱和砂土液化振动台试验,对比分析不同加固类型下的抗液化性能,重点剖析包裹碎石桩加固的砂土液化机理。试验表明:振动加载过程中,包裹碎石桩始终保持桩体的完整性与良好的排水性能且其加固模型地基的总沉降量相较于未加固模型地基减少了50%,相较于碎石桩加固模型地基减少了31.8%。包裹碎石桩加固模型排出水量较未加固模型地基提高了33.3%,较碎石桩加固模型地基提高了16.6%;包裹碎石桩加固模型地基的超静孔压值下降显著且地基下层砂土出现未液化的现象;并进一步发现包裹碎石桩的排水加固作用沿土层竖向深度呈递增趋势。因此,可以发现包裹碎石桩加固砂土液化的抗震性能优于碎石桩。     

一等水准点之记标准化与规范化研究

为保证一等水准点之记精度与质量,提高测绘人员野外工作效率,对目前的一等水准点之记进行了探讨与分析,指出了其详细位置图与点位,详细说明表达、标石断面图绘制和经纬度书写及交通路线描述中存在的缺点,并基于此提出了若干改进意见,这在一定程度上促进了一等水准点之记信息的标准化与规范化。     

湖北清江画面石图案的纹理类型及其地质成因

清江画面石是近二十年来出现的一种新的观赏石石种,原石主要为中泥盆统云台观组灰白色石英砂岩.清江画面石具有观赏价值的关键因素是构成画面的各类图案.本文将画面石图案的纹理类型划分为三种类型——线型、条带型和梳型,并对每种类型进行了详细描述.在野外调查基础上,通过岩石特征、微观结构构造、地球化学特征等综合对比分析,对三种类型的清江画面石图案的地质成因进行初步讨论,认为线型（即裂隙）的形成可能与燕山期或之后区域构造活动有关,条带型（即层理）形成于泥盆纪的原生沉积构造,而梳型则可能是由于外来物质在成岩期后沿着层理面或纹层面向下渗流而成,推测形成于燕山期之前,但需进一步研究确定.三种图案中的不同颜色,是由含有铁锰质氧化物的地下水或地表径流水等沿裂隙、层理面或渗流面浸染或部分交代填隙物而成,在现代河流下切作用下,崩落入水,经过流水搬运、冲刷,最终形成了清江画面石.     

Calcified roasting-acid leaching process of vanadium from low-grade vanadium-containing stone coal

The low-grade vanadium-containing stone coal used in this experiment was collected from Wuxi Coun- try, Chongqing City, China. The experiment focused on the vanadium recovery from roasted residue through opti- mizing the process conditions of an effective and environmentally-friendly technology, named calcified roast- ing-sulfuric acid leaching technology. By single-factor experiments and orthogonal experiments, the effects of roast- ing temperature, roasting time, sulfuric acid concentration and leaching time on the leaching ratio of vanadium were analyzed. The results showed that the leaching ratio of vanadium reached 85.5% under the proper technological con- ditions of roasting temperature=950℃, roasting time=4 h, 40% concentration of sulfuric acid and leaching time=6 h.     

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

Micromechanical viscoelasto‐plastic models and finite element implementation for rate‐independent and rate‐dependent permanent deformation of stone‐based materials

This paper presents parallel and serial viscoelasto‐plastic models to simulate the rate‐independent and the rate‐dependent permanent deformation of stone‐based materials, respectively. The generalized Maxwell viscoelastic and Chaboche's plastic models were employed to formulate the proposed parallel and serial viscoelasto‐plastic constitutive laws. The finite element (FE) implementation of the parallel model used a displacement‐based incremental formulation for the viscoelastic part and an elastic predictor—plastic corrector scheme for the elastoplastic component. The FE framework of the serial viscoelasto‐plastic model employed a viscoelastic predictor—plastic corrector algorithm. The stone‐based materials are consisted of irregular aggregates, matrix and air voids. This study used asphalt mixtures as an example. A digital sample was generated with imaging analysis from an optically scanned surface image of an asphalt mixture specimen. The modeling scheme employed continuum elements to mesh the effective matrix, and rigid bodies for aggregates. The ABAQUS user material subroutines defined with the proposed viscoelasto‐plastic matrix models were employed. The micromechanical FE simulations were conducted on the digital mixture sample with the viscoelasto‐plastic matrix models. The simulation results showed that the serial viscoelasto‐plastic matrix model generated more permanent deformation than the parallel one by using the identical material parameters and displacement loadings. The effect of loading rates on the material viscoelastic and viscoelasto‐plastic mixture behaviors was investigated. Permanent deformations under cyclic loadings were determined with FE simulations. The comparison studies showed that the simulation results correctly predicted the rate‐independent and rate‐dependent viscoelasto‐plastic constitutive properties of the proposed matrix models. Overall, these studies indicated that the developed micromechanical FE models have the abilities to predict the global viscoelasto‐plastic behaviors of the stone‐based materials. Copyright © 2009 John Wiley & Sons, Ltd.     

四川长宁石林地质遗迹景观资源特征及开发建议

长宁石林地质遗迹景观资源丰富,类型多样。最具代表性的景观资源是岩溶地貌,有溶洞、石林、天坑、漏斗、地缝、暗河、瀑布等,并有其他多种配套景观资源。这些地质景观资源具有重要的地学科研和美学观赏价值,具有较大的开发潜力。     

土石混合体分形几何特征与强度演化特征

针对土石混合体的结构性特点,以含石量为20%、30%、40%、50%、60%的土石混合体为研究对象,基于多重分形原理研究多重分形特征,研究分形维数与强度之间的关系。研究表明,土石混合体具有双重分形特征,不同尺度条件下具有不同分形指标,包括块石粒度、土体粒度以及平均粒度等分形维数,与含石量相关。单轴压缩试验表明,抗压强度随含石量增加呈现先增大后减小的趋势,根据单维分形特征,确定最优含石量约为40%。建立了含石量、不同分形维数指标与抗压强度之间的关系,分析了双重因素综合影响下抗压强度的变化特征,确定了含石量与分形维数之间存在最优区域。     

对一种振冲碎石桩复合地基沉降计算方法——Priebe法的改进

通过对经典的Priebe沉降计算法分析,以及面积置换率的变化对桩体压缩性假设作了改进;对桩土重度差异及承受荷载时应力和变形与深度的关系作了分析,归纳出相应的数学计算公式,用工程实例进行了验证。得到的结果表明改进是合理、适用的,可为今后的设计和施工提供参考。