基于OpenSees的RCS组合框架结构抗震性能模拟分析

选取已有钢筋混凝土柱—钢梁组合结构（RCS）框架的低周期反复试验数据,采用地震工程开源模拟软件OpenSees对其进行有限元模拟,对比骨架曲线与滞回曲线,试验结果与有限元结果吻合较好。随后考察弯矩放大系数（Mc/Mb=0.86、1.48、2.04）、柱轴压比（n=0.06、0.2、0.3、0.6、0.8）对抗震性能的影响,得到了各参数下框架的滞回曲线、骨架曲线和各特征阶段的荷载与位移值。分析了框架的破化过程、延性与强度退化。结果表明：RCS组合框架滞回曲线饱满,具有良好的变形及耗能能力;随着弯矩放大系数的减小、柱轴压比的增大,框架的水平极限承载力降低、屈服状态提前、位移延性降低。分析结果可供有关研究或工程应用参考。     

CFRP布约束增强高强混凝土柱抗震性能数值分析

采用地震工程开源模拟软件OpenSees（Open System for Earthquake Engineering Simulation）对CFRP（Carbon Fiber Reinforced Polymer,碳纤维增强复合材料）布加固高强钢筋混凝土方柱的抗震性能进行了数值分析。采用Steel02Material和Concrete02Material材料本构模型模拟了CFRP布加固高强混凝土方柱的抗震性能;在此基础上,进一步研究了轴压比和剪跨比这2个因素对试件抗震性能的影响。将所得数值分析结果与相同条件下的试验结果对比后发现：基于Steel02 Material和Concrete02 Material材料本构,利用OpenSees,可以较好地模拟CFRP布加固高强混凝土方柱的抗震性能,并且与试验结果（滞回曲线、骨架曲线、水平承载力和位移延性系数）能够较好地吻合,从而说明该数值分析方法还可以准确地反映出轴压比和剪跨比对高强混凝土柱抗震性能的影响规律。     

Seismic performance and global ductility of RC frames rehabilitated with retrofitted joints by CFRP laminates

This paper presents a new FRP retrofi tting scheme to strengthen local beam-column joints in reinforced concrete(RC) frames.The new retrofi tting scheme was proposed following a preliminary study of four different existing retrofi tting schemes.A numerical simulation was conducted to evaluate the effectiveness of FRP-strengthened reinforced concrete frames by bridging behavior of local joints to the whole structure.Local confi nement effects due to varying retrofi tting schemes in the joints were simulated in the frame model.The seismic behavior factor was used to evaluate the seismic performance of the strengthened RC frames.The results demonstrated that the new proposed retrofi tting scheme was robust and promising,and fi nite element analysis appropriately captured the strength and global ductility of the frame due to upgrading of the local joints.     

玉溪市自建民居的抗震性能分析

由于施工、材料、改建等因素的影响,自建民居往往达不到抗震设防的目标.本文以玉溪市某社区房屋为例,利用砖混结构的震害预测计算方法,探讨了加层及底层改建的做法对自建民居抗震性能的影响.计算分析结果表明：加层会减低民居的抗震性能,层数越多,抗震性能越弱,而底层改建更明显地降低了民居的抗震性能.     

水泥基速凝浆液裂隙扩散机制与压力特性试验研究

水泥基速凝浆液广泛应用于富水裂隙围岩注浆工程。为研究水泥基速凝浆液在裂隙注浆中的扩散机制与压力特性,选取水泥-水玻璃浆液及高聚物改性水泥浆液,采用不同水灰比及混合体积,开展了静水条件下单一平板裂隙的注浆扩散模型试验,通过监测浆液的注浆扩散形态和注浆过程中不同测点的压力变化,研究了水泥基速凝浆液的静水扩散规律和注浆扩散压力分布规律。试验结果表明,水泥-水玻璃浆液和高聚物改性水泥浆液具有相似的扩散形态和压力分布变化,两者的显著差别在于高聚物改性水泥浆液扩散所需的注浆压力明显小于水泥-水玻璃浆液,且凝结固化时间相对较长,有利于延长注浆扩散距离。研究结果应用于张马屯铁矿注浆堵水工程,解决了裂隙岩体渗漏水问题,实现了围岩稳定性控制。研究成果具有一定的理论和实践意义,对类似工程具有参考价值。     

珠江三角洲都市圈国内旅游者空间行为模式研究

以珠江三角洲（下称珠三角）都市圈国内主要客源地2009~2011年度中国100强旅行社官网旅游线路报价单为基础数据,研究了珠三角都市圈发展较为成熟阶段的旅游者空间行为模式及目的地类型,发现：① 珠三角都市圈旅游者空间行为模式总体上以营区基地式和完全环游式为主。不同客源地旅游者行为模式差异较大,广东省内旅游者以单目的地式和港澳小环游为主,其余客源地旅游者多采用营区基地式、往返式、区域环游式和完全环游式等旅行模式;② 珠三角都市圈各城市在旅游线路中出现的频次存在较大差异,总体呈现出3个等级层次关系,不同城市在大小珠三角都市圈以及不同客源地旅游线路中的角色与地位不同,据此得出珠三角都市圈各客源地的空间行为模式图;③ 比较大小珠三角都市圈在空间行为模式上的差异,发现港澳与珠三角地区在旅游发展上逐渐成为一个联系紧密的整体,但实现三地旅游一体化尚待时日。     

钢管约束混凝土压弯构件滞回性能的实验研究

进行了12个钢管约束混凝土压弯构件在往复荷载作用下的荷载-变形滞回性能的实验研究,包括6个圆试件和6个方试件。考察的主要参数是构件的轴压比。通过实验观察了这类构件在往复荷载作用下的破坏模态并分析了其荷载-变形滞回曲线的特点以及刚度退化规律,同时对钢管约束混凝土压弯构件极限承载力和抗弯刚度计算方法进行了初步探讨。     

方钢管混凝土框架在低周反复荷载作用下的非线性有限元分析

本文建立了方钢管混凝土框架结构的三维非线性有限元分析模型,用以研究方钢管混凝土框架在低周反复荷载作用下的抗震性能。该模型考虑了钢与混凝土的粘结滑移作用。通过与方钢管混凝土框架结构在低周反复荷载作用下试验所得的滞回曲线和刚度退化曲线的对比,发现该模型的计算结果较为精确,可以应用于方钢管混凝土框架的结构分析中。同时由试验和有限元分析计算的结果也可以得出结论,方钢管混凝土框架具有较好的抗震性能。     

Enhancing the mechanical properties of marine clay using cement solidification

Abstract

The use of soft clay and dredged marine clays as the construction material is challenging. This is because the high water content, high compressibility and low permeability of the clay causing the instability of ground and structure. This detrimental effect of soft clay can be improved by the cement solidification process, which is relatively cheap and efficient. This paper mainly focuses on the study of improvement on the mechanical behavior of cement mixed marine clay. The soil is reconstituted by using ordinary Portland cement of 5%, 10%, 15% and 20% by its mass. The study reveals that cementation of clay significantly improves the peak and residual strength of soil. Similarly, the primary yield stress of the soil is also improved from 16 to 275?kPa as cement content increases from 5% to 20%, respectively. By using statistical tools, the relationships between various parameters are established, which are very important to define the mechanical behavior of the clay. This study reveals that the yield surface of the solidified marine clay is not a smooth elliptical surface. Rather it is composed of two linear surfaces followed by a log-linear surface which can be modeled by using simple parameters obtained from triaxial tests.     

Cyclic behavior of natural organic clay under variable confining pressure that match traffic loading conditions

ABSTRACT

One-way cyclic loading is more typical for traffic loading and cyclic triaxial test has been recognized as a useful method for solving many engineering problems. Under traffic loading, the influence of variable confining pressure on cyclic behavior of natural organic clay subjected to cyclic traffic loading is rarely reported in the literature. In this study, a laboratory investigation on undrained cyclic behavior of natural organic clay is presented and conducted by cyclic triaxial apparatus. Tests are conducted by both constant confining pressure and variable confining pressure, to simulate the loading conditions induced by passing vehicles in actual engineering. Different stress levels are also considered in this study. By comparing between the results of constant confining pressure tests and variable confining pressure tests, it shows that the one-way cyclic behavior of organic clay is influenced significantly by variation of confining pressure, in terms of pore water pressure, permanent axial strain and stress–strain hysteretic loops.