湖南大坊金银矿氧化带特征及工业意义

湖南大坊金银矿位于耒阳—临武南北向构造带中段,控矿层位为石炭系中上统壶天群和下统梓门桥组白云岩。矿体受北西和北东向组扭裂面的控制,产于花岗闪长斑岩内外接触带。氧化带的有用组分为金和银,已圈定矿体7个,其平均品位Au 2.68 g/t,Ag26.20g/t。金的粒度以中—细粒为主,氰化浸出率在91％以上,银经槽浸回收率仅20-30%。鉴于金浸出率高,矿体埋藏浅。开采技术条件简单,交通方便等特点,值得开发利用。     

几种电法仪器在地质勘查中的应用

文章介绍了几类物探电法仪器的工作原理、技术特点和适用范围,强调了物探资料的合理解释必须与地质认识相结合的重要性,物探工作要做实做细,对物探原始资料要选择合理的方法与参量进行计算处理,结合一些具体的勘测实例,说明各种方法的有效性及其实际应用效果.     

"标准正态转换法"用于化探数据特征的"反推"以及系统误差的调平

将水系沉积物样本数据转换到具有岩石样样本数据特征的水平上,近似地称为水系沉积物样品的"反推".文章利用"标准正态转换法"对此作了一些探讨:将两者的样本数据都转换成标准正态分布的形态,在此基础上,再将水系沉积物样本数据转换到岩石样水平.该样本数据的总体特征具有岩石样样本的数据特征.该方法还可以对工作区内不同区块分析数据的系统误差进行调平.并以1∶ 25万四子王旗幅为例说明了该方法在这两方面的应用.     

瞬态瑞雷面波勘探技术在工程勘察评价中的应用

文章介绍了瞬态瑞雷面波勘探技术的理论基础和勘探原理、工作方法、资料的整理与解释，并结合工程实例说明瞬态面波勘探技术的应用效果。     

Modeling the seismic response of basin-edge structure by a sequential waveform method

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.     

基于FLAC3D岩石黏弹塑性流变模型的二次开发研究

由于岩土介质的复杂多样性,通用分析软件所提供的岩石流变本构模型往往不能满足工程实际数值分析的需要。依据FLAC3D（Version 2.1）所提供的二次开发程序接口,结合西原黏弹塑性流变模型分析了二次开发程序运行的基本原理,给出了西原流变模型具体实施的程序框图和代码编写中应该注意的几个关键技术。通过一个简单的算例验证了程序编制的正确性与可靠性。由于采用了面向对象的程序技术,FLAC3D二次开发接口更加简单实用,提供的研究思路可为其他流变本构模型的二次开发提供参考。     

Analysis of a rigid footing lying on three-layered soil using the finite difference method

A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff.     

三维张量CSAMT响应特征研究

张量CSAMT(可控源音频大地电磁法)能完整地描述三维的地电信息,更适应复杂地质条件下的地质勘探。采用将总场分解为一次场和二次场的策略,用差分近似微分形成大型线性方程组,通过解方程组得到张量CSAMT三维正演结果。通过计算低阻和高阻目标体的响应,发现卡尼亚视电阻率和视阻抗相位对低阻体表现为低值异常,对高阻体表现为高值异常,视阻抗相位达到极值时的频率比视电阻率达到极值时的频率要高。张量CSAMT对低阻体比高阻体更灵敏,在同样条件下,高阻体的异常区位置相比于低阻体会上移。某工区的勘察案例表明,根据卡尼亚视电阻率异常能定性地判断地下异常体的存在,为解决地质类问题提供了依据。本研究为张量CSAMT三维反演提供了基础。     

准噶尔盆地断拗转换期剥蚀厚度及其分布规律

准噶尔盆地为我国重要的陆上含油气盆地, 对其进行地层剥蚀厚度恢复能够有效地研究盆地演化历史以及油气资源评价.通过分析声波时差法的方法原理及其适用条件, 认为此方法适用于恢复准噶尔盆地断拗转换期剥蚀地层的厚度.实际计算结果表明: 断拗转换期上、中二叠统之间为主不整合, 剥蚀厚度大; 三叠系与二叠系之间形成次级不整合, 盆地剥蚀厚度相对较大, 区域位于西部盆缘地带, 自北西向南东剥蚀量逐步降低, 至盆地中心剥蚀量最低.各构造单元中, 凸起相比于凹陷所遭受的剥蚀程度较大, 反映古地貌呈现盆地西北缘高、腹部低的地形特征, 同时反映准噶尔盆地断拗转换期二叠纪晚期至三叠纪早期改造具西强东弱、边缘强内部弱的特点.     

接触摩擦问题的数值模拟

无网格伽辽金法(EFGM)可脱离单元的概念,特别适合岩体裂纹面的接触摩擦分析。基于EFGM,在裂纹面引入罚参数,通过迭代计算,得到裂纹面真实的应力状态,从而模拟闭合裂纹的粘接、滑移和张开行为,数值结果表明该方法是合理可行的。