复杂结构形式的海堤波浪力及波浪形态数值模拟

依据雷诺方程和k-ε紊流模型,按流体体积(VOF)法追踪波浪自由表面,采用源造波法,建立数值波浪水槽,数值模拟波浪对复杂结构形式海堤的作用.数值模拟结果与经验公式、物理模型试验结果基本符合,说明所建立的数值波浪水槽合理可行.揭示了不规则波作用下复杂结构形式海堤波浪力分布规律,模拟了堤前波浪形态变化,为探讨合理的海堤结构形式提供了依据.     

LEADAT: a MATLAB-based program for lead-210 data analysis of sediment cores

1Introduction Tracking the history of man s impact on the en-vironment, it is clear that in many places the periodof greatest impact and most dramatic transformationlies within the last 150 a (Oldfield and Appleby,1984). Many aspects of this impact can be…     

基于不完备模态信息的海洋平台损伤诊断研究

首先利用测量自由度正则化损伤指标向量得到损伤的大致区域;其次,在选定的区域内分别采用序列二次规划算法和最小二乘法来诊断损伤构件及其损伤程度,并对其结果进行了比较。数值模拟表明,仅需少量低阶模态和部分测量自由度,上述损伤诊断算法便可完成海洋平台的损伤诊断。     

DPD比色法测定电解海水产生的有效氯浓度

论文是用DPD(N,N-二乙基-1,4-苯二胺)比色法测定电解海水中的有效氯浓度,并将测定结果与碘量滴定法测定有效氯浓度相比较。此外,对该方法在海水中的实验条件进行了试验。结果得出,在海水环境下,DPD比色法在常温下,波长为550 nm,pH值6.5左右,显色后10 m in内测定。在海水中用此方法测定有效氯浓度的范围在0~2 m g/L,误差在5%以下。     

海水中A3钢样阴极保护电化学场的二维有限元计算

有限元法已被证明是计算阴极保护场中电位、电流密度分布的有效方法。作者建立了二维的有限元数学模型,并讨论了模型中电化学场的非线性边界条件的处理和非线性方程组的迭代法解法。用构建的模型对简单的阴极保护模拟体系进行了分析,得出了较合理的结果。     

海泥环境中阴极保护的边界元计算

根据阴极保护的特点,建立了用于数值计算的模型;采用边界元方法对海泥介质中的阴极保护系统进行了计算,获得了海泥中钢管表面以及海泥介质内部的电位分布。将计算的结果与测量的数据进行比较,两者具有较好的一致性。     

海洋环境立体监测系统的设计方法

“九五”和“十五”期间,在国家海洋863计划的支持下,我国分别在上海和台湾海峡及毗邻海域建立了两个区域性海洋环境立体监测示范系统。在这两个示范系统的技术研究成果的基础上,通过分析国际海洋立体监测系统的设计模型,提出了区域性海洋环境立体监测系统的设计原则和设计方法,包括:系统结构、数据与信息服务通信网络、数据处理中心、数据流程以及系统功能等方面的设计方法。     

基于双差定位法的鄂尔多斯块体西北缘地震精定位研究

针对鄂尔多斯块体西北缘地震活动的复杂性及目前台网定位方法存在偏差的问题,采用双差定位法对2009—2019年发生在鄂尔多斯块体西北缘的地震事件进行重新定位.经研究表明,双差定位之后地震分布更集中,鄂尔多斯块体西缘的地震沿银川吉兰泰断陷带分布,北缘的地震沿河套断陷带分布,地震定位精度明显提高,这与块体周缘复杂的地质构造背...     

Reduced Hamiltonian formalism for general-relativistic adiabatic fluids and applications

For the dynamics of general-relativistic adiabatic fluids a reduced Hamiltonian formalism is presented. For slowly moving fluids an approximation scheme is defined. The first steps of the scheme are worked out explicitly. Radiation damping and emission, and backscattering are discussed. The usefulness of the formalism for numerical relativity is pointed out.     

New instrument for measuring water discharge by the salt dilution method

The instantaneous salt dilution method for water discharge measurements in open channels has been improved by the development of a new instrument measuring conductivity. The salt method consists of two parts: the calibration and the actual measurement in the stream. The calibration aims to calculate the linear relationship between electrical conductivity and salt concentration at various degrees of dilution in a salt solution. The original undiluted solution is injected into the water of a stream and the conductivity is measured downstream from the injection site. When measuring, the new instrument integrates the conductivity over time. From the value obtained on the instrument's display, the water discharge can easily be calculated on a hand-PC in the field. The instrument has eliminated the subsequent calculation work formerly necessary. It has increased the accuracy of the method and also reduced the need for field personnel during measurements.