渤海海峡跨海通道建设对城市经济联系的影响分析

渤海海峡跨海通道建设将极大改变环渤海乃至整个东部沿海的交通格局,势必对其目标城市大连、烟台带来直接的经济影响,同时也会对辽东半岛、山东半岛乃至东北、华北和华东不同尺度地区的经济联系产生深远影响。文章选取山东省17个和辽宁省14个地级市的地区的生产总值、城市人口以及城市间的最短时间距离等指标,测度渤海海峡跨海通道建成前后,对山东、辽宁两省区域城市经济联系的影响。研究表明:渤海海峡跨海通道建成后,对大连、烟台间的经济联系强度有显著提高,各城市经济联系度的平均增幅明显不同;同时,受距离衰减规律的影响,两省的城市分别以大连、烟台为中心,根据距离远近及城市自身发展程度分为4个层次,经济联系强度由内向外逐层次减弱;从整体上看,渤海通道的建设对带动两省城市之间的经济联系度都有大幅度提升。     

A field test of a linear stability model for crescentic bars

A morphodynamical linear stability analysis is used to predict the natural development of crescentic bed patterns and rip channels. The purpose is to investigate whether this technique, which is useful for understanding the physics of emerging bed-forms, can be used to make quantitative predictions in the field, which may then be of use for coastal engineers.     

A comparison of the main methods for estimating probabilities of extreme still water levels

Sea-level return periods are estimated at 18 sites around the English Channel using: (i) the annual maxima method; (ii) the r-largest method; (iii) the joint probability method; and (iv) the revised joint probability method. Tests are undertaken to determine how sensitive these four methods are to three factors which may significantly influence the results; (a) the treatment of the long-term trends in extreme sea level; (b) the relative magnitudes of the tidal and non-tidal components of sea level; and (c) the frequency, length and completeness of the available data. Results show that unless sea-level records with lengths of at least 50 years are used, the way in which the long-term trends is handled in the different methods can lead to significant differences in the estimated return levels. The direct methods (i.e. methods i and ii) underestimate the long (> 20 years) period return levels when the astronomical tidal variations of sea level (relative to a mean of zero) are about twice that of the non-tidal variations. The performance of each of the four methods is assessed using prediction errors (the difference between the return periods of the observed maximum level at each site and the corresponding data range). Finally, return periods, estimated using the four methods, are compared with estimates from the spatial revised joint probability method along the UK south coast and are found to be significantly larger at most sites along this coast, due to the comparatively short records originally used to calibrate the model in this area. The revised joint probability method is found to have the lowest prediction errors at most sites analysed and this method is recommended for application wherever possible. However, no method can compensate for poor data.     

Effects of wave–current interaction on the current profile

Wave–current laboratory experiments have shown that the logarithmic current profile observed in pure current flows is modified due to the presence of waves. When waves propagate opposite the current, an increase in the current intensity is achieved near the mean water level, while a reduction is obtained for following waves and currents. With the aim of analyzing these nonlinear effects along the whole water column, an Eulerian wave–current model is presented. In contrast to previously presented wave–current models, the present is able to include the variation of the free surface elevation due to the wave motion and the effect of a non hydrostatic pressure field. Therefore it does not restrict its application to waves in shallow waters. Moreover, the model is able to simulate all the possible angles between waves and currents.     

Interactions between submarine channel systems and deformation in deepwater fold belts: Examples from the Levant Basin, Eastern Mediterranean sea

Submarine channel levee systems form important hydrocarbon reservoirs in many deep marine settings and are often deposited within a structurally active setting. This study focuses on recent submarine channels that developed within a deepwater fold and thrust belt setting from the Levant Basin, eastern Mediterranean Sea. Compressional deformation within the study area is driven by the up-dip collapse of the Nile cone above the ductile Messinian Evaporites. Structures such as folds and strike slip faults exert a strong control on channel location and development over time. From this study four end-member submarine channel–structure interactions can be defined: Confinement, diversion, deflection and blocking. Each of these channel–structure interactions results in a distinct submarine channel morphology and pattern of development compared to unconfined channel levee systems. Each interaction can also be used to assess timing relationships between submarine channel development and deformation.     

A traversing system to measure bottom boundary layer hydraulic properties

This study describes a new convenient and robust system developed to measure benthic boundary layer properties, with emphasis placed on the determination of bed shear stress and roughness height distribution within estuarine systems by using velocity measurements. This system consisted of a remotely operated motorised traverser that allowed a single ADV to collect data between 0 and 1 m above the bed. As a case study, we applied the proposed traversing system to investigate bottom boundary layer (BBL) hydraulic properties within Coombabah Creek, Queensland, Australia. Four commonly-employed techniques: (1) Log-Profile (LP); (2) Reynolds stress (RS); (3) Turbulent Kinetic Energy (TKE); and (4) Inertial Dissipation (ID) used to estimate bed shear stresses from velocity measurements were compared. Bed shear stresses estimated with these four methods agreed reasonably well; of these, the LP method was found to be most useful and reliable. Additionally, the LP method permits the calculation of roughness height, which the other three methods do not. An average value of bed shear stress of 0.46 N/m², roughness height of 4.3 mm, and drag coefficient of 0.0054 were observed within Coombabah Creek. Results are consistent with that reported for several other silty bed estuaries.     

Estimation of the wave-related ripple characteristics and induced bed shear stress

A large data set on ripples was collected and examined. A set of new formulas for the prediction of the ripple characteristics is proposed with an emphasis on the disappearance of the ripples. The ripple wavelength was observed to be proportional to the bottom wave excursion but also to be a function of the grain-related Shields parameter and wave period parameter introduced by Mogridge et al. (1994). The ripple steepness was found to be nearly constant for orbital ripples, and with a sharp decrease for suborbital ripples. Two empirical functions are added including the effects of the critical Shields parameters (inception of transport and inception of sheet flow), i.e. giving the boundaries for the ripple existence's domain. The proposed formulas yield better prediction capabilities compared to the previously published formulas, especially when ripples are washed out. The effect of the ripple characteristics on the roughness height and the calculation of the bed shear stress is also discussed. It appeared that the bed shear stress calculation is more sensitive to the empirical coefficient a_r introduced in the estimation of the ripple-induced roughness height or to the limits of existence of the ripples than the ripple characteristics themselves.     

循环流化床燃煤脱硫剂技术研究现状及开发前景

本文论述了循环流化床在煤燃烧领域中的优势地位,并着重阐述了国内外循环流化床脱硫技术研究与脱硫剂开发利用状况,指出了在脱硫剂应用方面与国外的差距,提出了脱硫剂生产的产业化发展方向。     

Application of a Bayesian model to infer the contribution of coalbed natural gas produced water to the Powder River,Wyoming and Montana

The Powder River Basin (PRB) of Wyoming and Montana contains significant coal and coal bed natural gas (CBNG) resources. CBNG extraction requires the production of large volumes of water, much of which is discharged into existing drainages. Compared to surface waters, the CBNG produced water is high in sodium relative to calcium and magnesium, elevating the sodium adsorption ratio (SAR). To mitigate the possible impact this produced water may have on the quality of surface water used for irrigation, the State of Montana passed water anti‐degradation legislation, which could affect CBNG production in Wyoming. In this study, we sought to determine the proportion of CBNG produced water discharged to tributaries that reaches the Powder River by implementing a four end‐member mixing model within a Bayesian statistical framework. The model accounts for the ⁸⁷Sr/⁸⁶Sr, δ¹³C_DIC, [Sr] and [DIC] of CBNG produced water and surface water interacting with the three primary lithologies exposed in the PRB. The model estimates the relative contribution of the end members to the river water, while incorporating uncertainty associated with measurement and process error. Model results confirm that both of the tributaries associated with high CBNG activity are mostly composed of CBNG produced water (70–100%). The model indicates that up to 50% of the Powder River is composed of CBNG produced water downstream from the CBNG tributaries, decreasing with distance by dilution from non‐CBNG impacted tributaries from the point sources to ~10–20% at the Montana border. This amount of CBNG produced water does not significantly affect the SAR or electrical conductivity of the Powder River in Montana. Copyright © 2013 John Wiley & Sons, Ltd.