柴达木盆地东台吉乃尔盐湖盐类沉积特征及成盐年代的初步研究

东台吉乃尔盐湖经过长期的成盐演化和成矿过程 ,最终形成了以氯化钠化学沉积为主的蒸发盐 ,晶间卤水富含B、Li等多种元素卤水矿床 ,根据 1998年对该湖干盐滩中部所打的CK1孔钻孔剖面( 12m)及测试的几个14 C年龄 ,初步证实该盐湖上部盐层是在约 10 0 0 0aBP形成 ,未经碳酸盐和硫酸盐成盐阶段 ,盐湖形成初期即进入氯化物成盐阶段。     

Fe3+纳米胶体颗粒的光吸收边蓝移与溶液中Al/Fe比的关系

合成了n（Al）／n（Fe）和碱化度不同的45个聚合氯化铝铁（PAFC）样品,进行了光谱分析,结果显示光吸收边蓝移或红移以及Fe（Ⅲ）羟基氧化物和Al-Fe共聚体纳米胶体颗粒大小分布与溶液的Al／Fe比和碱化度（B=[OH]／[Al＋Fe]）密切相关。电镜观察和电子衍射分析表明：Al（Ⅲ）的加入使Fe（Ⅲ）羟基氧化物和Al-Fe共聚体纳米胶体颗粒变小、有序度降低是造成PAFE光吸收边蓝移和保持胶体颗粒在亚稳定状态下存在的重要原因。当n（Al）／n（Fe）〉8：2后,PAFC溶液中Fe（Ⅲ）羟基氧化物和Al-Fe共聚体胶体主要以〈10m的纳米颗粒形态存在,对应的光谱能级提高到26000cm^-1以上,且各种曰值下Fe^3＋的光谱能级趋于一致。这表明,在大量Al（Ⅲ）存在条件下,PAFE中Fe3^＋的所处的化学环境相似。点能谱分析显示,n（Al）／n（Fe）=4：6的样品中颗粒物的化学计量比最接近AlOOH,FeOOH,溶液的稳定性最差。     

高温高压下流体中电解质活度系数的确定

高温高压下流体中电解质的活度系数在地球化学领域有着广泛的应用。本实验测量了100—500℃、0．11—12GPa下0．01mol／L KCl溶液的电导率,并利用Hueckel方程由实验确定的摩尔电导和极限摩尔电导计算出了KCl的平均摩尔活度系数。平均摩尔活度系数随温度升高而减小,随压力升高而增大,而在高温高压下随温度压力的升高几乎保持恒定。     

三元体系CaCl2?SrCl2?H2O的相平衡及其在钙锶分离中的应用

采用等温溶解平衡法研究了三元体系CaCl₂?SrCl₂?H₂O温度从323.15 K到353.15 K范围内的相平衡。基于该三元体系多温下的相平衡数据,设计开展了实验室模拟南翼山油田卤水中氯化钙和氯化锶在温度323.15 K下的分离实验。实验室模拟钙锶分离实验结果表明,在323.15 K下时分离一次固相产品中的钙锶摩尔比可以从25.46:1降至1.73:1,SrCl₂的回收率为52.47 %,所得一次固相产品在323.15 K下溶解并再次蒸发。钙和锶的摩尔比从1.73:1降至1.1:1,SrCl₂的回收率为78.67 %。     

山东刚玉巨晶中包裹体研究Ⅱ：氯化物与地幔液相的物质组成

利用电子探针,扫描电镜在山东碱性玄武岩中产出的刚玉巨晶中发现了许多氯化物包裹体,这些氯化物可能以石盐为主,它的发现表明在较浅深度的地幔液相中也存在较多的氯。     

Biomass Burning in Southern Africa: Individual Particle Characterization of Atmospheric Aerosols and Savanna Fire Samples

Ambient atmospheric aerosols and savanna fireparticulate emission samples from southern Africa werecharacterised in terms of particle classes and theirnumber abundance by electron probe X-ray microanalysis(EPXMA). About ten particle classes were identifiedfor each sample. The major classes werealuminosilicates and sea salts for ambient coarse(2–10 m equivalent aerodynamic diameter (EAD))samples, and K-S and S-only particles for ambient fine(<2 m EAD) samples. The K-S particles are oneof the major products of biomass burning. The EPXMAresults were found to be consistent with the resultsfrom bulk analyses on a sample by sample basis. Forsavanna fire fine samples, quantitative EPXMA revealedthat many particles had a composition of simple saltssuch as KCl. Some particles had a deviatingcomposition in the sense that more ionic species wereinvolved in sustaining the balance between cations andanions, and they were composite or mixed salts.Because of extensive processing during the atmospherictransport, the composition of the K-S particles in theambient samples was different from K₂SO₄,and such particles were enriched with S. The finepyrogenic KCl particles and the fine sea-saltparticles were much depleted in chlorine.     

硫氰酸盐比色法测定钨的改进

硫氰酸盐比色法测定钨是基于W5+与硫氰酸盐形成黄色络合物。为使钨完全还原为5价,通常单独使用三氯化钛或氯化亚锡作还原剂。此方法在应用过程中,由于Ti3+本身呈紫色,加多会掩盖络合物的黄色,加少则出现硫氰酸铁之红色丝状物影响比色的情况。通过大量的试验,采用氯化亚锡-三氯化钛作双还原剂,控制最佳酸度、温度和时间,从而获得稳定的络合物,提高了分析结果的稳定性。通过对国家一级标准物质进行分析验证,从而证实方法可行,能够保证样品的测试精密度和准确度。本方法尤其适用于低含量、大批量钨矿样品的测定。     

水位波动下的呼伦湖上覆水体与沉积物间隙水之间溶质的运移特征

为了探求内蒙古呼伦湖上覆水体和沉积物间隙水之间溶质运移机制,对呼伦湖的1个沉积物柱芯的间隙水、3个湖泊水体以及湖周边7个地下水体中的氯离子(Cl~-),氢、氧稳定同位素(δD和δ~(18)O)分别进行分析测试,并利用其示踪性对沉积物中溶质运移特征进行研究.结果显示,δD、δ~(18)O和Cl~-浓度在不同水体中的分布具有相似的分布规律,整体上从底部沉积物到上部湖水浓度分布呈现逐渐递减的抛物线趋势,在间隙水中最大值位于所取沉积物柱芯的最深处,Cl~-浓度为306 mg/L,δD和δ~(18)O分别为-58‰和-5.9‰;最小值位于沉积物柱芯上层,并与上覆水体中的值相似,Cl~-浓度为159 mg/L,δD和δ~(18)O分别为-66‰和-7.3‰.为了明确沉积物柱芯中间隙水的高浓度Cl~-和偏正δD、δ~(18)O的来源,比较不同水体的δ~(18)O-δD关系点分布,表明含有偏正值的δD、δ~(18)O和高浓度Cl~-的间隙水与上覆湖水关系密切,可能是由于低水位时期湖水与间隙水相互发生扩散作用而产生的结果.一维对流扩散迁移模型证实扩散作用是控制着沉积物间隙水中溶质浓度在垂向上分布的主要机制,同时湖水水位的变化会影响沉积物间隙水与上覆水体的扩散过程,特别是在水位上升期,富集在沉积物中的溶质可能成为湖水的重要物质来源,影响上覆水体的水质.因此,对于封闭湖泊水位的控制和管理不仅在维持湖泊水量方面有着直接的作用,同时在稳定湖泊水质条件上也有着重要的意义.     

钢筋混凝土结构电渗阻锈技术研究

通过测量电渗阻锈过程中阻锈剂渗入量、脱盐率以及钢筋极化电阻,研究了混凝土技术参数和电渗电量对电渗阻锈效果的影响.试验结果表明,电渗阻锈技术能在脱除盐污染混凝土中氯离子的同时,将有效阻锈基团快速迁移到钢筋表面,使已腐蚀的钢筋快速恢复钝化而达到防腐的目的.     

Modelling of chloride ingress into concrete through a single‐ion approach. Application to an idealized surface crack pattern

The paper examines ion (chloride) transport equations in porous media (concrete) integrated over a representative elementary volume, that is to say, averaging over the macroscopic level the phenomena that occur really at the pore scale. There are three basic variables to be used: chloride concentration, moisture and temperature. The diffusion process is examined, in addition to other phenomena such as convection (the motion of dissolved substances caused by flow of water in a pore solution of partially saturated media) or chloride binding (the capacity of free chloride of being chemically bound, particularly with C₃A to form Friedel salts). Contrary to other approaches, such effects are not considered by means of apparent diffusion coefficients but by developing the complete set of time‐dependent equations for both the chloride concentration within the pore solution and the moisture content within the pore space. Once the general model is described, the system of equations can be solved numerically by means of a two‐dimensional finite element formulation. The main objective is to reproduce results of experimental tests by means of a priori parameter estimation, according to the characteristics of materials and external environment conditions, thereby superseding the well‐known best fit a posteriori through Fick's second equation. While the introduction of hygrometric conditions and convection phenomena appears to be of high significance, other factors like temperature, surface concentration, chloride binding or equivalent hydration time are analysed too. The proposed model can reproduce bidimensional complex geometries, for example, cracked concrete cover, as well as variable surface condition. An application case is developed through a realistic model of the geometry of a crack. Copyright © 2014 John Wiley & Sons, Ltd.