磁共振用于医学成像与地面找水方法的技术对比研究

目的 医学核磁共振与地面核磁共振找水是核磁共振技术应用的不同领域。本文通过对二者在方法原理、技术、应用等方面的对比研究，提出了地面核磁共振找水工作建议。     

高耸塔架结构节点损伤基于神经网络的两步诊断法

本文针对高耸钢塔架结构的损伤特点，建立了具有节点损伤的有限元模型，提出了一种分层神经网络两步诊断法：第一步，由基于区域残余力理论的第一层神经网络进行结构损伤区域的初诊；第二步，由基于应变模态理论的第二层神经网络进行损伤区域内的具体损伤节点位置和程度的诊断。对一平面塔架结构的数值仿真分析表明：本文提出的损伤诊断方法的结果是令人满意的。     

截渗墙(防渗墙)质量检测技术研究进展

截渗墙是堤坝整治的重要手段，但由于截渗墙施工质量不易控制，并且具有隐蔽性等特点，截渗墙的质量检测非常重要且存在不小的难度。本文首先简要介绍了近年来得到研究与实践的一些截渗墙质量检测技术，并对各种检测技术的特点进行了分析，最后推荐了截渗墙(防渗墙)质量检测的技术方案。     

Quantitative Evaluation of Water Deposited By Dew on Monuments

Samples of White and Green Carrara marble, and three types oflimestone and brick exposed in the field vertically and horizontally were used to evaluate condensationon monuments during clear sky nights. Experiments in a simulation chamber under controlledconditions led to a general equation for the actual amount of water deposited on a surface by dew.This is determined by: How much and for how long the surface temperature falls below the dew point,the moisture content in the air and the ventilation. On clear nights, the condensation on buildingstructures facing the sky may reach some 0.2 kg m^-2 (or 0.2 mm), whereas condensation on verticalsurfaces is very small. Computation of the seasonal trend of night-time condensationshowed that the maximum amount of water condensed per night occurs in the autumn, with the moreabundant concentration of moisture in the air. The total amount of water condensed per month isfound to be a maximum in the summer-autumn period. Morning condensationfor the thermal inertia of monuments is also relevant, and has been calculated to reach the same order of magnitude as thenocturnal dew. A detailed analysis of the temperature and mixing ratio profiles near a condensingsurface has shown two different situations. In still air, the two profiles follow an exponentiallaw and the thermal and the concentration layers lie within a few tens of millimetres. Inthe presence of turbulence, the thickness of these two layers is dramatically reduced. In still air, infront of a vertical, chilly surface, the deposition rate of air pollutants by thermophoresis and/orStefan flow is increased by 3 or 4 times in comparison with a horizontal surface. In the presence ofturbulence, the thickness of the thermal and concentration layers was dramatically reduced, makingthese two kinds of deposition much faster.     

地震层析成像在水利水电工程地质勘察中的应用

水利水电工程地质勘察是水利水电工程建设中的基础工作。地震层析成像技术作为一种新的物探方法，通过工程中孔，碉间地质条件的探测，进而评价大坝建筑物的工程地质条件是一种有效的手段。本文介绍了乌江构皮滩水利枢纽的应用效果。     

数据采集中特征点粗差定位方法的探讨

本文分析了特征点应满足的几种条件，给出了一次范围最小（Ｌ１）法，最小二乘法以及粗差探测法进行特征点粗差定位方法，并以模拟实例为例对它们进行了比较，得出了一些有意义的结论。     

地质雷达在隧道检测中的应用

隧道施工完成后用常规方法很难对衬砌质量做出系统评价，地质雷达利用超高频脉冲电磁波探测目标介质的介电常数，很容易掌握砼衬砌结构的厚度、衬砌周围回填及空隙情况，围岩断层裂隙构造情况等，为工程技术评价提供依据。文章以实例，介绍了利用地质雷达对隧道进行检测所使用的仪器、工作参数及地质雷达资料处理解释步骤，并通过对几幅典型雷达图像进行分析介绍了不同异常结构在雷达剖面上的反映。     

Laboratory and case studies of thermal cycling and stored strain on the stability of selected marbles

Studies of marble panels from the exterior of two buildings document the processes leading to bowing of the material. Bowing of panels is most extensive in those areas that are exposed to direct or reflected thermal energy. The thermal anisotropic behavior of calcite results in grain-boundary separation, grain sliding and microfracturing. The resulting loss of strength is one factor leading to bowing. The development of bows further reduces the panel strength as the outer portions elongate by inelastic deformation mechanisms. Laboratory experiments cycling marble samples for over 200 cycles at three temperatures up to 107°C above room conditions show similar strength losses as the natural situation. The second factor contributing to the bowing process is the release of residual elastic strain. The strain is in part stored in the marble from its geologic history, but may also be accumulated during thermal cycling due to the properties of calcite. Marble panels have been found to bow when stored outside, but not attached to any framework, indicating that the release of residual strain is a critical factor in producing the bows.     

Applicability of a Backprojection Algorithm to Reconstruct Images of Subsurface Horizontal Planes for Laboratory Experiments in Electrical Resistance Tomography

This paper describes the use of a backprojection algorithm to reconstruct subsurface images of the electrical resistivity in horizontal planes parallel to the surface. The algorithm can be applied to detect buried objects such as tanks or pipes and possible leakages from them. Two imaging strategies are compared: juxtaposition of vertical planes, and 3D reconstruction from the sensitivity matrix corresponding to the entire volume whose surface is explored. The electrode arrays used for voltage measurement are the dipole–dipole array and a modified Schlumberger array. A personal computer controls current injection, electrode switching, and voltage detection. The system injects 1 kHz, 20 V peak-to-peak square waveforms, thus avoiding electrode polarization effects. Experimental laboratory measurements show that the algorithm detects localized objects such as an insulating sphere and a conductive cylinder immersed in water. Furthermore, covering half of the cylinder by a rubber sleeve to simulate a nonconductive leak, yields a distinct image for the leak. The backprojection algorithm does not need any regularization parameter and it is very fast in inverting the sensitivity matrix because it approximates the inverse matrix by its transposed. The dipole–dipole array usually yields a lower overall pixel error than the modified Schlumberger array but both allow the detection of simulated underground leaks.