Product study of the reaction of OH radicals with isoprene in the atmosphere simulation chamber SAPHIR

Atmospheric oxidation of isoprene and its oxidation products methacrolein (MACR) and methyl vinyl ketone (MVK) have an important impact on the photochemical activity in the boundary layer, in particular in forested areas. The oxidation of isoprene by OH radicals was investigated in chamber experiments conducted under tropospheric conditions in the atmosphere simulation chamber SAPHIR at the Research Center Jülich. The aim was to determine the product yield of MVK and MACR in the OH-induced isoprene oxidation and the rate constant of their reaction with OH under real atmospheric conditions. The recently published updated degradation scheme for isoprene from Geiger et al. (2003) was used to determine rate constants and product yields. The fractional yields in the isoprene peroxy radical reaction with NO were found to be 0.41±0.03 for MVK and 0.27±0.03 for MACR. The rate coefficient for MACR with OH was found to be in very good agreement with the recommended value of IUPAC Atkinson (Atkinson et al., 2005). while the rate coefficient for MVK with OH was 27% lower.     

Volatile Organic Compounds in the Po Basin. Part B: Biogenic VOCs

Measurements of volatile organic compounds (VOCs) were performed in the Po Basin, northern Italy in early summer 1998, summer 2002, and autumn 2003. During the three campaigns, trace gases and meteorological parameters were measured at a semi-rural station, around 35 km north of the city center of Milan. Bimodal diurnal cycles of isoprene with highest concentrations in the morning and evening were found and could be explained by the interaction of emissions, chemical reactions, and vertical mixing. The diurnal cycle could be qualitatively reproduced by a three-dimensional Eulerian model. The nighttime decay of isoprene could be attributed mostly to reactions with NO₃, while the decay of the isoprene oxidation products could not be explained with the considered chemical reactions. Methanol reached very high mixing ratios, up to 150 ppb. High concentrations with considerable variability occurred during nights with high relative humidities and low wind speeds. The origin of these nighttime methanol concentrations is most likely local and biogenic but the specific source could not be identified.     

Simulations of seasonal variations of sulfur compounds in the remote marine atmosphere

A photochemical box model is used to simulate seasonal variations in concentrations of sulfur compounds at latitude 40° S. It is assumed that the hydroxyl radical (OH) addition reaction to sulfur in the dimethyl sulfide (DMS) molecule is the predominant pathway for methanesulfonic acid (MSA) production, and that the rate constant increases as the air temperature decreases. Concentration of the nitrate radical (NO₃) is a function of the DMS flux, because the reaction of DMS with NO₃ is the most important loss mechanism of NO₃. While the diurnally averaged concentration of OH in winter is a factor of about 8 smaller than in summer, due to the weak photolysis process, the diurnally averaged concentration of NO₃ in winter is a factor of about 4–5 larger than in summer, due to the decrease of DMS flux. Therefore, at middle and high latitudes in winter, atmospheric DMS is mainly oxidized by the reaction with NO₃. The calculated ratio of the MSA to SO₂ production rates is smaller in winter than in summer, and the MSA to non-sea-salt sulfate (nssSO₄ ^2-) molar ratio varies seasonally. This result agrees with data on the seasonal variation of the MSA/nssSO₄ ^2- molar ratio obtained at middle and high latitudes. The calculations indicate that during winter the reaction of DMS with NO₃ is likely to be a more important sink of NO_x (NO+NO₂) than the reaction of NO₂ with OH, and to serve as a significant pathway of the HNO₃ production. If dimethyl sulfoxide (DMSO) is produced through the OH addition reaction and is heterogeneously oxidized in aqueous solutions, half of the nssSO₄ ^2- produced in summer may be through the oxidation process of DMSO. It is necessary to further investigate the oxidation products by the reaction of DMS with OH, and the possibility of the reaction of DMS with NO₃ during winter.     

A Laboratory and Theoretical Study on the Uptake of SO2 Gas by Large and Small Water Drops Containing Heavy Metal Ions

Laboratory experiments have been carried out to investigate the uptake of sulfur dioxide by water drops containing heavy metal ions where the metal ions serve as catalysts to oxidise the taken up S(IV) into S(VI). During the gas uptake the drops were freely suspended at their terminal velocity in the airstream of the Mainz vertical wind tunnel. Two series of experiments were carried out, one with large millimeter size water drops containing manganese or iron ions, and the other with small water drops containing manganese ions and having radii in hundreds of micron size range. The experimental results were compared against model computations using the Kronig–Brink model and the fully mixed model, modified for the case that heavy metal ions present in the liquid phase act as catalysts for the oxidising process. The results of the model calculations show that there are only small differences between the predicted gas uptake according to the two models. In addition it was found that the experimental obtained results from the uptake of SO₂ by water drops containing heavy metal ions for both, large and small water drops did agree with the model results.     

The tropospheric distribution of formaldehyde during TROPOZ II

A series of 149 measurements of the HCHO mixing ratio were made between 0 and 10 km altitude and 70° N to 60° S latitude during TROPOZ II. The data show a vertical decrease of the HCHO mixing ratio with altitude at all latitudes and a broad latitudinal maximum in the HCHO mixing ratio between 30° N and 30° S at all altitudes. The measured mixing ratios of HCHO are considerably higher than those expected from CH₄ oxidation alone, but agree broadly with the average latitude by altitude distribution of HCHO derived by a 2D model including emissions of C₁–C₇ hydrocarbons. A number of the regional scale deviations of the measured HCHO distribution from the average modelled one can be explained in terms of the local wind field.     

A Study of DMS Oxidation in the Tropics: Comparison of Christmas Island Field Observations of DMS, SO2, and DMSO with Model Simulations

This study reports comparisonsbetween model simulations, based on current sulfurmechanisms, with the DMS, SO₂ and DMSOobservational data reported by Bandy et al.(1996) in their 1994 Christmas Island field study. For both DMS and SO₂, the model results werefound to be in excellent agreement with theobservations when the observations were filtered so asto establish a common meteorological environment. Thisfiltered DMS and SO₂ data encompassedapproximately half of the total sampled days. Basedon these composite profiles, it was shown thatoxidation of DMS via OH was the dominant pathway withno more than 5 to 15% proceeding through Cl atoms andless than 3% through NO₃. This analysis wasbased on an estimated DMS sea-to-air flux of 3.4 ×10⁹ molecs cm^-2 s^-1. The dominant sourceof BL SO₂ was oxidation of DMS, the overallconversion efficiency being evaluated at 0.65 ± 0.15. The major loss of SO₂ was deposition to theocean's surface and scavenging by aerosol. Theresulting combined first order k value was estimated at 1.6 × 10^-5 s^-1. In contrast to the DMSand SO₂ simulations, the model under-predictedthe observed DMSO levels by nearly a factor of 50. Although DMSO instrument measurement problems can notbe totally ruled out, the possibility of DMSO sourcesother than gas phase oxidation of DMS must beseriously considered and should be explored in futurestudies.     

The Influence of Oxalate on Fe-Catalyzed S(IV) Oxidation by Oxygen in Aqueous Solution

This study demonstrates that oxalate has a strong inhibiting effect onFe-catalyzed S(IV) oxidation by oxygen in aqueous solution. While thepseudo-first order rate constant of S(IV) oxidation was determined to be1.6 × 10³ M^-1 s^-1 in experimentswithout oxalate, the oxidation of S(IV) was totally inhibited at a molarconcentration ratio of iron:oxalate = 1:5 at an oxalate concentration of 4M. Under these conditions, the Fe(II)/Fe(III) ratio remained nearlyconstant during the observed reaction time. The determined rate constants wereindependent of the initial oxidation state of iron. However, with increasingconcentrations of oxalate, a longer induction period is observed forexperiments with iron initially in the Fe(II) oxidation state.     

DMS and SO2 at Baring Head, New Zealand: Implications for the Yield of SO2 from DMS

Atmospheric dimethyl sulfide (DMS) and sulfur dioxide (SO₂) concentrations were measured at Baring Head, New Zealandduring February and March 2000. Anti-correlated DMS and SO₂ diurnalcycles, consistent with the photochemical production of SO₂ from DMS, were observed in clean southerly air off the ocean. The data is used to infer a yield of SO₂ from DMS oxidation. The estimated yields are highly dependent on assumptions about the DMS oxidation rate. Fitting the measured data in a photochemical box model using model-generated OH levels and the Hynes et al. (1986) DMS + OH rate constant suggests that theSO₂ yield is 50–100%, similar to current estimates for the tropical Pacific.However, the observed amplitude of the DMS diurnal cycle suggests that the oxidation rate is higher than that used by the model, and therefore, that theSO₂ yield is lower in the range of 20–40%.     

Evaluating the feasibility of multitemporal hyperspectral remote sensing for monitoring bioremediation

In recent years, several studies focused on the detection of hydrocarbon pollution in the environment using hyperspectral remote sensing. Particularly the indirect detection of hydrocarbon pollution, using vegetation reflectance in the red edge region, has been studied extensively. Bioremediation is one of the methods that can be applied to clean up polluted sites. So far, there have been no studies on monitoring of bioremediation using (hyperspectral) remote sensing. This study evaluates the feasibility of hyperspectral remote sensing for monitoring the effect of bioremediation over time. Benzene leakage at connection points along a pipeline was monitored by comparing the red edge position (REP) in 2005 and 2008 using HyMap airborne hyperspectral images. REP values were normalized in order to enhance local variations caused by a change in benzene concentrations. 11 out of 17 locations were classified correctly as remediated, still polluted, or still clean, with a total accuracy of 65%. When only polluted locations that were remediated were taken into account, the (user's) accuracy was 71%.