岩溶作用及其碳汇强度计算的“入渗-平衡化学法”——兼论水化学径流法和溶蚀试片法

岩溶作用通过碳酸盐岩溶解时消耗大气或土壤CO2成为重要的碳汇过程。本文首先简要介绍了定量评价岩溶作用及其碳汇强度的水化学径流法和碳酸盐岩溶蚀试片法及其优缺点,即水化学径流法仅适用于边界清楚且为全排型的流域,而试片法仅适用于土壤中不含碳酸盐矿物的条件。继而推导出了岩溶作用及其碳汇强度计算的“入渗-平衡化学法”(或称“潜在最大溶蚀法”),该方法的优点在于只要知道了相关地区的基本气候资料,如温度、降水和蒸发蒸腾数据,即可计算出该地区的岩溶作用及其碳汇强度。      

Sources and depositional processes of tsunami deposits: Analysis using foraminiferal tests and hydrodynamic verification

Foraminiferal tests are commonly found in tsunami deposits and provide evidence of transport of sea floor sediments, sometimes from source areas more than 100 m deep and several kilometers away. These data contribute to estimates of the physical properties of tsunami waves, such as their amplitude and period. The tractive force of tsunami waves is inversely proportional to the water depth at sediment source areas, whereas the horizontal sediment transport distance by tsunami waves is proportional to the wave period and amplitude. We derived formulas for the amplitudes and periods of tsunami waves as functions of water depth at the sediment source area and sediment transport distance based on foraminiferal assemblages in tsunami deposits. We applied these formulas to derive wave amplitudes and periods from data on tsunami deposits in previous studies. For some examples, estimated wave parameters were reasonable matches for the actual tsunamis, although other cases had improbably large values. Such inconsistencies probably reflect: (i) local amplification of tsunami waves by submarine topography, such as submarine canyons; and (ii) errors in estimated water depth at the sediment source area and sediment transport distance, which mainly derive from insufficient identification of foraminiferal tests.     

Torsionally coupled dynamic performance analysis of asymmetric offshore platforms subjected to wave and earthquake loadings

The dynamic equations of motion of asymmetric offshore platforms under three different environmental conditions:seismic action,wave action and their combination are established in this paper. In establishing these motion equations,three typical eccentricity types including mass eccentricity,rigidity eccentricity and their combination were considered,as are eccentricities that occur un-idirectionally and bi-directionally. The effects of the eccentricity type,the dynamic characteristics and the environmental conditions on the torsional coupling response of platforms are investigated and compared. An effort has also been made to analyze the inffluence of accidental eccentricity on asymmetric platforms with different eccentricity in two horizontally orthogonal directions. The results are given in terms of non-dimensional parameters,accounting for the uncoupled torsional to lateral frequency ratio. Numerical results reveal that the eccentricity type has a great inffluence on the torsionally coupled response under different environmental conditions. Therefore,it is necessary to consider the combination of earthquake and wave action in the seismic response analysis of some offshore platforms.     

Atmospheric and Surface Water Pollution Interpretation in the Gdańsk Beltway Impact Range by the Use of Multivariate Analysis

The present study deals with the application of the hierarchical cluster analysis and non‐parametric tests in order to interpret the Gdańsk Beltway impact range. The data set represents concentration values for major inorganic ions (Na⁺, NH, K⁺, Mg²⁺, Ca²⁺, F⁻, Cl⁻, NO, and SO) as well as electrolytic conductivity and pH measured in various water samples [precipitation, throughfall water, road runoff, and surface water (drainage ditches, surface water reservoirs, and spring water)] collected in the vicinity of the beltway. Several similarity groups were discovered both in the objects and in the variables modes according to the water sample. In the majority of cases clear anthropogenic (fertilizers usage and transport, road salting in winter) and semi‐natural (sea salt aerosols, erosion of construction materials) impacts were discovered. Spatial variation was discovered for road runoff samples and samples collected from surface water reservoirs and springs. Surprisingly no clear seasonal variability was discovered for precipitation chemistry, while some evidences for existing of summer and winter specific chemical profile was discovered for road runoff samples. In general, limited range of the Gdańsk Beltway impact was proven.     

Fluvial seed dispersal of riparian trees: transport and depositional processes

Fluvial seed dispersal considers both the transport and deposition of seeds where channel geomorphic structures, hydrology and seed dispersal traits contribute to transport times and depositional locations. This study examines the influence of stream flow patterns on fluvial seed dispersal of buoyant white alder (Alnus rhombifolia) seeds by applying a one‐dimensional transport model. Conceptually, the model separates the stream into two components: (i) the main channel where the seeds are transported downstream; and (ii) the transient storage zone where seeds are temporarily detained or deposited on the river bank. Transport processes are characterized by an advection–dispersion equation which is coupled to a transient storage model using an exponential decay term. The model parameters: longitudinal dispersion (D_L), exchange coefficient (α), main channel area (A) and storage zone (A_s) are estimated based on field experiments conducted in a confined, bedrock‐gravel bed river with pool‐riffle morphology located in coastal northern California. The riparian zone is inhabited by Alnus rhombifolia that disperse buoyant seeds in mid‐spring coinciding with the end of the wet, Mediterranean season. Artificial seeds, with similar traits of buoyancy and density to alder seeds, were used to quantify transport times and depositional locations. Preferential deposition resulted in stream reaches with larger A_s, high A_s/A ratios, and faster exchange coefficients corresponding to divergent stream flow (back‐eddies, re‐circulating flow, flow expansions) caused by geomorphic structures such as the ends of bar/riffle features and bends in the stream. The results demonstrate the importance of transient storage for seed transport and depositional processes. Morphological features that increase a channel's complexity create complex flow structures that detain seeds and provide a greater opportunity for deposition to occur. The model provides a simplification of river hydraulics to represent dispersal dynamics and lends itself to further understanding of hydrochory processes and associated population structure. Copyright © 2015 John Wiley & Sons, Ltd.     

Channel response to an extreme flood and sediment pulse in a mixed bedrock and gravel‐bed river

We exploit a natural experiment caused by an extreme flood (~500 year recurrence interval) and sediment pulse derived from more than 2500 concurrent landslides to explore the influence of valley‐scale geomorphic controls on sediment slug evolution and the impact of sediment pulse passage and slug deposition and dispersion on channel stability and channel form. Sediment slug movement is a crucial process that shapes gravel‐bed rivers and alluvial valleys and is an important mechanism of downstream bed material transport. Further, increased bed material transport rates during slug deposition can trigger channel responses including increases in lateral mobility, channel width, and alluvial bar dominance. Pre‐ and post‐flood LiDAR and aerial photographs bracketing the 2007 flood on the Chehalis River in south‐western Washington State, USA, document the channel response with high spatial and temporal definition. The sediment slug behaved as a Gilbert Wave, with both channel aggradation and sequestration of large volumes of material in floodplains of headwaters' reaches and reaches where confined valleys enter into broad alluvial valleys. Differences between the valley form of two separate sub‐basins impacted by the pulse highlight the important role channel and channel‐floodplain connectivity play in governing downstream movement of sediment slug material. Finally, channel response to the extreme flood and sediment pulse illustrate the connection between bed material transport and channel form. Specifically, the channel widened, lateral channel mobility increased, and the proportion of the active channel covered by bars increased in all reaches in the study area. The response scaled tightly with the relative amount of bed material sediment transport through individual reaches, indicating that the amount of morphological change caused by the flood was conditioned by the simultaneous introduction of a sediment pulse to the channel network. Copyright © 2015 John Wiley & Sons, Ltd.     

Exploring large wood retention and deposition in contrasting river morphologies linking numerical modelling and field observations

Large wood tends to be deposited in specific geomorphic units within rivers. Nevertheless, predicting the spatial distribution of wood deposits once wood enters a river is still difficult because of the inherent complexity of its dynamics. In addition, the lack of long‐term observations or monitored sites has usually resulted in a rather incomplete understanding of the main factors controlling wood deposition under natural conditions. In this study, the deposition of large wood was investigated in the Czarny Dunajec River, Polish Carpathians, by linking numerical modelling and field observations so as to identify the main factors influencing wood retention in rivers. Results show that wood retention capacity is higher in unmanaged multi‐thread channels than in channelized, single‐thread reaches. We also identify preferential sites for wood deposition based on the probability of deposition under different flood scenarios, and observe different deposition patterns depending on the geomorphic configuration of the study reach. In addition, results indicate that wood is not always deposited in the geomorphic units with the highest roughness, except for low‐magnitude floods. We conclude that wood deposition is controlled by flood magnitude and the elevation of flooded surfaces in relation to the low‐flow water surface. In that sense, the elevation at which wood is deposited in rivers will differ between floods of different magnitude. Therefore, together with the morphology, flood magnitude represents the most significant control on wood deposition in mountain rivers wider than the height of riparian trees. Copyright © 2015 John Wiley & Sons, Ltd.     

Challenges to the representation of suspended sediment transfer using a depth‐averaged flux

The sediment saturation recovery process (i.e. the adaptation of suspended sediment concentration [SSC] to local forcing) is the main feature of the non‐equilibrium suspended sediment transport (SST) frequently occurring in fluvial, estuarine and coastal waters. In order to quantitatively describe this phenomenon, a series solution is analytically derived, including the evolution of both vertical SSC profile and near‐bed sediment flux (NBSF), and is verified by net erosion and net deposition experiments, respectively. The results suggest that the sediment saturation recovery process involves vertically varying fluxes that are not represented correctly by depth‐averaging. Consequently, a vertical two‐dimensional (2D) combined scheme is established and applied respectively in to a dredged trench and to a sand wave feature to demonstrate this argument. By analyzing the variations of the calculated depth‐averaged SSC and NBSF we reveal that the equilibrium state presented by the sediment carrying capacity (SCC) form of the NBSF, which is usually applied in depth‐integrated SST models, lags behind the actual dynamic bed equilibrium state. Moreover, the key factor α, the so‐called saturation recovery coefficient within this form, is not only a function of local Rouse number but also is influenced by the local SSC profile. Finally, a three‐dimensional (3D) non‐orthogonal curvilinear body‐fitted SST model is developed and validated in the Yangtze estuary, China, combined with the in situ hourly hydrographic data from August 14–15, 2007 during spring tide in the wet season. Model results confirm that the vertically varying sediment saturation recovery process, the discrepancies between the actual and SCC form of NBSF and non‐constant value of α are significant in actual real geomorphic cases. The quantitative morphological change resulting from variations in environmental conditions may not be correctly represented by uncorrected depth‐integrated SST models if they do not treat the effects of vertical motion on the sediment saturation recovery process. Copyright © 2016 John Wiley & Sons, Ltd.