Study on application of polyenzyme method to offal of Harengula zunasi

The new polyenzyme method for making gravy fromHarengula zunasi offal involves protein enzymolysis with flavorase after proper alkaline and neutral protease levels were established by orthogonal trials to select the best hydrolytic conditions for processing offal with alkaline and neutral protease. The conditions for the polyenzyme method were pH of 7.0, temperature of 50°C, alkaline and neutral protease concentration of 1.5% respectively, hydrolysis time of 120 min, and flavorase concentration of 2.0%, for 60 min. The new gravy-making technology yields a nutritious and delicious gravy containing 40.3% of total essential amino acids, with delicious amino acids Glu, Asp, Gly, Ala, Pro and Ser comprising 49.5%, total and amino nitrogen being respectively 1.9 and 1.1 g/100 g (amino acid nitrogen being 61.0% of total nitrogen), The polyenzyme method was used to make 14.8% protein gravy fromHarengula zunasi offal. In addition, inorganic elements, the phosphorus content is the highest. This project was aided financially by the Guangdong Science and Technology Office (No. 2KM06002S).     

固定化鲅鱼乙酰胆碱酯酶的制备及部分性质测定

酶的固定化是酶传感器制备过程中重要的1个环节.研究采用直接共价法固定鲅鱼乙酰胆碱酯酶（AChE）.制备方法为：0.1g CNBr活化的Sepharose 4B凝胶用1mmol/L的HCl充分溶胀后,与活力为10U的AChE溶液混合,于4℃下150r/min振荡8h.所制备的固定化酶活力回收率较高（96%）,对pH值和温度变化的适应能力均优于非固定化酶;在3个月保存期内,前者的活力损失13%,而后者的活力则下降89%.这说明固定过程能够大大提高AChE的抗逆性和保持酶活力的稳定,有利于酶传感器的制备.     

南海及周边部分地区特提斯构造遗迹:问题与思考

对全球二叠纪－三叠纪古气候特征的研究表明，东特提斯地区晚三叠世古气候标志具有带状分布的特征。北巴拉望地块卡拉棉群岛科龙岛的晚三叠世沉积中发育反映较干燥古气候特征的鲕状灰岩，因此在古气候特征方面，北巴拉望地块晚三叠世地层不能与华南和印支地块同期地层对比，而应该与印度地块北缘喜马拉雅地区（向西）和琉球群岛（向东）对比。根据该古气候分析，北巴拉望地块在晚三叠世时应该位于南部亚热带较干燥气候带内，其晚三叠世的古地理位置比印支地块更靠南。对南海及南海周边部分地特提斯构造遗迹的研究，将有助于深入了解南海北部陆缘区相关构造带的性质及正确恢复南海扩张之前该区的地质发展历史。南海北部陆缘区也是研究解决特提斯构造向东延伸问题以及特提斯构造－太平洋构造时空转化问题的关键地区。     

添加维生素B_（12）生产菌高密度培养褶皱臂尾轮虫的效果

阐述把维生素Ｂ１２生产菌添加到培养水中培养褶皱臂尾轮虫ＢｒａｃｈｉｏｎｕｓＰｌｉｃａｔｉｌｉｓ的买验。共１８株细菌分离于轮虫培养池，其中，有一株产维生素Ｂ１２的假单胞杆菌ＴＰ４对轮虫的生长繁殖有明显的促进作用。把ＴＰ４菌株培养后，加入到２Ｌ的烧杯和５００Ｌ的水槽中培养泰国Ｓ型轮虫时．在９ｄ（天）和６ｄ（天）中，轮虫密度从１２４～１３９和２４２～２８８个体／ｍｌ增殖到４，４１７～５，５４０和１，０１７～１，２５４个体／ｍｌ，分别比对照组增加了４～６及２～３倍。     

Metabolites from mangrove endophytic fungus Dothiorella sp.

Mangroves are special woody plant communities in the intertidal zone of tropical and subtropical coasts. They prove to be a natural microorganisms and new metabolites storage. In the study of mangrove endophytic fungi metabolites, four new compounds, Compounds 1, 2, 3 and 4, as well as a known octaketide, cytosporone B (5), are isolated from an endophytic fungus, Dothiorella sp., HTF3. They all show cytotoxic activities. The elucidation of these structures is mainly based on 1D/2D NMR and ESI-MS spectral analyses.     

华贵栉孔扇贝三倍体的研究

本文报道了用细胞松驰素B、高温和低温休克等方法诱导华贵栉孔扇贝（Chlamys nobilis）三倍体的实验结果。在26.0～28.0℃条件下，选用不同浓度的细胞松驰素B0.1、0.3、0.5、0.7和1.0mg/dm^3，在受精后15min，处理受精卵15min，三倍体诱导率分别为12.5%、37.5%、68.0%、66.6%和81.0%，其中0.5～1.0mg/dm^3浓度的细胞松驰素B对改变倍性最有效。高温休克选用31.0、33.0、35.0和37.0℃处理受精卵，最高三倍体诱导率达46.7%（33.0℃,处理15min）。低温休克选用6.0、8.0、10.0和12.0℃处理受精卵，最高三倍体诱导率为40.7%（10.0℃，处理20min）。实验结果表明，随着处理强度的增大和处理时间的延长，三倍体诱导率增高、但孵化率下降，畸型率上升。用高温休克处理的实验组幼虫生长速度较对照组快。作者认为，在商业性生产中，温度休克是诱导扇贝三倍体的一种简便、有效的方法。文中还就细胞松驰素B与温度休克诱导三倍体的机制进行了讨论。     

CBERS-02B星HR与多光谱影像融合及评价

CBERS-02B星搭载了高分辨率全色相机HR和多光谱传感器CCD,HR影像可以与CCD影像融合,优势互补形成新的影像,既保持HR的高空间分辨率又保持CCD的光谱分辨率,HR影像同样可以与其它传感器影像融合形成新的影像。本文使用6种不同的融合方法融合HR与多光谱CCD以及SPOT5多光谱影像,并对融合结果进行了定性和定量评价,得到了HR与SPOT5多光谱影像融合较好的方法,表明了HR与其它传感器影像融合的潜力,同时也对HR和SPOT5多光谱融合影像及与CCD融合影像进行了初步的对比分析。     

Contributions of boron isotopes to understanding the hydrogeochemistry of the coastal detritic aquifer of Castellón Plain,Spain

The Castellón Plain alluvial aquifer, Spain, is intensively exploited to meet the demand for agricultural irrigation and industrial water supply. The geochemistry of its groundwater shows complex salinization in the northern and southern parts of the aquifer, with significant pollution from human origin in the central portion. Boron content and B isotope geochemistry are useful for distinguishing between various sources of pollution and their relative importance in different parts of this aquifer. Boron concentrations in the groundwater vary between 0.01 and 0.85 mg/L. In the more saline groundwaters, found at the northern and southern ends of the study area, the presence of B is linked to inputs from seawater and water with a calcium-magnesium sulphate facies, which feed the aquifer and clearly influence the chemistry of its waters. Evidence of B adsorption processes in some samples is shown by the low B/Cl ratios and the high values of δ¹¹B. In the central portion of the aquifer, the high B/Cl ratios and the strongly negative δ¹¹B are related to pollution of human origin.     

Recommended Values of 239Pu, 240Pu and 239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.