利用卫星图像研究西藏羌塘及邻区的断裂活动性

利用１／５０万彩色合成镶嵌的卫星图像,对羌塘块体及邻近大约５０万ｋｍ２地区的断裂活动性进行分析判读。根据断裂的影像特征,将所判读的断裂分成全新世活动、晚更新世活动和第四纪早、中期活动３类。结合本世纪以来的地震活动,分析了主要断裂的活动性。例如位于羌塘盆地以北,全新世明显左行走滑的玛尔盖茶卡－若拉错断裂带上,１９９７年１１月８日发生了玛尼７．５级地震,是该断裂带现代活动的表现     

共和7.0级地震前地下流体前兆的动态演化特征

使用40个地下流体观测点的资料,对1990年4月26日青海省共和M_S7.0地震的前兆动态特征进行了系统研究.结果表明:(1)地震带内观测点的水氡趋势异常及水化、水位群体异常及频次异常与断层平均形变速率呈同步变化.地下流体群体异常频次的累加值曲线在地震前表现为指数加速变化图形.(2)震源外围240km范围内的水氡中短期趋势上升异常,表现为由震源逐渐向外围扩散的特点.在短临阶段各测点水氡的异常变化基本同步.(3)流体短临前兆出现明显的起伏加剧和层次现象,突出的表现是流量、断层气日变化在临震阶段出现3次加剧,且异常幅度一次高于一次.     

红河断裂北段土壤中断层气含量变化特征

介绍了作者在滇西地震预报实验场区进行的土壤中断层气研究结果．沿红河断裂带断层气组分Ｈ２,ＣＯ２,Ｈｇ和Ｒｎ含量很高．沿该断裂洱源测线断层气Ｈ２,ＣＯ２和Ｒｎ含量最低,向南Ｈ２,ＣＯ２含量逐渐升高,其中以定西岭测线的Ｈ２,ＣＯ２含量最高．表明在该段断裂活动强烈,而洱源一带断裂活动较弱．     

Tectono–Magmatic Evolution and Metallogenesis along the Northeast Jiangxi Deep Fault, China

Abstract: From the southernmost part of Jiangsu province to the northeastern part of Jiangxi province, China, the Northeast Jiangxi Deep Fault runs for about 400 km length with a width of 30 to 40 km. This fault marks the suture zone of two ter-ranes of Proterozoic age. At the both sides of the fault, Yanshanian granitic activity is recognized. That is, the Dexing-Wuyuan porphyry belt on the NW side of the fault, and the Damaoshan-Lingshan granite belt on the SE side. The former activity is characterized by the occurrence of small stocks of granodioritic composition, rich in siderophile elements but poor in LIL elements. No distinct Eu anomaly is recognized in the REE pattern, and a low initial ⁸⁷Sr/⁸⁶Sr ratio is reported. Magnetite, sphene and apatite are observed as accessory minerals. On the contrary, granitic activity on the SE side of the fault is characterized by the occurrence of composite batholiths, in general of granitic to monzogranitic composition, rich in LIL and alkali elements but poor in siderophile and alkali earth elements. A strong Eu anamaly is recognized in the REE pattern, and initial ⁸⁷Sr/⁸⁶Sr ratios are as high as 0. 716. Fluorite, zircon and REE minerals are observed as accessory minerals. These two contrasting granitic activities are refered to as syntexis– and transformation–types, respectively, following the classification commonly used in China, and have similar petrochemical characteristics to those defined for the magnetite– and ilmenite–series, and I– and S-type granitoids. Considering that the above igneous activity occurred far from the supposed subduction zone along the East Coast of China, intracontinental A-type (continent to continent) subduction is proposed to have occurred northwestwards along the NE Jiangxi Deep Fault during Yanshanian time due to a strong compressional stress from SE to NW. A-type subduction introduced the continental slab to some depth, and resulted in the production of the paired granitic activity observed on both sides of the fault. Many mineral deposits are associated with both granitic belts. In the Dexing-Wuyuan porphyry belt, the Dexing porphyry Cu and Yinshan polymetallic deposits are representative, whereas in the Damaoshan-Lingshan granite belt, several tens of rare metal deposits are known such as the Geyuan Nb–Ta–W–Sn deposits. Metal assemblages of those deposits reflect the source materials of magmas in both granitic belts.     

长治水泥厂区域地震地质环境评价

长治水泥厂位于山西隆起区南部长治盆地, 长治盆地属中强潜在震原区。场地附近晋获断裂现代活动相对较弱, 晚更新后断裂基本停止活动, 对水泥厂场地无直接影响。     

Mineralogy and physical nature of clay gouge

Fault gouges have been observed in the surface outcrops, in shallow excavations, and in deep (300 meters below the surface) tunnels and mines in fault zones. The 2-microns fractions in these fault gouges may compose a few percent to more than fifty percent of the total mass in the outcrops, and the mineralogy of the 2-microns fractions consists of a variety of clays (the common ones are montmorillonite, illite, kaolinite, chlorite, vermiculite and mixed-layer clays) and some quartz, feldspars, etc.Although we cannot yet conclude directly from the studies of gouges that similar gouges exist at depths where many large shallow earthquakes are generated, there is a strong possibility that they do, based on (1) available equilibrium data on various clays — for example, kaolinite has been found to exist at 4 kb and 375°C (±15°C) (Thompson, 1970) and montmorillonite + kaolite has been found to exist at 450°C and 4 kb (Velde, 1969); (2) the compatibility of laboratory velocity data in gouge (Wang et al., 1977) with those in a model for central California (Healy andPeake, 1975); (3) the capability of clays to undergo sudden earthquake-like displacements (Summers andByerlee, 1977); (4) the petrology of intrafault cataclastic rocks in old fault zones (Kasza, 1977); and (5) the compatibility of gouge mineralogy with the mineralogy of hydrothermal clay deposits.If clay gouges are indeed significant components of the fault zone at depth, then the mechanical properties of clays under confining pressures up to 4 kb are important in the behavior of faults. Very few experiments have been performed under such high pressures. But from the physical makeup of clays, we can infer that (1) the range of possible behavior includes stable sliding with vermiculite and montmorillonite (asByerlee andSummers, 1977, have proven) to stick-slip-like behavior with kaolinite, chlorite, etc.; (2) the absence or presence of water will greatly affect the strengths of gouges — it is possible that water may reduce the strength of gouge to a fairly small value.     

THE PALEOSEISMIC SURFACE RUPTURE AT SOUTH OF CENTRAL ALTYN TAGH FAULT AND ITS TECTONIC IMPLICATION

In this study, we described a 14km-long paleoearthquakes surface rupture across the salt flats of western Qaidam Basin, 10km south of the Xorkol segment of the central Altyn Tagh Fault, with satellite images interpretation and field investigation methods. The surface rupture strikes on average about N80°E sub-parallel to the main Altyn Tagh Fault, but is composed of several stepping segments with markedly different strike ranging from 68°N~87°E. The surface rupture is marked by pressure ridges, sub-fault strands, tension-gashes, pull-apart and faulted basins, likely caused by left-lateral strike-slip faulting. More than 30 pressure ridges can be distinguished with various rectangular, elliptical or elongated shapes. Most long axis of the ridges are oblique(90°N~140°E)to, but a few are nearly parallel to the surface rupture strike. The ridge sizes vary also, with heights from 1 to 15m, widths from several to 60m, and lengths from 10 to 100m. The overall size of these pressure ridges is similar to those found along the Altyn Tagh Fault, for instance, south of Pingding Shan or across Xorkol. Right-stepping 0.5~1m-deep gashes or sub-faults, with lengths from a few meters to several hundred meters, are distributed obliquely between ridges at an angle reaching 30°. The sub-faults are characterized with SE or NW facing 0.5~1m-high scarps. Several pull-apart and faulted basins are bounded by faults along the eastern part of the surface rupture. One large pull-apart basins are 6~7m deep and 400m wide. A faulted basin, 80m wide, 500m long and 3m deep, is bounded by 2 left-stepping left-lateral faults and 4 right-stepping normal faults. Two to three m-wide gashes are often seen on pressure ridges, and some ridges are left-laterally faulted and cut into several parts, probably owing to the occurrence of repetitive earthquakes. The OSL dating indicates that the most recent rupture might occur during Holocene.
Southwestwards the rupture trace disappears a few hundred meters north of a south dipping thrust scarp bounding uplifted and folded Plio-Quaternary sediments to the south. Thrust scarps can be followed southwestward for another 12km and suggest a connection with the south Pingding Shan Fault, a left-lateral splay of the main Altyn Tagh Fault. To the northeast the rupture trace progressively veers to the east and is seen cross-cutting the bajada south of Datonggou Nanshan and merging with active thrusts clearly outlined by south facing cumulative scarps across the fans. The geometry of this strike-slip fault trace and the clear young seismic geomorphology typifies the present and tectonically active link between left-lateral strike-slip faulting and thrusting along the eastern termination of the Altyn Tagh Fault, a process responsible for the growth of the Tibetan plateau at its northeastern margin. The discrete relation between thrusting and strike-slip faulting suggests discontinuous transfer of strain from strike-slip faulting to thrusting and thus stepwise northeastward slip-rate decrease along the Altyn Tagh Fault after each strike-slip/thrust junction.     

STUDY ON PALEOEARTHQUAKES ALONG THE JINGHE SECTION OF BOLOKENU-AQIKEKUDUKE FAULT

The Bolokenu-Aqikekuduk fault zone(B-A Fault)is a 1 000km long right-lateral strike-slip active fault in the Tianshan Mountains. Its late Quaternary activity characteristics are helpful to understand the role of active strike-slip faults in regional compressional strain distribution and orogenic processes in the continental compression environment, as well as seismic hazard assessment. In this paper, research on the paleoearthquakes is carried out by remote sensing image interpretation, field investigation, trench excavation and Quaternary dating in the Jinghe section of B-A Fault. In this paper, two trenches were excavated on in the pluvial fans of Fan2b in the bulge and Fan3a in the fault scarp. The markers such as different strata, cracks and colluvial wedges in the trenches are identified and the age of sedimentation is determined by means of OSL dating for different strata. Four most recent paleoearthquakes on the B-A Fault are revealed in trench TC1 and three most recent paleoearthquakes are revealed in trench TC2. Only the latest event was constrained by the OSL age among the three events revealed in the trench TC2. Therefore, when establishing the recurrence of the paleoearthquakes, we mainly rely on the paleoearthquake events in trench TC1, which are labeled E1-E4 from oldest to youngest, and their dates are constrained to the following time ranges: E1(19.4±2.5)~(19.0±2.5)ka BP, E2(18.6±1.4)~(17.3±1.4)ka BP, E3(12.2±1.2)~(6.6±0.8)ka BP, and E4 6.9~6.2ka BP, respectively. The earthquake recurrence intervals are(1.2±0.5)ka, (8.7±3.0)ka and(2.8±3)ka, respectively. According to the sedimentation rate of the stratum, it can be judged that there is a sedimentary discontinuity between the paleoearthquakes E2 and E3, and the paleoearthquake events between E2 and E3 may not be recorded by the stratum. Ignoring the sedimentary discontinuous strata and the earthquakes occurring during the sedimentary discontinuity, the earthquake recurrence interval of the Jinghe section of B-A Fault is ~1~3ka. This is consistent with the earthquake recurrence interval(~2ka)calculated from the slip rate and the minimum displacement. The elapsed time of the latest paleoearthquake recorded in the trench is ~6.9~6.2ka BP. The magnitude of the latest event defined by the single event displacement on the fault is ~M_W7.4, and a longer earthquake elapsed time indicates the higher seismic risk of the B-A Fault.     

Country‐rock structural fabrics as a guide to pluton emplacement depth: An example from the Hodgkinson Province,northeastern Australia

Country‐rock structures adjacent to plutons of the linear, northwest‐southeast‐trending Mt Alto Supersuite, Hodgkinson Province, northeastern Australia, are variably developed from north to south along the belt. S₃ and S₄ cleavages show close temporal relationships with pluton emplacement and are better and more widely developed around plutons in the north, whereas much weaker cleavages of the same generation are only sporadically developed to the south. Cleavage trend lines anastomose around less elongate plutons to the north but are generally truncated by more elongate plutons to the south. It is proposed that a major crustal dislocation, the Alto Fault Zone, comprises a set of subparallel structures that formed prior to granite intrusion and controlled emplacement of some plutons and their final shapes. The north‐south variation in structural relations is interpreted to reflect a corresponding variation in depth of emplacement from north to south, which resulted when post‐emplacement reactivation of the Alto Fault Zone uplifted and sinistrally displaced the northern end of the supersuite relative to the southern end. Reactivation of the fault zone after granite emplacement is supported by the truncation of some plutons.     

Prerift and synrift sedimentation during early fault segmentation of a Tertiary carbonate platform, Indonesia

Eocene carbonate deposits of the Barru area, Sulawesi, Indonesia, provide a rare insight into sedimentation prior to and during propagation of normal faults to the surface. Three main successions; late prerift, latest prerift/earliest synrift and synrift, are characterised by distinctive facies associations and sequence development. Shallow water foraminiferal shoals and intervening lower energy depositional environments occurred during the late prerift in areas which latter formed footwall highs and hangingwall depocentres, respectively. During the latest prerift/earliest synrift, shallow water shelves deepened laterally into slope environments in developing hangingwall depocentres. In both these sequences, sections in developing hangingwall areas are thickest, deepen up-section and thin laterally towards growing footwall highs. Active faulting resulted in rapid drowning of hangingwall depocentres and massive reworking of material derived from collapse of the platform margin and adjacent shallow water/emergent footwall highs.Differential subsidence, controlling water depths and accommodation space, types of carbonate producers and active faulting were the main factors affecting depositional environments and facies distributions. Carbonate producers are extremely sensitive indicators of depositional water depth and energy, hence rapid lateral and vertical facies variations in the Barru area provide quantifiable insight into environmental changes prior to and during active faulting.