西部大开发与中国经济发展

在对中国西部的区域划分进行界定并阐述中国西部区域特征的基础上,对中国西部的开发进行了历史回顾,并对中国西部开发的历史背景和现实基础、中国西部开发的优势和制约条件进行分析,最后提出了中国西部开发的发展战略和政策措施.     

发射分机在线自检中主从式多单片机串行通讯系统的设计

本文介绍了多波束海底地形测绘声呐中，用于发射分机在线自检的主从式多机串行通讯系统的设计方案然不打扰主控机运行的条件下，作为主控机协处理器的单片机和负责发射分机在线自检的单片机间通过串通讯将自检信息传送到主机和主控机的共享ＲＡＭ中，以使主控机对这些信息进行提取，判断等处理操作，从而实现从对发射分机的监控功能。     

地震折射波的虚拟射线理论及其应用

本文提出了一种地震折射液的虚拟射线理论,根据该理论,只要已知地表层的速度,即可直接由折射波信息提取地震参数,从而可实现折射界面的反演。 文中通过实际介质模型的计算机实验结果,验证了该理论的正确性。     

胶州湾环流和污染扩散数值模拟Ⅳ胶州湾变边界模型

胶州湾的潮滩面积约占高潮水域面积的三分之一．因而模拟包括潮滩在内的潮汐运动过程将能更好地重现这一实际的物理现象。为此．本文采用变动边界模型处理潮滩区域．并得到优于固定边界模型的计算结果。     

F／Z：F／F＋M=F／Z＋MF表达什么生物学概念

《D/F=F/F M=F/Z MF表达什么生物学概念?》的作者，针对《捕捞对世代数量的影响》一文的第一部分提出了不同的意见，争论的焦点是Bevertou—Holt模式中的“捕获尾数在死亡尾数中所占的比例”问题。后者用数学推导方法证明这一比例等于F／F M；     

Poisson-Logistic二元复合极值模型在平台甲板标高设计中的应用

考虑到平台所在海区台风出现的频次及其诱发之风、浪、潮、流极端海况联合出现的概率特性，本文推导出Poisson—Logistic二元复合极值模式，并以平台甲板标高进行实例计算。新模式增加了概率模型的物理内涵，解决了Logistic模型阈值选取的任意性。对海洋工程极端海况荷载组合预测具有广泛的应用前景。     

海洋综合测量声学系统间信号干扰的分析

针对海洋综合测量多种声学测量系统间的窄带相干声学干扰现象进行了理论分析，并针对克服窄带干扰提出了一些具有实用价值的建议。     

中国开辟区不利开采地形类型及其分布

利用1998年"大洋一号"调查船近海底作业所获的深拖海底电视和照相系统资料,对中国开辟区不利开采地形类型及其分布特征进行了研究,并对海底地形的坡度进行了计算,结果表明:(1)中国开辟区东、西两区海底的东向坡和西向坡是均衡分布的。东、西两区海底地形坡度的分布特征明显不同,东区海底地形坡度以0～15°为主,而西区坡度大于3°的地形则很少。坡度大于5°的地形主要分布于坡脚处,特别是坡度超过15°的地形总是出现在水深变化的转折点处。(2)研究区不利开采地形可分为坡度为5～15°和大于15°两种类型,东区地形坡度大于5°的不利开采地形比西区多14%,东区坡度大于15°的地形为3.6%,比西区(仅为1.4%)多,东、西两区都有少量坡度近90°的地形出现,并且这种地形在东区所占比率比西区大,说明东区断崖、陡坎和断裂沟槽比西区多,地形也更为复杂多变。     

多波束数据的海底数字地形模型构建

提出大批量多格式原始多波束数据的DTM构建方法，以满足大区域、大比例尺海底地形制图的需要。在多种格式原始多波束数据接口和系统内部标准数据结构的基础上，通过对数据文件、数据种类和数据运算量的有效组织管理，实施边读入、边权重配赋的网格插值，分析了高斯、指数和距离平方反比权重函数的适用性，及最小值、最大值和平均值的实用性。在权重配赋网格插值基础上，提出分形fBM和张力样条配合使用的方程式插值方法，保证DTM数据的有效外延和地形分辨。整套算法效率高，并能有效保证DTM的精度，对存储在外部介质的数据遍历一次即可完成网格插值。     

Photoinduced toxicity single and binary mixtures of four polycyclic aromatic hydrocarbons to the marine diatom Skeletonema costatum

Diatom Skeletonema costatum Cleve is one of the main predominant phytoplankton species in the Changjiang Estuary in China. In order to provide some basic information for future assessment of the potential risk on phytoplankton communities in this estuary caused by polycyclic aromatic hydrocarbons(PAHs), this alga was selected as a representative to investigate the photoinduced toxicity of PAHs, in single and mixture. Four PAHs including three-ring phenanthrene and anthracene, four-ring fluoranthene and pyrene were tested in the laboratory. The single toxicity of each PAH on this microalga was compared with and without the simulated solar UV radiation. The results showed that this microalga was sensitive to PAH's photoinduced toxicity. Ratios of the 72 h median effect concentration obtained for fluorescent and UV light tests were about 8.4 for phenanthrene, 13.0 for anthracene, 6.5 for fluoranthene, and 5.7 for pyrene, indicating that UV light enhanced the PAH toxicity to this alga significantly. Under the fluorescent radiation (lacking UV), the dose-response curves based on chemical concentrations revealed that the order of toxic strength was fluoranthene greater than pyrene greater than anthracene greater than phenanthrene; while under the UV radiation (476 μW/cm2 for UVA, 6.5 μW/cm2 for UVB) it became fluoranthene approximately equaling anthracene greater than pyrene greater than phenanthrene, indicating that the UV light also changed its relative toxicity to this alga. The photoinduced toxicity of PAHs to the marine diatom S. costatum might be a synergistic effect of photosensitization reactions (e.g., generation of single-state oxygen) and photomodification (photooxidation and/or photolysis).The combined effects of six binary mixtures on the marine diatom S. costatum were investigated using the additive-index method. Four binary-mixtures (phenanthrene plus anthracene; phenanthrene plus pyrene; anthracene plus fluoranthene; anthracene plus pyrene) were found to be synergistic joint action mode, while two binary-mixtures (phenanthrene plus fluoranthene; fluoranthene plus pyrene) displayed antagonist, revealing a complex pattern of possible interactions. The combined action mode of PAHs might be related to various factors such as the mixture compounds, mixture ratios and test conditions, etc.