岩溶区集中式饮用水源地水质评价与保护——以毕节市倒天河水库和利民水库为例

采用SPSS软件，对2003年01月至2004年12月期间，倒天河水库和利民水库逐月水质监测数据进行数理统计分析，结果表明毕节市饮用水水质污染有较明显的季节变化和空间差异；且不同污染物对水体污染的贡献率各不相同，总磷和粪大肠菌群所占份额最大，方差累积贡献率达77％。在此基础上，利用加权综合污染指数对水体水质污染现状进行综合评价，结果显示倒天河水库和利民水库，水质污染总体较轻．饮用水水质符合《地表水环境质量标准（GB3838—2002）》中Ⅲ类水质标准；最后提出加大水环境保护的建议。     

论四川盆地三叠系地下水水文地质条件

四川盆地三叠系地下水可划分出碎屑岩孔隙裂隙和碳酸盐岩岩溶裂隙两大储集类型。按此处构造开启程度和埋深条件等的不同,下中三叠统地下水有沉积变质水和渗入淋滤水两种基本成因类型,水动力特征各异。沉积变质水处于深埋封闭条件,受地静压力驱动控制;渗入淋滤水分布于背斜露头区和浅部地区,受静水压力驱动控制。并由此控制了盆地三叠系盐类的保存条件。     

陕西省水工程勘察规划研究院

陕西省水工程勘察规划研究院始建于一九四九年。长期以来承担着全省地下水监测研究、地下水盗源调查评价、地下水开发利用规划、钻井技术设备研究、科技推广等专业按术工作和机井工程建设监督、质量管理，钻井施工资质管理等行业技术管理工作。具有国家甲级水文水资源调查评价、建设项目水资源论证、水文地质勘察、岩土工程资质．     

Analysis on the sources of mercury in soils in the Chengdu Basin, China

Mercury is a pollutant of concern due to its toxic and bioaccumulative properties. Studies on the distribution and hazard of mercury in the environment are mainly focused on its forms, toxicity and the environment standard, and progresses and results have been achieved. But these studies in the past were concentrated on the scales of laboratory or smaller districts merely, such as a small unit of mineral area, vegetable base, paddy field, lake, etc. Multi-target regional geochemical survey carried out by China Geological Survey from the 1990s to now is a fundamental and commonweal geological survey, large-scale and systematical inquisition and research were conducted in 19 provinces （or municipalities directly under the Central Government） in the eastern overlay region of China, and the purpose is to provide the basic geochemical data for national economic construction, adjustment of industrial and agricultural structures and sustainable social development. Geochemical studies aim at investigating soils in these regions and 52 elements have been tested, producing a great amount of data at the same time. Methods： based on the data from 3061 samples of surface soil and 832 samples of deep soil from the project of multi-purpose geochemical survey in the Chengdu Basin, Sichuan, China, this paper describes the correlation relationship between Hg and other 48 elements and their spatial distribution in surface and deep soils of these areas by applying the method of linear regression and factor analysis.     

Mobility of heavy metals from tailings to stream waters in local zinc smelting activities contaminated site

It has been found that stream waters were severely contaminated with wastes from a long-time smelting factory in Hezhang, Guizhou, China. The main sources of contamination are the smelting wastes stored in the open air and abandoned in the vicinity of stream. A method of lead isotope was adopted in order to identify relations between tailings and water contamination. Representative samples of tailings and stream sediments were collected. Mineralogical characterizations were conducted using XRD and TEM/SEM, while acid digestion was carried out for determining metal contents. BCR sequential leaching tests were performed in order to assess metal mobility. The tremendous ‘actual＇ and ‘potential＇ mobility of heavy metals indicates that the smelting waste and stream sediments present a considerable threat to the environment. Besides the chemical remobilization of heavy metals from the sediments and the reworking of riverbed sediments act as a secondary source of pollution. Also groundwater and stream water were sampled in specific locations and were measured.     

Geochemistry of porewater and sulfate-reducing bacteria in sediment cores from the Chianan Plain, Taiwan

High concentrations of arsenic and humic substances in groundwater from the southwestern coastal plain of Taiwan were well known for their probable relationships with black-foot disease. In order to realize the relationships between the concentrations of humic substances and arsenic in this area, 24 well water samples were analyzed. After filtered through 0.45 μm glass fiber membrane in the field, samples were kept in the dark at 4℃ and then separated into six fractions with varying range of molecular weight （〈0.5, 0.5-1, 1-5, 5-10, 10-50 and 〉50 k Da） by ultrafiltration apparatus （Molecular/Por Stirred Cell system） in the lab. Concentrations of humic substances were measured by fluorescence spectrometer （HITACHI F-2000, ex=370, em=445） and arsenic by FIAS-AA （Perkin Elmer AAnalyst 100, FIAS-400）. On average, only 6.2% of the total arsenic in water existed in the fraction of 〉0.5 k Da. and the others were complexed with humic substances （including humic acid and fulvic acid）. The results demonstrated a distinct positive correlation between the concentrations of humic substances and arsenic.     

Possibility of degradation of phenylarsonic acid in the presence of ferrihydrite

Although inorganic species are predominant in natural systems, but there are many kinds of organoarsenic species such as methylated and phenylated arsenic compounds. Phenylarsonic acid （PA） is a degradation product of organoarsenics used for chemical warfare agents, which has been detected in well water at the disposal site of the agents in Japan. There are few reports studying behavior of PA in soil. In this study, PA was adsorbed onto ferrihydrite and its chemical forms were determined using high performance liquid chromatography connected to inductivity-coupled plasma mass spectrometry （HPLC-ICP-MS）. 100 mg/kg of PA was mixed with 0.03 g of 2-line ferrihydrite. For each suspension, pH was adjusted by HNO3 or NaOH. Each sample was incubated for more than 19 hours and the final pH was measured. After filtration, the chemical form of arsenic in the filtrate was measured using HPLC-ICP-MS. In addition, ferrihydrite separated by filtration was dissolved by 3 ml of 0.5 M HCI and the arsenic species in the solution was detected by HPLC-ICP-MS （column： Tosoh TSKgel SuperlC-AP, eluent： 0.01 M HNO3）. It was verified that PA is not degraded by heating in 0.5 M HCl solution. At pH 3.1, any arsenic compounds were not detected from the solution, because almost all arsenic species were adsorbed onto ferrihydrite at lower pH. At pH= 12, however, 7%-10% of inorganic arsenic was detected in the solution. In solid phase, there are some problems to determine the precise ratio of inorganic and organic species. When the solution includes Fe ion at 0.01 M level, the retention time of arsenic species drifted compared to those in standard solution, which makes it difficult to determine precisely the arsenic species adsorbed on ferrihydrite. Therefore, more study is needed to determine the ratio of inorganic and organic species in the system.     

Treatment of high fluoride concentration wastewater by layered double hydroxides： Mechanism studies

An appropriate concentration of fluoride in drinking water is required to prevent dental cavities, but long-term ingestion of water that contains more than a suitable level of fluoride can cause bone disease and mottling of the teeth. Fluoride ions can be found in wastewater from the fluoride chemical industry, as well as the semiconductor, metal processing, fertilizer, and glass-manufacturing industries. The discharge standard for fluoride in industrial wastewater in China is 10 mg/L. Efficient treatment of fluoride-containing wastewater is therefore of major concern in China, following the rapid development of the fluoride chemical industry. Several methods have been used to remove fluoride from water, such as adsorption, chemical precipitation, electrodialysis, ion exchange and electrochemical processes. Layered double hydroxides （LDHs） are anionic clays with high anion exchange capacities which are effective adsorbents for removal of a variety of anionic pollutants. LDHs have been studied as potential adsorbents for removing toxic anionic species such as CrO4^2-, TcO4^-, SeO3^2-, pesticides, and anionic surfactants from aqueous systems. One of the main attractions of using LDHs for fluoride removal, is that unlike other chemical treatment methods, no chemical sludge should be produced. In the present study, an attempt was made to investigate the mechanism of fluoride removal by LDHs under different conditions using batch methods. In addition, the release of fluoride adsorbed on LDHs by treatment with an aqueous solution of Na2CO3 was studied. The residual fluoride was found to be 10 mg/L in a solution with an initial concentration of 1000 mg/L, which meets the discharge standard for fluoride in industrial wastewater in China.     

High resolution profiles of trace metals in pore waters of marine and riverine sediments assessed by DET and DGT

In polluted aquatic systems, toxic metals are often accumulated in bottom sediments. They are, however, not necessarily stored definitively because diagenetic processs can modify redox, pH and even the amount of complexing ligands, releasing the trace metals back into the pore waters and the water column. Especially the labile metal fraction in the pore waters is important since this is the bioavailable fraction determining the bio-toxicity of the sediments. The goal of our study was therefore to assess, with novel sampling techniques, this bioavailable metal fraction in the pore waters as well as the flux towards the overlying water column. High-resolution profiles of trace metals in pore waters of marine and riverine sediments were assessed by DET （diffusive equilibrium in thin films） and DGT （diffusive gradients in thin films） gel techniques. The DET technique uses a diffusive gel layer that equilibrates with the aquatic system and with this technique the concentrations of total dissolved trace metals are obtained directly. The DGT technique uses an acrylamide diffusive gel backed by a resin gel （Chelex） which binds trace metals. With the DGT technique only labile species of selected metals can be captured. According to the redox potential measurements, the marine sediments were suboxic （200 mV to -220 mV versus Ag/AgCl electrode）, while the riverine sediments were completely anoxic （-160 mV to -220 mV versus Ag/AgCl electrode）. This redox potential was apparently controlling the trace metals species in the pore waters： for example a strong correlation between Mn and Co was found in the riverine sediments （for DET and DGT sampling）, while in the marine sediments trace metals presented various behaviors.