南海东北部陆架边缘第四纪高分辨率层序地层和沉积体系演化及其控制因素

The northeastern shelf margin of the South China Sea(SCS) is characterized by the development of large scale foresets complexes since Quaternary. Based on integral analysis of the seismic, well logging and paleontological data, successions since ～3.0 Ma can be defined as one composite sequence, consist of a set of regional transgressive to regressive sequences. They can be further divided into six 3 rd order sequences(SQ0–SQ5) based on the Exxon sequence stratigraphic model. Since ～1.6 Ma, five sets of deltaic systems characterized by development of wedge-shaped foresets complexes or clinoforms had been identified. High-resolution seismic data and the thick foresets allowed further divided of sub-depositional sequences(4 th order) of regression to transgression, which is basically consistent with published stacked benthic foram O-isotope records. Depositional systems identified in the study area include deltaic deposits(inner-shelf deltas and shelf-edge deltas), incised valleys, and slope slumping massive deposits. Since ～1.6 Ma, clinoforms prograded from the southern Panyu Lower Uplift toward the northern Baiyun Depression, shelf slope break migrated seaward, whereas the shelf edge of SQ0 migrated landward. The development of incised valleys in the continental shelf increased upward,especially intensive on the SB3 and SB2. The slumping massive deposits increased abruptly since SB2, which corresponds to the development of incised valleys. The evolution of depositional systems of continental slope mainly controlled by the combined influence of sea level changes, tectonic movements, sediment supply and climate changes. Since ～3.0 Ma, relative sea level of the northern SCS had been experienced transgression(～3.0 Ma BP) to regression(～1.6 Ma BP). The regional regression and maximum transgressions of the composite sequences were apparently enhanced by uplift or subsidence related to tectono-thermal events. In addition,climatic variations including monsoon intensification and the mid-Pleistocene transition may have enhanced sediment supply by increasing erosion rate and have an indispensable influence on the development of the incised valleys and 5 sets of deltaic systems since ～1.6 Ma.     

碎冰条件下单点系泊船舶动态响应特性研究

为了研究不同单点系泊位置对极地系泊船舶在来冰角度改变时动态响应的影响,运用离散元方法(DEM),计算了船舶在60%密集度下,冰速为1.0 m/s、冰厚为1 m时不同角度的船冰阻力,结合系泊分析软件二次开发功能,计算分析系泊船舶在不同来冰角度和不同系泊位置下受上述冰情影响下的响应。通过对模拟结果与试验结果的对比,认为离散元方法(DEM)的数值模拟结果与试验结果吻合较好;单点系泊位置为距船头L/4时,系泊船舶能以最快速、最稳定的方式对来冰方向的变化做出响应。     

Multifractal filtering method for extraction of ocean from remotely sensed imagery

Traditional methods of extracting the ocean wave eddy information from remotely sensed imagery mainly use the edge detection technology such as Canny and Hough operators. However, due to the complexities of ocean eddies and image itself, it is sometimes difficult to successfully detect ocean eddies using these methods. A mnltifractal filtering technology is proposed for extraction of ocean eddies and demonstrated using NASA MODIS, SeaWiFS and NOAA satellite data set in the typical area, such as ocean west boundary current. Results showed that the new method has a superior performance over the traditional methods.     

一种优化模糊度搜索方法的研究

对于高精度测量和导航,GPS载波相位整周模糊度的快速求解仍然是一个难点,尤其对于单频接收机。提出一种快速求解整周模糊度的方法,其基本思想采用分步求解,首先应用最小二乘模糊去耦调节法(LAMBDA)搜索出来的模糊度作为初始值,然后应用卫星分组方法降低搜索维数,并应用极大似然准则,构造搜索函数,最后应用最优化原理,搜索出最优的模糊度参数,并从三个方面对其进行检验,即RATIO检验,OVT检验,多项式拟合残差检验。为验证该算法,我们用单频GPS接收机进行了实验,利用本文方法在11 S以内正确确定了模糊度,其基线长误差小于3MM,表明该方法不但可以改进模糊度的搜索速度,而且可以进一步提高其可靠性和成功率。该方法可广泛应用于定向及姿态测量。     

复合加载模式作用下地基承载性能数值分析

确定竖向荷载(V)、水平荷载(H)和力矩(M)共同作用下建筑物地基的破坏模式及在荷载空间(H,V,M)中的破坏包络面是地基设计中的关键问题。为提高Swipe试验方法计算精度,提出了改进方案,进而利用有限元方法分析了复合加载模式作用下均质粘性土地基上条形基础的破坏包络面。计算表明,基于改进Swipe试验方法的数值模拟结果明显好于常规Swipe试验方法。针对海洋工程中实际复合加载模式的特点,探讨了竖向荷载分量V对地基破坏模式和H-M荷载平面上的破坏包络线的影响,结果表明竖向荷载分量显著地改变了地基的破坏模式及包络线的形状。     

以顾客为关注焦点,创中心品牌服务

IS09000标准八项质量管理原则的内容是：以顾客为关注焦点;领导作用,全员参与;过程方法;管理的系统方法;持续改进;基于事实的决策方法,与供方互利的关系。其中“以顾客为关注焦点”放在了质量管理八大原则的首位,并且贯穿于标准的始终。标准对这一原则所作的描述是“组织依存于顾客,因此组织应理解顾客当前和未来的需求,满足顾客要求并争取超越顾客期望”。     

谢帕德和福克碎屑沉积物分类方法在南黄海表层沉积物编图中的应用与比较

谢帕德(Shepard,1954)和福克(Folk)等(1970)的沉积物结构分类是较为常用的两种分类方法。尽管都是基于沉积物粒度组成的三元分类,但分类的出发点和基本思路有很大的不同。Shepard分类是三端元等价的纯描述性分类,不反映沉积物粒度组成的水动力学属性,砾质沉积物未考虑在内。Folk分类虽然也是三端元分类,但三个端元是不等价,首先按砂/泥比划分基本类型,然后再按粉砂/黏土比进一步分类,砂/泥比反映动力强度的大小,粉砂/黏土比反映介质的混浊度,具有明显的动力学意义。鉴于粒度分异与搬运距离的成因联系,Folk分类也是分析物源区的工具。笔者用两种分类研究了南黄海的表层沉积物,发现按照Folk分类,南黄海的表层沉积物分布可以分为两个沉积系列。在南黄海西部,沉积物由西向东依次为砂-粉砂质砂-砂质粉砂-粉砂;而在东部,由东向西依次为砂-泥质砂-砂质泥-泥组成。由岸及海随着沉积水动力由强变弱,沉积物粒度变细,大致与由东西两侧的强潮流作用区到中部的静水涡流作用区的动力学格局相一致,在一定程度上反映了沉积环境的变化、沉积物的物源和输运方向。实践证明,Folk分类的应用效果明显优于Shepard分类,可以较好地满足海洋地质研究的需要,应当在我国海洋沉积物的研究中予以推广。     

引水工程复杂水流的二、三维嵌套数值模拟

建立宽浅河道与管道水流的二、三维嵌套的数学模型,对基本的控制方程、方程的数值离散格式和求解方法、嵌套连接和初始边界条件等问题进行研究.利用上述方法对某工程实例进行计算,在宽广水域上给出了水力要素的平面分布,在复杂边界强三维流动的计算区域得到其三维运动特性.计算结果与实验资料进行了比较,两者吻合较好,说明嵌套连接的二、三维数学模型是解决某些实际工程问题的一种可靠的和有效的工具.     

东海北部外陆架MIS 6以来的沉积地层格架及古环境演化

利用最新采集的高分辨率浅地层剖面资料,结合SHD-1钻孔岩心资料,对东海北部外陆架MIS 6以来的地层结构进行了分析,建立了MIS 6以来的沉积地层格架,并对地层的地质年代进行了厘定。根据Octavian Catuneanu（2005）的层序地层学理论,研究区地层划分出海侵和高位体系域、下降期体系域、海退和低位体系域。研究表明,过孔的浅地层剖面与钻孔岩心的沉积地层有很好的对应关系。东海北部外陆架MIS 6以来可划分出7个不整合界面（D7—D1）和7个地震单元（SU7—SU1）。东海外陆架的海进层序与海退层序有规律地交替发育,它们与海平面变化曲线也有很好的对应关系。其中,地震单元SU1、SU5分别为MIS 1、MIS 5形成的海侵沉积,主要发育浅海沉积层,100 m以浅的位置发育潮流沙脊;地震单元SU2、SU4、SU6分别对应 MIS 2、MIS 4和MIS 6低海平面时期形成的河流/河口—三角洲沉积;地震单元SU3、SU4为下降期体系域,这两个亚单元分别对应MIS 3和MIS 4晚期。MIS 4—MIS 3发育厚层且分布广泛的水下三角洲,但MIS 4发育的水下三角洲的规模不及MIS 3大。总之,对MIS 6以来沉积地层格架的建立和古环境研究可为东海外陆架晚第四纪地层的海平面变化、古环境演化等相关研究提供参考。     

利用限制性最大似然方法和贝叶斯方法估计大菱鲆生长性状的遗传参数。

Bayesian and restricted maximum likelihood(REML) approaches were used to estimate the genetic parameters in a cultured turbot Scophthalmus maximus stock. The data set consisted of harvest body weight from 2 462progenies(17 months old) from 28 families that were produced through artificial insemination using 39 parent fish. An animal model was applied to partition each weight value into a fixed effect, an additive genetic effect, and a residual effect. The average body weight of each family, which was measured at 110 days post-hatching, was considered as a covariate. For Bayesian analysis, heritability and breeding values were estimated using both the posterior mean and mode from the joint posterior conditional distribution. The results revealed that for additive genetic variance, the posterior mean estimate( δ_a~2=9 320) was highest but with the smallest residual variance,REML estimates( δ_a~2=8 088) came second and the posterior mode estimate( δ_a~2=7 849) was lowest. The corresponding three heritability estimates followed the same trend as additive genetic variance and they were all high. The Pearson correlations between each pair of the three estimates of breeding values were all high,particularly that between the posterior mean and REML estimates(0.996 9). These results reveal that the differences between Bayesian and REML methods in terms of estimation of heritability and breeding values were small. This study provides another feasible method of genetic parameter estimation in selective breeding programs of turbot.