微波消解-电感耦合等离子体质谱法测定土壤中稀土元素条件优化

稀土元素因其用途广泛,已经得到了越来越多的关注,被应用于各个行业.研究表明,稀土元素对作物的光合作用、产量、抗逆、品质、发育和养分吸收等具有重要作用.作物中的稀土元素主要来自对土壤中稀土元素的吸收,因此,有效分解并快速测定土壤中的稀土元素,可以合理指导稀土元素的施用,对作物的生长和土壤的营养状况具有重要作用.本文比较了...     

一种夏季强雷雨预报因子的选取方法

为了提高对武汉天河机场夏季强雷雨天气预报准确率,利用极值剔除法选取了5个预报因子;这些因子分别与中低层大气和地面的温度、湿度等要素有关。将预报结论与天气实况进行对比后发现:极值剔除法所得的预报因子可以有效地减少夏季强雷雨的漏报率。     

融合光度参数估计的单目直接法视觉里程计

针对单目直接法视觉里程计在光照变化大的场景下定位精度低、定位鲁棒性差的问题,文中提出一种融合光度参数估计的单目直接法视觉里程计.首先通过对图像帧进行特征匹配实现特征跟踪,建立起图像像素点之间的关联,接着利用非线性优化方法进行光度参数估计,然后在光度参数估计提供的光度参数先验信息的基础上对图像灰度值进行校正,最后利用校正...     

模拟地震波传播的三维逐元并行谱元法

高效地震波场正演模拟对于复杂模型中地震波传播与成像研究至关重要.本文在谱元法原理框架内,对已有逐元谱元法改进,提出一种新的逐元并行谱元法求解三维地震波运动方程,并得到地震波场.逐元并行谱元法的核心思想在于在单元上进行质量矩阵与解向量的乘积运算,并将此运算平均分配至每一个CPU计算核心,此处理有利提升谱元法的并行计算效率...     

基于地心坐标系的卫星导航测风平滑算法

本文从高空风探测原理出发,提出可业务化运行的卫星导航探空系统高空风平滑计算方法。该算法首先根据北斗〖CD*2〗GPS（Global Positioning System）双模式探空仪提供的大地坐标秒间隔数据,基于地心坐标系计算原始高空风;然后,采用矢量滑动平均法对原始数据进行平滑处理。通过与同球施放的芬兰RS92探空系统做比对分析得出,滑动平均窗口在0～32 km高度范围内设置为34 s、在32 km高度以上设置为60 s条件下,卫星导航探空系统与RS92探空系统高空风测量结果吻合较好。该算法计算结果同基于站心坐标系计算的30 s滑动平均风基本相同,但其风速分量误差范围在32 km高度以下略优、在32 km高度以上减小明显,升空全程误差范围更为稳定。     

An analytical solution for describing the transient temperature distribution in an aquifer thermal energy storage system

A mathematical model is developed for predicting the temperature distribution in an aquifer thermal energy storage (ATES) system, which consists of a confined aquifer bounded from above and below by the rocks of different geological properties. The main transfer processes of heat include the conduction and advection in the aquifer and the conduction in the rocks. The semi‐analytical solution in dimensionless form for the model is developed by Laplace transforms and its corresponding time‐domain solution is evaluated by the modified Crump method. Field geothermal property data are used to simulate the temperature distribution in an ATES system. The results show that the heat transfer in the aquifer is fast and has a vast effect on the vicinity of the wellbore. However, the aquifer temperature decreases with increasing radial and vertical distances. The temperature in the aquifer may be overestimated when ignoring the effect of thermal conductivity. The temperature distribution in an ATES system depends on the vertical thermal conduction in the rocks and the horizontal advection and thermal conduction in the aquifer. The present solution is useful in designing and simulating the heat injection facility in the ATES systems. Copyright © 2010 John Wiley & Sons, Ltd.     

A coupled discrete element model for the simulation of soil and water flow through an orifice

Soil erosion around defective underground pipes can cause ground collapses and sinkholes in urban areas. Most of these soil erosion events are caused by fluidization of the surrounding soil with subsequent washing into defective sewer pipes. In this study, this soil erosion process is simplified as the gradual washout of sand particles mixed with water through an orifice. The discrete element method is used to simulate the large deformation behavior of the sand particles, and the Darcy fluid model is coupled with this approach to simulate fluid flow through porous sand media. A coupled 3D discrete element model is developed and implemented based on this scheme. To simulate previous experiments using this coupled model considering the current computing capacity, we incorporated a ‘supply layer’ to study the continuous erosion process. The coupled model can predict the erosion flow rates of sand and water and the shape of erosion void. Thus, the model can be used as an effective and efficient tool to investigate the soil erosion process around defective pipes. Copyright © 2017 John Wiley & Sons, Ltd.     

An approach to the modeling of viscoelastic damage. Application to the long‐term creep of gypsum rock materials

A three‐dimensional phenomenological model is developed to describe the long‐term creep of gypsum rock materials. The approach is based on the framework of continuum damage mechanics where coupling with viscoelasticity is adopted. Specifically, a local damage model based on the concept of yield surface is proposed and deeply investigated. Among the many possibilities, we choose in this work its coupling with a generalized Kelvin–Voigt rheological model to formulate the whole behavior. Long‐term as well as short‐term relaxation processes can be integrated in the model by means of as many as necessary viscoelastic processes. The numerical discretization is described for an easy integration within a finite element procedure. Finally, a set of numerical simulations is given to show the possibilities of the presented model. It shows good agreement with some experimental results found in the literature. Copyright © 2012 John Wiley & Sons, Ltd.     

Water waves generated by instantaneous disturbances at the bed of a sloping beach

The two-dimensional problem of the generation of water waves due to instantaneous disturbances prescribed at the bed of a beach sloping at an arbitrary angle is studied here. It is formulated in terms of an initial-boundary-value problem for the velocity potential describing the motion in the fluid region assuming the linear theory. Using the Laplace transform in time and the Mellin transform in distance, the problem is reduced to solving a difference equation whose method of solution is of considerable importance in the literature. The form of the free surface is obtained in terms of a multiple infinite integral that is evaluated by the method of steepest-descent. For some prescribed forms of the disturbance at the bed of the beach, the free surface is depicted in a number of figures for different beach angles. It is observed that as the beach angle decreases, the maximum wave height increases, which is plausible.     

Calculating actual crop evapotranspiration under soil water stress conditions with appropriate numerical methods and time step

Calculation of actual crop evapotranspiration under soil water stress conditions is crucial for hydrological modeling and irrigation water management. Results of actual evapotranspiration depend on the estimation of water stress coefficient from soil water storage in the root zone, which varies with numerical methods and time step used. During soil water depletion periods without irrigation or precipitation, the actual crop evapotranspiration can be calculated by an analytical method and various numerical methods. We compared the results from several commonly used numerical methods, including the explicit, implicit and modified Euler methods, the midpoint method, and the Heun's third‐order method, with results of the analytical method as the bench mark. Results indicate that relative errors of actual crop evapotranspiration calculated with numerical methods in one time step are independent of the initial soil water storage in the range of soil water stress. Absolute values of relative error decrease with the order of numerical methods. They also decrease with the number of time step, which can ensure the numerical stability of successive simulation of soil water balance. Considering the calculation complexity and calculation errors caused by numerical approximation for different time step and maximum crop evapotranspiration, the explicit Euler method is recommended for the time step of 1 day (d) or 2 d for maximum crop evapotranspiration less than 5 mm/d, the midpoint method or the modified Euler method for the time step of up to one week or 10 d for maximum crop evapotranspiration less than 5 mm/d, and the Heun's third‐order method for the time step of up to 15 d. Copyright © 2011 John Wiley & Sons, Ltd.