高分辨率航磁方法及在大冶铁矿区的应用

本文针对危机矿山深部及周边找矿的难度大、勘探周期短的特点,提出了一套以找矿为目的,集直升机大比例尺航空物探测量、数据处理、解释为一体的高分辨率航磁方法技术.这些方法包括硬架式直升机航磁测量方法、曲面位场处理方法、精细反演解释方法等.应用该方法在湖北黄石大冶铁矿中布钻,已有两孔见富磁铁矿及伴生的铜、金矿,见矿最大厚度为14.6m.因此,高分辨率航磁方法在危机矿山进一步挖潜工作中可以实现快速找矿目的.     

物探方法在复兴屯银铅锌多金属矿区构造与成矿机理研究中的应用

复兴屯银铅锌多金属矿是近两年在大兴安岭成矿带中生代陆相火山盆地里首次发现的特大型银铅锌多金属矿床.在矿床普查与勘查期间开展了地面高精度磁测、时间域激发极化法面积性测量、AMT电磁测深等物探方法,发挥了重要指导作用.①通过地面磁异常数据RGIS软件处理解释判定了普查区构造构局;②综合利用地磁异常和视电阻率异常特征,结合地...     

广东三水盆地西缘横江铅锌矿床的成矿时代及新生代找铜前景

近年来,在广东三水盆地及其西缘三洲盆地中,先后发现了长坑大型金矿床和富湾超大型银矿床及横江、茶山等铅锌矿床。为了查明横江铅锌矿床的成矿时代,文章采用了两种不同的方法,在两个不同的实验室内,分别测得该矿床中石英的形成年龄为35Ma(流体包裹体Rb_Sr等时线法)和36~39Ma(40Ar/39Ar快中子活化法),两者基本一致。这表明多金属成矿作用发生在渐新世,晚于长坑金矿床和富湾银矿床。最近,在横江铅锌矿床中发现铜的含量也很高。矿石中金属矿物主要是黄铜矿、辉铜矿、闪锌矿和方铅矿。因此,铜矿化的存在与富集,为三水盆地及其周边地区贵金属和有色金属的地质找矿提供了重要的新线索,同时也为在其他盆地区寻找有色金属矿床打开了新的思路。     

浅层地震勘探在沿海地区隐伏断层探测中的应用

中国沿海地区的第四系厚度变化较大,在大部分地区存在淤泥、黏土和砂层的多重互层情况,这种地层结构对地震波的传播十分不利,容易造成对高频信号能量的强烈耗散。沿海地区又具有人口密度大、工业干扰强烈的特点,地震波的激发、接收条件较差。文中给出了在粤东、天津和唐山覆盖层厚度变化较大的地区,利用浅层地震勘探开展隐伏断层探测的应用实例。较系统地介绍了野外工作、资料处理和解释方法。阐述了在强干扰环境下提高信噪比和分辨率的有效技术途径。所给实例中的反射波组能量强,隐伏断层的反应明显,经跨断点钻探验证,结果证实地震勘探确定的界面深度、断点位置和基岩错距等参数都是可靠的。所述技术方法对类似地区的城市活断层探测和工程物探工作都有较重要的参考价值     

山西交城断裂带西张探槽全新世古地震研究

西张探槽①位于山西太原市西北10km,沿交城断裂带北段NNW方向高4.6m的低陡坎前缘开挖。探槽长108m,宽8m,深10m,揭露18层地层。探槽上部地层为亚砂土,探槽内断层下降盘的上部地层为一套砾石层,下部地层为一套褐色垆土与亚砂土互层,断层的上升盘地层以亚砂土为主夹砾石层。探槽揭露出3条断面,断面的上断点距地表1.5m,断错的最新地层距今(3.74±0.06)ka。探槽揭示出断面、地层断错、崩积楔、地层倾斜等现象。由探槽揭露出的地层与断层的关系可知早全新世以来交城断裂带曾发生3次断层活动事件,其时间分别为距今(3.74±0.06)～(3.06±0.26)ka、(8.35±0.09)～(3.74±0.06)ka与(10.66±0.85)～(8.35±0.09)ka,具有2.6～3.6ka的强震重复间隔;3次同事件最小垂直位移分别为3.0m、2.5m及3.2m。西张探槽的意义在于揭示了历史上未有强震记载的晋中盆地几千年前有过多次强震活动。西张探槽获得的交城断裂带全新世古地震活动的依据,对评价太原市未来的强震危险性具有重要意义     

近区瞬变场的频率效应与大深度探测能力的研究

在时域中,磁源近区瞬变场的时间特性取决于场源所含低频谱的分数幂.对于磁感应强度Bz(t)∝∑iω3/2i,对于感应电势εz(t)∝∑iω5/2i.这表明,现有的瞬变电磁探测系统只适用于浅部勘查,对于大深度的勘查,需要研制超强能量且轻便化的场源(发送系统),同时完善超导磁强计(接收系统)的实用化.     

巴布亚盆地侏罗系陆架边缘三角洲沉积特征及其油气勘探方向

为明确巴布亚盆地主要的含油气系统发育层段——侏罗系的沉积特征及其与油气勘探的关系,在分析前人研究成果、沉积背景与古物源的基础上,通过地震相、测井相、岩心相"三相"联合分析及与周边的布劳斯盆地的类比,识别了沉积微相类型,刻画了沉积体系的纵横向展布特征;通过不同沉积相带生烃指标、储层物性参数对比,明确了有利的烃源岩与储层发...     

Application of stress mapping in cross‐section to understanding ore geometry,predicting ore zones and development of drilling strategies

Stress mapping is a numerical modelling technique used to determine the distribution and relative magnitude of stress during deformation in a mineralised terrane. It is based on the general principle that fluid flow in the Earth's crust is primarily related to pressure gradients. It is best applied to epigenetic hydrothermal mineral deposits, where fluid flow and fluid flux are enhanced in dilational sections of structures and in sites of enhanced rock permeability due to high fracture density. These are defined by sites of low minimum principal stress (σ₃). Most stress mapping is carried out in two dimensions in plan view using geological maps. This is suitable for terranes with steeply dipping lithostratigraphy and structures in which the distribution of mineral deposits is largely controlled by fault structures portrayed on the maps. However, for terranes with gently dipping sequences and structures, and for situations where deposits are sited in and near the hinges of complex fold structures, stress mapping in cross‐section is preferable. The effectiveness of stress mapping is maximised if mineralisation was late in the evolutionary history of the host terrane, and hence the structural geometry of the terrane and contained deposits were essentially that expressed today. The orientation of syn‐mineralisation far‐field stresses must also be inferred. Two examples of orogenic gold deposits, which meet the above criteria, are used to illustrate the potential of stress mapping in cross‐section. Sunrise Dam, located in the Archaean Yilgarn Craton, is a lode‐gold deposit sited in a thrust‐fold belt. Stress mapping illustrates the heterogeneity of stress distribution in the complex structural geometry of the deposit, and predicts the preferential siting of ore zones around the intersections of more steeply dipping, linking thrusts and banded iron‐formation units, and below the controlling more gently dipping basal thrust, the Sunrise Shear. The Howley Anticline in the Pine Creek block hosts several Palaeoproterozoic gold deposits, sited in complex anticlinal structures in greywacke sequences. Stress mapping indicates that gold ores should develop in the hinge zones of symmetrical anticlines, in the hinge zones and more steeply dipping to overturned limbs of asymmetric anticlines, and in and around thrusts in both anticlines and parasitic synclines. The strong correlation between the predictions of the stress mapping, based on the distribution of low σ₃, and the location of gold ores emphasises the potential of stress mapping in cross‐section, not only as an exploration tool for the discovery of additional resources or deposits, but also as a test of geological models. Knowledge of the potential siting of gold ores and their probable orientations also provides a guide to drilling strategies in both mine‐ and regional‐scale exploration.     

磁法勘探在新疆尉犁县且干布拉克蛭石、磷灰石矿床普查评价中的应用效果

尉犁县且干布拉克蛭石矿为特大型,磷灰石矿为大型.蛭石、磷灰石均赋存于磁性较强的透辉石岩及超基性岩中,矿体与围岩间有较明显的磁性差异,含矿母岩70%被第四系覆盖.利用地面磁测,较好地圈定了含矿母岩的边界,提供了含矿体的平面形态及产状,为勘查缩小了靶区.磁法勘探不仅是直接找磁铁矿床及某些有关金属矿床的有效方法,而且在间接寻找非金属矿床上亦能发挥作用.