From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

Weathering: Toward a Fractal Quantifying

Weathering occurs over a wide range of scales. To link features through these scales is a major challenge for interdisciplinary weathering studies. Fractal approach seems to be specially useful for this purpose. We introduce a multistep fractal weathering assessment scheme devoted to extract fractal weathering classifiers from texture analysis of the mineral's image. Our scheme enables to quantitatively estimate the global and local information about the geometry of the weathering pattern. This information is basic to develop geometrical indices of weathering, which can significantly enrich the common qualitative and semiquantitative weathering assessment schemes. To justify the fractal approach, a strong statistical self-similarity has been documented for both the weathering and fresh features of two common silica minerals: quartz and biogenic A-opal (phytolith) over four orders of length scales. The procedure is fast, drastically reduces thresholding bias, promises to be universal, it is valid for genetically different minerals and rock types, scale independent, and specially useful for monitoring the changes in the mineral's roughness during the alteration. Two of the proposed classifiers seem to be potentially useful for direct application in the field and be used by nonspecialist.     

湖北宜昌石板溪金矿区断层空间结构及其控矿规律研究

断层空间结构包括变形结构和几何结构两部分。本文在解析石板溪金矿区主要断层变形结构和几何结构的基础上，探讨了其空间结构模式和控矿规律。     

珠江口盆地基底结构的综合地球物理研究

通过对珠江口盆地重磁资料的分析处理及反演计算，依据盆地的地质、地球物理特征，采取了针对性的综合地球物理研究思路与方法，对地震资料难以解决的珠江口盆地基底结构进行了研究，确定了盆地的重力和磁性基底深度，并对盆地内的断裂和基底岩性作了推断，提供了新的认识，为今后研究提供了依据。     

Delineating groundwater potential zones in a hard-rock terrain using geospatial tool

Abstract

Geospatial techniques have become one of the leading tools in the field of natural sciences for assessment, monitoring and management of natural resources, particularly in groundwater research. The paper discusses the demarcation and assessment of groundwater potential zones using geospatial techniques in the Deccan Volcanic Province of Maharashtra, India, using multi-criteria analyses. The study incorporates integration of thematic information (geomorphology, lithology, drainage density, slope and lineaments) in a GIS environment in order to identify groundwater potential zones. The methodology adopted can be used as a rapid assessment tool in groundwater exploration and is helpful in predictive groundwater resource management. Multi-criteria evaluation techniques were used to integrate all the thematic layers. Individual themes and their corresponding categories were assigned a knowledge base ranking from 1 to 5, depending on their importance for groundwater potential. Using the Raster calculator tool in Arc GIS software, all thematic maps were integrated to produce a composite groundwater potential map of the study area. The identified groundwater potential zones were classified into four classes, from excellent to poor. The generated groundwater potential zones were validated with field checks and borewell/dugwell yield data, and showed consistency with the observations.

Citation Singh, P., Thakur, J. K., and Kumar, S. (2013) Delineating groundwater potential zones in a hard-rock terrain using geospatial tools. Hydrological Sciences Journal, 58 (1), 1–11.     

Evidence for deep groundwater flow and convective heat transport in mountainous terrain, Delta County, Colorado, USA

The Tongue Creek watershed lies on the south flank of Grand Mesa in western Colorado, USA and is a site with 1.5 km of topographic relief, heat flow of 100 mW/m², thermal conductivity of 3.3 W m^–1 °C^–1, hydraulic conductivity of 10^-8 m/s, a water table that closely follows surface topography, and groundwater temperatures 3–15°C above mean surface temperatures. These data suggest that convective heat transport by groundwater flow has modified the thermal regime of the site. Steady state three-dimensional numerical simulations of heat flow, groundwater flow, and convective transport were used to model these thermal and hydrological data. The simulations provided estimates for the scale of hydraulic conductivity and bedrock base flow discharge within the watershed. The numerical models show that (1) complex three-dimensional flow systems develop with a range of scales from tens of meters to tens of kilometers; (2) mapped springs are frequently found at locations where contours of hydraulic head indicate strong vertical flow at the water table, and; (3) the distribution of groundwater temperatures in water wells as a function of surface elevation is predicted by the model.     

Single explosions at Stromboli in 2002: Use of clast microtextures to map physical diversity across a fragmentation zone

A combination of fortuitous eruptive and wind conditions at Stromboli volcano in September 2002 enabled the collection of samples of multiple lapilli from individual observed explosions. These ejecta present the first opportunity to analyze the vesicularity of material ejected in a single Strombolian explosion. Samples of between 40 and 92 lapilli were collected from each of six sequential explosions on 30 September 2002, and 28 lapilli were obtained from a single explosion  24 h later (1 October). Density measurements and microtextural observations show that considerable heterogeneity existed within each of the seven samples. Centimeter to millimeter size bubble-rich and bubble-poor zones are present and are, in places, mingled together. These data confirm that the shallow conduit at Stromboli is a texturally diverse environment at the instant of a single explosion, and that a similar range of heterogeneity can persist through closely-spaced sequences of explosions on a timescale of hours and, probably, days, despite the dynamic processes of ascent of melt and decoupled gas phases.     

Bubble growth in highly viscous melts: theory, experiments, and autoexplosivity of dome lavas

We examine the physics of growth of water bubbles in highly viscous melts. During the initial stages, diffusive mass transfer of water into the bubble keeps the internal pressure in the bubbles close to the initial pressure at nucleation. Growth is controlled by melt viscosity and supersaturation pressure and radial growth under constant pressure is approximately exponential. At later stages, internal pressure falls, radial growth decelerates and follows the square-root of time. At this stage it is controlled by diffusion. The time of transition between the two stages is controlled by the decompression, melt viscosity and the Peclet number of the system. The model closely fit experimental data of bubble growth in viscous melts with low water content. Close fit is also obtained for new experiments at high supersaturation, high Peclet numbers, and high, variable viscosity. Near surface, degassed, silicic melts are viscous enough, so that viscosity-controlled growth may last for very long times. Using the model, we demonstrate that bubbles which nucleate shortly before fragmentation cannot grow fast enough to be important during fragmentation. We suggest that tiny bubbles observed in melt pockets between large bubbles in pumice represent a second nucleation event shortly before or after fragmentation. The presence of such bubbles is an indicator of the conditions at fragmentation. The water content of lavas extruded at lava domes is a key factor in their evolution. Melts of low water content (<0.2 wt%) are too viscid and bubbles nucleated in them will not grow to an appreciable size. Bubbles may grow in melts with 0.4 wt% water. The internal pressure in such bubbles may be preserved for days and the energy stored in the bubbles may be important during the disintegration of dome rocks and the formation of pyroclastic flows.     

A HORIZONTAL 2-D HYDRAULIC NUMERICAL MODEL AND IT’S APPLICATIONS TO FLOOD FORECAST

1 INTRODUCTION There were many flood disasters in China in recent years. When the water level in a river is very high, weak parts of its dike may be destroyed resulted in the submersion of the protected land and properties. It is of significance for decision-makers to exactly predict the processes of flood propagation during flood control. There are many modes of dike bursting, such as seepage destroying by overflow on top of dike caused by dike body sinking induced by piping and soil fl…     

Regional‐scale sedimentation process models from airborne gamma ray remote sensing and digital elevation data

Airborne gamma ray survey data were used to provide information on potassium, thorium and uranium concentrations in surface soil and rock in arid central Australia. Spatial patterns in these radioelements allow tracing of paths of sediment at catchment scale. Survey elevation data are combined with contour data to produce digital elevation models for terrain analysis, tracing of sediment flow paths and modelling of extreme floods. Gamma ray data show consistent variation with slope, a limited range of drainage areas, and erosion/deposition models derived from the conservation of mass equation. Supply‐limited sediment transport models give a reasonable reproduction of observed radioelement distribution but some elements of the distribution pattern reflect the area inundated by 500–1000 year floods rather than the effects of simple downslope movement. Partial area sediment supply models are derived by downstream accumulation of erosion and deposition rates calculated using the conservation of mass equation with transport laws based on slope alone and stream power. Comparison with observed radioelement patterns suggests that both transport laws apply in different parts of the landscape. Regional‐scale sediment transport models will require a range of models depending on location in the landscape and event frequency. This approach may allow estimation of sediment delivery ratios. Copyright © 2001 John Wiley & Sons, Ltd.