Average slip rate,earthquake rupturing segmentation and recurrence behavior on the Litang fault zone,western Sichuan Province,China

The Litang fault zone (LFZ) is an important active fault within the northwestern Sichuan sub-block. To-gether with the Garzê-Yushu, Xianshuihe, and An-ninghe fault zones on its northern, eastern and south-eastern sides, the LFZ constitutes the lateral extrusion tectonic system in the southeastern part of the Qing-hai-Tibetan Plateau[1,2] (Fig. 1). According to instru-mental records, historical recordings and field investi- gation, an earthquake (Ms7.3) occurred on its middle to south se…     

淡化速度和幅度对凡纳对虾幼体存活和活力的影响

进行了淡化速度、幅度对凡纳对虾(Litopenaeus vannamei)的影响试验,结果表明：每36h和24h降低盐度2～3的两种淡化速度,对虾苗存活率较高,分别为86．7％和83．3％;淡化时间分别为396h和264h。每12h降低盐度2～3的淡化速度,从盐度29．7降至16．3,存活率为90．0％;从盐度16．3降至0,成活率为60.3％。每次降幅为1．3～1．4和2．6～2．7时,最终存活率较高,最终淡化到纯淡水中的存活率分别为83.3％和80．0％。每次降幅度为5.3～5．4时,在降到19．0以前,存活率都还较高,但此后的效果不佳,淡化至淡水时,成活率仅为53.3％。     

Piping dynamics in mid‐altitude mountains under a temperate climate: Bieszczady Mountains,eastern Carpathians

Piping has been recognized as an important geomorphic, soil erosion and hydrologic process. It seems that it is far more widespread than it has often been supposed. However, our knowledge about piping dynamics and its quantification currently relies on a limited number of data for mainly loess‐derived areas and marl badlands. Therefore, this research aimed to recognize piping dynamics in mid‐altitude mountains under a temperate climate, where piping occurs in Cambisols, not previously considered as piping‐prone soils. It has been expressed by the estimation of erosion rates due to piping and elongation of pipes in the Bere?nica Wy?na catchment in the Bieszczady Mountains, eastern Carpathians (305 ha, 188 collapsed pipes). The research was based on the monitoring of selected piping systems (1971–1974, 2013–2016). Changes in soil loss vary significantly between different years (up to 27.36 t ha^?1 yr^?1), as well as between the mean short‐term erosion rate (up to 13.10 t ha^?1 yr^?1), and the long‐term (45 years) mean of 1.34 t ha^?1 yr^?1. The elongation of pipes also differs, from no changes to 36 m during one year. The mean total soil loss is 48.8 t ha^?1 in plots, whereas in the whole studied catchment it is 2.0 t ha^?1. Hence, piping is both spatially and temporally dependent. The magnitude of piping in the study area is at least three orders of magnitude higher than surface erosion rates (i.e. sheet and rill erosion) under similar land use (grasslands), and it is comparable to the magnitude of surface soil erosion on arable lands. It means that piping constitutes a significant environmental problem and, wherever it occurs, it is an important, or even the main, sediment source. Copyright © 2017 John Wiley & Sons, Ltd.     

南极伊利莎白公主地250年来雪芯累积、氧同位素与化学研究

1Introduction In the ongoing discussion of climate change,the mass balance of Antarctica has received increasing attention during recent decades,since its reaction to global warming will strongly influence sea-level change(Schlosser and Oerter,2002).Many …     

GPS应变率场计算方法研究进展

基于大地测量资料获取地壳运动与应变积累定量结果一直是国内外重视的地震中长期预测的技术途径。 针对地震变形过程的准确描述问题, 国内外学者基于GPS资料, 发展了多种应变率场解算方法。 本文首先简要介绍了GPS应变率计算的基本原理, 然后系统梳理了国内外多种计算方法的优势和不足, 结果表明: 应变率计算的数学方法只考虑几何关系, 其中整体方法主要适合数据密度和分布较好条件下获取区域地壳变形分布与趋势, 局部方法主要适用于数据较为稀疏情况下描述构造块体的变形特征; 应变率计算的物理方法既考虑几何关系又考虑物理关系, 其中, 位错方法根据主要适合于研究区域存在主控断层的情况(研究区域的变形主要由少数断层控制); 数值模拟方法(如有限元法)主要适用于区域地质、 地球物理的资料比较完备的情况。     

Predicting reach‐specific properties of fluvial terraces to guide future fieldwork. A case study for the Late Quaternary River Allier (France) with the FLUVER2 model

Numerical models have not yet systematically been used to predict properties of fluvial terrace records in order to guide fieldwork and sampling. This paper explores the potential of the longitudinal profile model FLUVER2 to predict testable field properties of the relatively well‐studied, Late Quaternary Allier system in France. For the Allier terraces an overlapping ¹⁴C and U‐series chronology as well as a record of ¹⁰Be erosion rates exist. The FLUVER2 modelling exercise is focused on the last 50 ka of the upper Allier reach because for this location and period the constraints of the available dating techniques are tightest. A systematic calibration based on terrace occurrence and thicknesses was done using three internal parameters related to (1) the sediment erodibility; (2) the sediment transport distance; and (3) the sediment supply derived from the surrounding landscape. As external model inputs, the best available, reconstructed, tectonic, climatic and base‐level data were used. Calibrated model outputs demonstrate a plausible match with the existing fluvial record. Validation of model output was done by comparing the modelled and measured timing of aggradation and incision phases for the three locations. The modelled range of landscape erosion rates showed a reasonably good match with existing erosion rate estimates derived from ¹⁰Be measurements of fluvial sands. The quasi‐validated model simulation was subsequently used to make new testable predictions about the timing and location of aggradation and erosion phases for three locations along the Allier river. The validated simulations predict that along the Allier, reach‐specific dynamics of incision and aggradation, related to the variations in sediment supply by major tributaries, cause relevant differences in the local fluvial terrace stratigraphy. Copyright © 2016 John Wiley & Sons, Ltd.     

几种电法仪器在地质勘查中的应用

文章介绍了几类物探电法仪器的工作原理、技术特点和适用范围,强调了物探资料的合理解释必须与地质认识相结合的重要性,物探工作要做实做细,对物探原始资料要选择合理的方法与参量进行计算处理,结合一些具体的勘测实例,说明各种方法的有效性及其实际应用效果.     

�����ص�������Ⱦ�ʹ���

????????????????????????????????????????????б????????????????????????????????????????????????????????????????????????????????????????仯?????????仯???????????????????????????δ??????????????????????????????????????????仯????????????????????????е?????????????????????????????????????????????????????????????С???????????0.01??????????????????1???????????????????????????????Ч???????     

重庆万州区山地分类定量化研究

文章在GIS技术支持下,基于水文分析模型,通过DEM数据,结合山地综合分类模型,以重庆市万州区为例,对山地进行定量化分类研究,结果表明:以负地形洼地贡献区域作为山地相对高程的起算面,完全摆脱了人为因素的影响,解决了一直以来难以确定山地相对高度起算范围的难题;以负地形洼地深度作为山地相对高程是正确可行的,且能快速获取山地的相对高程;以山地表面积代替投影面积计算山地率更切合实际.