融合GNSS和加速度计监测数据的超高建筑动态特性分析

GNSS和加速度计是目前动态监测超高建筑环境载荷变形的主要手段。GNSS具有无需通视、可直接获取三维位移等优点,但受精度和采样率的限制,其对微变形及高频振动信息不敏感;而加速度计具有高精度和高采样率等优点,但无法监测超高建筑低频的似静态变形。为充分发挥这两种传感器的各自优势,提出利用多速率Kalman滤波和RTS平滑方法对超高建筑GNSS和加速度计监测数据进行融合处理。试验结果表明,与单一的GNSS监测技术相比,该方法有利于削弱GNSS高频噪声的影响,提高位移数据的采样率,可有效识别超高建筑的低频和高频振动频率,提高对微变形振动的监测能力;与单一的加速度计监测技术相比,该方法可以准确监测超高建筑的低频变形信息,具有良好的工程应用价值。     

Direct numerical simulation of flow over a slotted cylinder at low Reynolds number

Direct numerical simulation was conducted to investigate the flow past a slotted cylinder at low Reynolds number (Re) of 100. The slotting of cylinder affects the boundary layer separation, vortex formation position, recirculation region length and wake width, which are determined by the type of slit. The streamwise slit (SS1), T-shaped slit (SS3) and Y-shaped slit (SS4) act as passive jets, while the transverse slit (SS2) achieves an alternate self-organized boundary layer suction and blowing. The flow rate in slits fluctuates over time due to the alternate vortex shedding and fluctuating pressure distribution around the cylinder surface. One fluctuation cycle of flow rate is caused by a pair of vortices shedding for SS2, SS3 and SS4, while it is created by each vortex shedding for SS1. The wall shear stress and flow impact on the slit wall partly contribute to the hydrodynamic forces acting on the slotted cylinder. Taking into account the internal wall of slit, the transverse slit plays the best role in suppressing the fluid forces with drag reduction of 1.7% and lift reduction of 17%.     

Uncertainty analysis of soil-pile interactions of monopile offshore wind turbine support structures

The objective of this work is to study the uncertainties involved in the modelling of the soil-pile interaction concerning their influence on the prediction of the dynamic structural response of monopile offshore wind turbine support structures. Two main issues are identified and addressed: the adequacy of the method used to deal with the soil-pile interactions and the adequacy of the soil properties reflecting the behaviour of the soil. The present study develops an approach that defines the penetrated pile length depending on the soil profile. Also, a parameter is defined to avoid the excessive usage of steel for the penetrated pile structure. The uncertainties are included in the probabilistic free vibration analysis and the contribution of each random variable to the scatter of the response is estimated by performing a sensitivity analysis. The results indicate that the uncertainty involved in the modelling of the soil profile has a significant effect on the coefficient of variance of the natural frequency, which is a serious issue to be considered in the fatigue life assessment of offshore wind turbine support structures.     

Dynamic modeling and vibration suppression for an offshore wind turbine with a tuned mass damper in floating platform

The worldwide demand for renewable energy is increasing rapidly. Wind energy appears as a good solution to copy with the energy shortage situation. In recent years, offshore wind energy has become an attractive option due to the increasing development of the multitudinous offshore wind turbines. Because of the unstable vibration for the barge-type offshore wind turbine in various maritime conditions, an ameliorative method incorporating a tuned mass damper (TMD) in offshore wind turbine platform is proposed to demonstrate the improvement of the structural dynamic performance in this investigation. The Lagrange's equations are applied to establish a limited degree-of-freedom (DOF) mathematical model for the barge-type offshore wind turbine. The objective function is defined as the suppression rate of the standard deviation for the tower top deflection due to the fact that the tower top deflection is essential to the tower bottom fatigue loads, then frequency tuning method and genetic algorithm (GA) are employed respectively to obtain the globally optimum TMD design parameters using this objective function. Numerical simulations based on FAST have been carried out in typical load cases in order to evaluate the effect of the passive control system. The need to prevent the platform mass increasing obviously has become apparent due to the installation of a heavy TMD in the barge-type platform. In this case, partial ballast is substituted for the equal mass of the tuned mass damper, and then the vibration mitigation is simulated in five typical load cases. The results show that the passive control can improve the dynamic responses of the barge-type wind turbine by placing a TMD in the floating platform. Through replacing partial ballast with a uniform mass of the tuned mass damper, a significant reduction of the dynamic response is also observed in simulation results for the barge-type floating structure.     

Nonplanar multi-modal vibrations of fluid-conveying risers under shear cross flows

Risers/pipes conveying fluid are a typical kind of slender structures commonly used in marine engineering. It is of great academic significance and application value for us to evaluate and understand the vibration characteristics and nonlinear responses of these risers under the combined action of internal and external fluid flows. In this paper, the nonplanar vibrations and multi-modal responses of pinned-pinned risers in shear cross flow are numerically studied. With this objective in mind, the van der Pol wake oscillators are used to simulate the dynamical behavior of the vortex shedding in the wake. Two nonlinear equations of motion of the riser are proposed to govern the lateral responses of the riser structure. The nonplanar nonlinear equations for the riser and wake are then discretized by employing Galerkin's method and solved by using a fourth-order Runge–Kutta integration algorithm. Theoretical results show that the coupled frequencies for cross-flow (CF) and in-line (IL) motions and the corresponding coupled damping ratio could be influenced by the external and/or internal fluid velocities. Based on extensive calculations, the dynamical behavior of the riser with various internal and external flow velocities are presented in the form of bifurcation diagrams, time traces, phase portraits, oscillation trajectories and response spectrum curves. It is shown that some interesting dynamical phenomena, such as ‘lock-in’ state, ‘figure-of-eight’ trajectory and quasi-periodic oscillation, could occur in such a fluid-structure interaction system. Our results also demonstrate that the shear parameter can significantly affect the dynamic responses of the riser. When the shear parameter of the cross flow is large, multi-modal quasi-periodic responses of the riser can be excited, showing some new features undetected in the system of fluid-conveying risers in uniform cross flow.     

Experimental Study on Coupled Cross-Flow and in-Line Vortex-Induced Vibration of Flexible Risers

In this work, we study the coupled cross-flow and in-line vortex-induced vibration （VIV） of a fixedly mounted flexible pipe, which is free to move in cross-flow （ Y- ） and in-line （ X- ） direction in a fluid flow where the mass and natural frequencies are precisely the same in both X- and Y-direction. The fluid speed varies from low to high with the corresponding vortex shedding frequency varying from below the first natural frequency to above the second natural frequency of the flexible pipe. Particular emphasis was placed on the investigation of the relationship between in-line and cross-flow vibration. The experimental results analyzed by using these measurements exhibits several valuable features.     

Hill Instability Analysis of TLP Tether Subjected to Combined Platform Surge and Heave Motions

This paper presents the Hill instability analysis of Tension keg Platform （TLP） tether in deep sea. The 2-D nonlinear beanl model, which is undergoing coupled axial and transverse vibrations, is applied. The governing equations are reduced to nonlinear Hill equation by use of the Galerkin＇ s method and the modes superposition principle. The Hill instability charted up to large parameters is obtained. An important parameter M is defined and can be expressed as the functions of tether length, the platform surge and heave motion amplitudes. Some example studies are performed for various envirotnnental conditions. The results demonstrate that the nonlinear coupling between the axial and transverse vibrations has a significant effect on the response of structure. It needs to be considered for the accurate dynamic analysis of long TI2 tether subjected to the combined platfolna surge and heave motions.     

RTK-GPS�����������񶯵Ķ�Ƶ�ʳɷַ���

???????RTK-GPS(????????λ??)???????????????????????????????????????????????????????RTK-GPS???????????????????????????????????????????????????????????е??     

Identification of a Putative Tetrasporophyte-Specific Gene in Gracilaria lemaneiformis(Gracilariales, Rhodophyte)

A putative tetrasporophyte-specific gene, designated as SSH466 (GenBank accession No. DQ019223), was one of the genes identified in this work using suppression subtractive hybridization (SSH) method in Gracilaria lemaneiformis. The full length of the gene was obtained using SMART RACE strategy. Sequence analysis revealed that the gene had 1 019 nucleotides, including an open reading frame of 498 nucleotides encoding 166 amino acid residues, 158 nucleotides of 5' untranslated region and 363 nucleo- tides of 3' non-coding region. Protein motif and secondary structure prediction showed that there existed a transmembrane domain with a unique β-sheet. Thus, SSH466 protein might be a cross-membrane protein. Sequence homology search in the public GenBank databases did not reveal any significant match with SSH466. Virtual Northern blot analysis confirmed that it was a tetrasporo- phyte-specific gene.     

自升式平台冰激动力响应分析

应用ANSYS软件建立了平台和冰相互作用的有限元模型,构建了自升式平台的冰激振动模型,并计算基于2种冰力模型的自升式平台的动力响应。此动力分析方法具有建模方便和计算精度高的特点。以某自升式平台为例,计算了冰和平台结构相互作用的耦合效应,为自升式平台冰激振动安全评估提供了参考依据。