伽师强震群的深部动力学条件

根据天山造山带及其两侧的塔里木盆地和准噶尔盆地的岩石圈二维速度结构、二维密度结构、二维电性结构、壳幔过渡带的详细结构以及大地热流和震源深度的分布,再结合对新疆西北部的蛇绿岩带、高压变质带和岩浆岩分布的综合分析,建立了天山造山带的地球动力学“层间插入消减”模型。该模型认为,塔里木板块的中上地壳在库尔勒断裂附近向天山造山带的中下地壳层间插入;而下地壳连同岩石圈地幔向天山造山带的上地幔俯冲消减。在天山的西段（哈萨克斯坦境内）,费尔干纳地块由北向南插入到南天山之下约180km的深处,在其东段（中国境内）,塔里木盆地由南向北插入南天山之下。这两个具有不同方向的下降板片的接触部位为费尔干纳走滑断裂。我国的伽师、喀什、乌恰地震区均落在这两个具有不同俯冲方向板块的结合部位附近,有着特殊的深部构造背景。南、北两大板块的双向挤压必定产生强大的应力,在地震区附近,这种应力的积累与释放具有4个显著的特点：（1）板片的俯冲消减速度约高达每年22mm左右;（2）应力的积累与释放速率加快;（3）应力释放较容易;（4）应力释放较为集中。这4个特点可能是伽师地区在较短的时间内连续发生数次强震的构造因素。     

惠民凹陷南坡北北西向走滑断裂带的发育特征及成因分析

通过对惠民南坡前中生代断裂的平面分布和三维地震剖面特征的分析,识别出了一组在平面上相互平行,在剖面上具有负花状构造的北北西向走滑断裂带。通过对负花状构造的形态及其卷入地层特征的分析,认为该组断裂带经历过两期不同性质的走滑运动,在中生代经历了较强的左行张性走滑,在新生代经历了较弱的右行压性走滑。其演化过程与鲁西地块上北北西向走滑断层的演化过程一致,均属于郯庐断裂区域性走滑作用所形成的帚状构造体系的一部分,郯庐断裂在中生代的左行走滑和新生代的右行走滑是控制其发展演化的主要因素。     

白东构造带成因分析

位于渤海湾盆地黄骅坳陷北部的白东构造带,受新构造运动影响形成了整体东西向"S"型展布,堑心组合内断层成弧形交错、南北对掉的"包心菜"状构造。笔者以局部构造变形特征分析为手段,从各层位上堑心构造组合的特殊现象分析出发,认为本区自第三纪以来是在右旋走滑拉分背景下伸展走滑作用的结果。     

DNQ3型能见度仪故障分析及校准方法研究

为有效提高国家地面气象观测站能见度仪观测数据准确性和设备运行稳定性,对能见度仪开展日常维护、核查校准、数据质控和故障修复等工作显得尤为重要。该文通过对DNQ3型前向散射能见度仪硬件结构和基本工作原理的介绍,以及对一些典型故障进行分析,总结出能见度仪的检测维修流程,归纳了对应的故障解决措施,凝练出该型能见度仪的核查校准和疑误数据质控方法,为一线业务人员开展能见度仪常规维护、故障排查、运行监控等提供借鉴。     

Formation and evolution of the South China Sea since the Late Mesozoic: A review

The existing genetic models of the South China Sea(SCS) include an extrusion model of the Indochina Peninsula, a back-arc extension model, and a subduction and dragging model of the Proto-South China Sea(PSCS). However, none of these models has been universally accepted because they do not fully match a large number of geological phenomena and facts. By examining the regional tectonics and integrating them with measured data for the SCS, in this study, a back-arc spreading-sinistral shear model ...     

辽东湾北部地区走滑构造特征与油气富集规律

辽东湾北部地区右行走滑构造特征较为典型,主要表现为:沿走滑断裂带发育雁行式伸展断裂;剖面上发育花状构造;走滑断裂沿走向呈“S”型或反“S”型波状弯曲;沿走滑断裂带断槽与断鼻构造相间分布。分析认为,渐新世晚期,辽东湾北部地区南北向拉张、东西向挤压的区域应力场控制了右行走滑构造的形成,断槽与断鼻构造相间分布是由于沿走滑断裂带局部应力场性质发生改变所致。右行走滑断裂的“S”型弯曲部位为增压弯部位,走滑断裂两侧断块在此汇聚,地层因应力集中而形成断鼻构造;右行走滑断裂的反“S”型弯曲部位为释拉张部位,走滑断裂两侧断块在此离散,地层因拉张而发生断陷形成断槽。受走滑构造所控制,油气沿走滑断层自断槽向断鼻方向运移、聚集而成藏。研究走滑构造发育特征,对于预测圈闭分布以和研究油气富集规律具有重要意义。     

珠江口盆地阳江东凹裂陷期沉积环境及其构造控制

珠江口盆地阳江东凹形成于古近纪裂陷期,广泛发育烃源岩的富存层段——文昌组、恩平组,具有陆相断陷盆地沉积以及构造控制下多幕演化的特征.沉积环境演变以及构造?沉积的耦合作用是陆相断陷盆地的重要研究方向,认识其动态过程可为烃源岩识别和油气评价建立基础.本文从三维地震资料、钻井资料入手,通过地震反射特征和井震联合分析,划分了研...     

Distribution of large-scale detachment faults on mid-ocean ridges in relation to spreading rates

Large-scale detachment faults on mid-ocean ridges （MORs） provide a window into the deeper earth. They have megamullion on their corrugated surfaces, with exposed lower crustal and upper mantle rocks, rela- tively high residual Bouguer gravity anomaly and P-wave velocity, and are commonly associated with ocean- ic core complex. According to 30 detachment faults identified on MORs, we found that their distances to the axis mostly range from 5 to 50 km, half-spreading rates range from 6.8 to 17 mm/a, and activity time ranges from recent to 3 Ma. Most of the detachment faults are developed on the slow spreading Mid-Atlantic Ridge （MAR） and ultra-slow spreading Southwest Indian Ridge （SWIRl, with the dominant half-spreading rates of 7-13 mm/a, especially 10-13 mm/a. Furthermore, they mostly occur at the inside corner of one segment end and result in an asymmetric seafloor spreading. The detachment faults on MORs are mainly controlled by the tectonism and influenced by the magmatism. Long-lived detachment faults tend to be formed where the ridge magma supply is at a moderate level, although the tectonism is a first-order controlling factor. At the slow spreading ridges, detachment faults tend to occur where local magma supply is relatively low, whilst at the ultra-slow spreading ridges, they normally occur where local magma supply is relatively high. These faults are accompanied by hydrothermal activities, with their relationships being useful in the study of hydrothermal polymetallic sulfides and their origin.     

莱州湾地区郯庐断裂带的构造特征及其新生代演化

郯庐断裂带中段分东西两支从莱州湾进入渤海,在莱州湾地区的构造特征与演化历史一直鲜为人知。通过对横穿研究区的两条地震测线的解释和分析,揭示了该区郯庐断裂带中段在研究区的构造差异,研究表明郯庐断裂带东西两支在该研究区表现出不同的断裂性质,西支断裂表现为正断层,东支断裂表现为走滑断层。郯庐断裂是本研究区的主控断裂,通过对本地区地层形态及其组合、断层的剖面形态和空间展布规律的深入研究,揭示了郯庐断裂带在莱州湾地区新生代以来的构造演化历史:古新世—始新世的伸展阶段、渐新世—中新世早期的挤压和右行走滑阶段、中新世中晚期至今的稳定发展阶段,这几个不同时期的演化阶段主要受太平洋板块运动的方向和速度变化的控制。     

Occurrence of pockmarks on the Ortegal Spur continental margin,Northwestern Iberian Peninsula

A total of 445 pockmarks were observed on the upper continental slope of the northwest corner of the Iberian Peninsula (the Ortegal Spur area) by swath bathymetric and ultrahigh resolution seismic data. The pockmarks are U-, V- and W-shaped and have terraces or indentations in cross-section, and are dish-shaped (circular to oval) in plan view. They occur on the surface of the seabed and buried within the Plio-Quaternary and Neogene sediments. Four types of pockmarks were identified and mapped on the basis of their plan-view and cross-section morphology: regular, irregular, asymmetric and composite. The concentration of pockmarks is attributed to seepage of fluids migrating up-dip from deeper parts of the sedimentary basin. A linear high-density concentration with a NNW to N, NE and ESE trend of pockmarks is observed above inferred basement faults that do not affect the Quaternary succession. These pockmarks are thus caused by seepage of thermogenic gas and/or other pore fluids from deeper Late Cretaceous units, and their distribution may help to improve our understanding of the fluid system and migration regime in this part of the Galicia continental margin.