鲁北平原区井灌回归系数分析

利用井灌回归系数计算回归补给水量,是地下水资源评价计算井灌回归水量的基本方法。井灌回归系数确定的合理与否,直接影响到地下水资源评价成果的合理性。以试验站的观测资料为基础,结合引水灌溉调查成果,对影响井灌回归系数大小的因素和区域分布规律进行了系统分析,依地下水埋深和灌溉方式划分引黄灌区、井河结合灌区、井灌区三种类型,分析确定鲁北平原区适用的井灌回归系数。     

水泥粉煤灰加固有机质土的试验研究

对于高有机质含量的泻湖相软土,单纯采用水泥不能有效提高该软土的力学性能,因此提出了采用水泥和粉煤灰作为固化剂的加固方法。通过不同水泥掺入量、粉煤灰掺入量和龄期下水泥土的无侧限抗压强度试验,分析了水泥粉煤灰固化土的强度规律和变形规律,探讨了水泥和粉煤灰加固高有机质含量软土的机理。结果表明,粉煤灰对于水泥试块的早期强度影响较小,对后期强度影响较大;粉煤灰最佳掺入量为12％,超过此掺入量水泥土强度反而会降低,粉煤灰水泥土的破坏应变、E50也在粉煤灰掺量为12％时分别达到最低值和最大值。水泥掺加粉煤灰可有效地提高高有机质含量软土的强度。     

Strain localization due to structural in-homogeneities in the Central European Basin System

The large-scale crustal deformations observed in the Central European Basin System (CEBS) are the result of the interplay between several controlling factors, among which lateral rheological heterogeneities play a key role. We present a finite-element integral thin sheet model of stress and strain distribution within the CEBS. Unlike many previous models, this study is based on thermo-mechanical data to quantify the impact of lateral contrasts on the tectonic deformation. Elasto-plastic material behaviour is used for both the mantle and the crust, and the effects of the sedimentary fill are also investigated. The consistency of model results is ensured through comparisons with observed data. The results resemble the present-day dynamics and kinematics when: (1) a weak granite-like lower crust below the Elbe Fault System is modelled in contrast to a stronger lower crust in the area extending north of the Elbe Line throughout the Baltic region; and (2) a transition domain in the upper mantle is considered between the shallow mantle of the Variscan domain and the deep mantle beneath the East European Craton (EEC), extending from the Elbe Line in the south till the Tornquist Zone. The strain localizations observed along these structural contrasts strongly enhance the dominant role played by large structural domains in stiffening the propagation of tectonic deformation and in controlling the basin formation and the evolution in the CEBS.     

分布式光纤传感技术在滑坡监测中的应用

将分布式光纤传感技术引入滑坡监测,既可得到整个滑坡体的概要特征,又能提高监测效率。FBG与BOTDR是两种最具代表性的分布式光纤传感技术,FBG通过测量其反射光波长的变化获得应变或温度值。BOTDR通过测定后向布里渊散射光的频移实现分布式温度、应变测量。FBG传感器灵敏度高,但只能实现离散点的准分布式测量,BOTDR可实现分布式、长距离、不间断测量,但其空间分辨率不高。笔者提出FBG与BOTDR联合监测滑坡的方案。在巫山残联滑坡,在整个滑坡体上铺设监测光纤,利用BOTDR获得整个滑坡体的概要信息;在滑坡体变形的关键部位———变形缝安装FBG传感器,获得某些关键部位的应变信息,从而实现由点到线再到面的监测,获得滑坡体较完整的应变信息。     

三维地震属性参数在煤层厚度预测中的应用

依托“西部煤炭资源高精度三维地震勘探技术”项目工程,对晋城某矿南翼大巷东南区5m×5m×1ms的三维地震数据体,采用三维地震属性参数预测煤层厚度及其变化规律：沿3煤层、15煤层10ms时窗提取地震属性42种,根据钻孔资料,计算出煤厚与地震属性相关系数;从中优选出相关系数大于0．35的地震属性,其中3煤层9个、15煤层10个;然后进行地震属性互相关分析,优选出与3煤、15煤层厚度相关系数较大的4种属性,建立预测煤厚的BP神经网络模型,分别选取3煤层12个、15煤层4个实测数据作为学习训练和测试样本,以钻孔地震属性作为学习样本,对网络进行训练,最终获得全区煤层厚度。经与预留钻孔成果资料对比,预测精度较高,结果可用。     

松辽盆地宋芳屯油田扶杨油层孔隙结构及其影响因素

通过镜下观察,宋芳屯油田扶杨油层孔隙类型较多,以粒间孔为主。细管压力曲线上看,曲线较陡,分选差,孔隙结构特征参数总体上较差,与孔隙度、渗透率有一定的关系,大的孔隙对渗透率的贡献最大。扶杨油层的孔隙结构较复杂主要由于成岩作用影响,压实作用使孔隙空间显著缩小,胶结作用和自生粘土矿物生长使孔隙进一步缩小和复杂化,后期的溶蚀作用使孔隙空间增加。     

Changing grading of soil: effect on critical states

Examples of situations are presented where the grading of a soil changes during its lifetime either by crushing of particles leading to an increase of fine material or by slow transport of fine particles with seepage leading to a decrease of fine material. Such grading changes influence the basic constitutive properties of the soil, in particular properties such as critical states which are dependent on the available range of densities of packing. Discrete element modelling is used to show the dependence of critical state conditions on grading and the way in which the particle assembly seeks out new critical state conditions as the grading changes.     

Generalized ‘dependencies’ and parameter variance

The autodependence, (a special case of the — now quite obsolete — dependences, which had been introduced for very specialized astrometric purposes) is proportional to the parameter variance which is the expectation of the variance of the systematic error of a function evaluated with estimated parameters.     

地震学定量预报指标的一种提取方法——对比筛选法

鉴于目前地震学综合定量预报指标的缺乏和预报工作的急需,尝试使用“对比筛选法(简称CSM方法)”进行地震学定量预报指标的提取试验。较之以往作法的进展在于:1.同时使用“有震”和“无震”两类样本对比筛选;2.对不同地区的地震学参数进行了归一化处理。这样做的显著优点是:1.可以较有效地提取“有震异常”和“正常变化”指标;2.提取的异常和预报指标具有定量化和普适性特点。 试验研究使用大华北地震区资料,研究对象取中强地震。经内符和外推检验,证明该方法提取的异常和预报指标有效性和实用性较高。     

Strain analysis in Jurassic argillites of the Monte Sirino area (Lagonegro Zone,southern Apennines,Italy) and implications for deformation paths in pelitic rocks

Analysis of strain in Jurassic argillites forming part of the folded and thrusted sedimentary succession of the Lagonegro basin (southern Italian Apennines) has been carried out using ellipsoid-shaped reduction spots as strain markers. Most of the determined finite strain ellipsoids are of oblate type and show a peculiar distribution of the maximum extension direction (X), with maxima either subparallel or subperpendicular to the local fold axes. Using the strain matrix method, two different deformation histories have been considered to assist the interpretation of the observed finite strain pattern. A first deformation history involved vertical compaction followed by horizontal shortening (occurring by a combination of true tectonic strain and volume loss), whereby all strain is coaxial and there is no change in the intermediate axis of the strain ellipsoid. By this type of deformation sequence, which produces a deformation path where total strain moves from the oblate to the prolate strain field and back to the oblate field, prolate strain ellipsoids can be generated and may be recorded where tectonic deformation has not been large enough to reverse pretectonic compaction. This type of deformation history may be of local importance within the study area (i.e. it may characterize some fold hinge regions) and, more generally, is probably of limited occurrence in deformed pelitic rocks. A second deformation sequence considered the superposition of pre-tectonic compaction and tectonic strain consisting of initial layer-parallel shortening followed by layer-parallel shear (related to flexural folding). Also in this instance, volume change during tectonic deformation and tectonic plane strain have been assumed. For geologically reasonable amounts of volume loss due to compaction and of initial layer-parallel shortening, this type of deformation history is capable of producing a deformation path entirely lying within the oblate strain field, but still characterized by a changeover, during deformation, of the maximum extension axis (X) from a position parallel to the fold axis to one perpendicular to it. This type of deformation sequence may explain the main strain features observed in the study area, where most of the measured finite strain ellipsoids, determined from the limb regions of flexural folds, display an oblate shape, irrespective of the orientation of their maximum extension direction (X) with respect to the local structural trends. More generally, this type of deformation history provides a mechanism to account for the predominance of oblate strains in deformed pelitic rocks.