激光测高数据辅助卫星成像几何模型精化处理

资源三号02星搭载了中国首个对地观测试验性激光测高载荷。借鉴目前较成熟的卫星影像区域网平差理论的基础上,结合近年来激光测高数据精度的大幅提升以及资源三号02星激光测高数据的特点,首次提出了激光测高数据辅助卫星立体影像进行成像几何模型精化处理的通用理论。首先,利用传统的区域网平差算法对所处理影像进行高精度连接点匹配处理,并对其进行无约束的自由网平差处理,获得高精度相对精度及不亚于原始成像几何模型的绝对精度;其次,根据激光测高数据3维坐标和精化后参考影像成像几何模型获取激光数据参考影像坐标;而后将参考影像坐标通过几何模型映射获取目标影像上待匹配影像坐标,通过连接点匹配算法,对待匹配目标影像坐标进行精化获取高精度像方同名点;最后,以同名点作为高程控制进行区域网平差计算,对影像成像几何模型进一步处理,获取高精度补偿参数。通过湖北、青海两测区的试验,以激光测高数据辅助卫星影像几何模型精化精度可分别达到1.97 m、3.23 m,结果表明本文提出的方法可有效提高卫星立体数据测图精度。     

深反射地震成像揭示的班公湖 怒江缝合带中段Moho断阶及其大地构造意义

揭示班公湖- 怒江(班怒)缝合带Moho(莫霍面)结构对于认识中特提斯洋壳俯冲和南羌塘坳陷成因具有重要地球动力学意义。基于横跨班怒缝合带的深反射地震数据(88°30′E),本文采用了中长波长静校正、噪声压制、优化叠加和叠前深度偏移(PSDM)等地震处理技术,获得了深度域地震反射偏移剖面、层速度场和高分辨率Moho结构。由深度域剖面显示,班怒缝合带Moho位于地表以下65～80 km,呈不连续北向抬升趋势,指示在拉萨地块与南羌塘地块之间存在岩石圈上地幔断阶,最大阶步可达15 km。综合分析缝合带两侧的Moho形态认为,这些断阶受南侧拉萨地体的岩石圈上地幔以19. 5°北倾俯冲与北侧南羌塘地块的上地壳抬升驱动,可能与深部存在局部熔融相关。班怒缝合带下的Moho结构表明,随着晚侏罗世—早白垩世中特提斯洋闭合,南羌塘地体由边缘海沉积向前陆盆地转换,形成南羌塘坳陷。     

中国隧道及井巷地震波法超前探测技术研究分析

自20世纪90年代以来,反射地震波法作为一种主要的超前探测技术在我国国内隧道及井巷工程中取得了诸多成功应用的探测实例,同时在应用中不同探测方法也存在不少问题。文章结合国内外超前探测中应用较为广泛的TSP法、负视速度法、HSP法、TRT法、ISIS系统等反射波探测技术加以阐明,分析了国内超前探测技术应用与研究的现状,指出隧道及井巷超前探测数据采集与处理过程中存在的不足,并进一步提出超前探测研究在正反演理论、数据采集、偏移成像技术等方面应该注意的问题,超前探测的目标是要建立和完善一套实时的巷道前方地质体的动态监测与预报系统。     

无单元法用于地震波波动方程模拟与成像

波动方程方法是解决地震正反演问题的基本工具之一.无单元法作为一种新兴的偏微分方程数值计算方法,已经在材料力学、热传导等领域取得了显著的成功.由于抛弃了单元的概念及采用滑动最小二乘的拟合方法,使得无单元法具有前处理简单、精度高、独立变量解高次连续等优点.本文首先介绍无单元法求解波动方程的原理,指出影响其精度的主要因素.在算例的基础上详细讨论了无单元法用于实际波动问题的效果,并进一步尝试利用无单元法进行地震波数值模拟和反演成像的研究.模型计算的结果表明,无单元法能够较好的处理地震模拟和成像问题,精度和稳定性是令人满意的.     

几种电法仪器在地质勘查中的应用

文章介绍了几类物探电法仪器的工作原理、技术特点和适用范围,强调了物探资料的合理解释必须与地质认识相结合的重要性,物探工作要做实做细,对物探原始资料要选择合理的方法与参量进行计算处理,结合一些具体的勘测实例,说明各种方法的有效性及其实际应用效果.     

Inter-comparison of remote sensing platforms for height estimation of mango and avocado tree crowns

To support the adoption of precision agricultural practices in horticultural tree crops, prior research has investigated the relationship between crop vigour (height, canopy density, health) as measured by remote sensing technologies, to fruit quality, yield and pruning requirements. However, few studies have compared the accuracy of different remote sensing technologies for the estimation of tree height. In this study, we evaluated the accuracy, flexibility, aerial coverage and limitations of five techniques to measure the height of two types of horticultural tree crops, mango and avocado trees. Canopy height estimates from Terrestrial Laser Scanning (TLS) were used as a reference dataset against height estimates from Airborne Laser Scanning (ALS) data, WorldView-3 (WV-3) stereo imagery, Unmanned Aerial Vehicle (UAV) based RGB and multi-spectral imagery, and field measurements. Overall, imagery obtained from the UAV platform were found to provide tree height measurement comparable to that from the TLS (R² = 0.89, RMSE = 0.19 m and rRMSE = 5.37 % for mango trees; R² = 0.81, RMSE = 0.42 m and rRMSE = 4.75 % for avocado trees), although coverage area is limited to 1–10 km² due to battery life and line-of-sight flight regulations. The ALS data also achieved reasonable accuracy for both mango and avocado trees (R² = 0.67, RMSE = 0.24 m and rRMSE = 7.39 % for mango trees; R² = 0.63, RMSE = 0.43 m and rRMSE = 5.04 % for avocado trees), providing both optimal point density and flight altitude, and therefore offers an effective platform for large areas (10 km²–100 km²). However, cost and availability of ALS data is a consideration. WV-3 stereo imagery produced the lowest accuracies for both tree crops (R² = 0.50, RMSE = 0.84 m and rRMSE = 32.64 % for mango trees; R² = 0.45, RMSE = 0.74 m and rRMSE = 8.51 % for avocado trees) when compared to other remote sensing platforms, but may still present a viable option due to cost and commercial availability when large area coverage is required. This research provides industries and growers with valuable information on how to select the most appropriate approach and the optimal parameters for each remote sensing platform to assess canopy height for mango and avocado trees.     

资源三号和天绘一号卫星影像无控联合平差精度分析

近年来国产卫星传感器类型日益丰富,使用自主可控的国产卫星影像进行生产和研究的需求越来越大,多源国产卫星影像联合平差的精度分析显得尤为重要。本文针对在立体测图生产中,资源三号卫星影像在时相较旧、噪声较大、云覆盖和摄影漏洞等特殊困难的条件下,利用天绘一号卫星影像进行补漏生产的情况,最终分析并验证了两者无控联合平差的可行性和成果精度。     

中分辨率成像光谱仪数据的滩涂环境遥感应用能力研究

以长江口海岸带地区为示范区，探讨了我国中分辨率成像光谱仪(CMODIS)的滩涂及水体图像特征。结合地面现场观测和图像处理结果，评价了其在滩涂环境遥感中的应用能力。     

Research on the Application of Fast-steering Mirror in Stellar Interferometers

In stellar interferometers, the fast-steering mirror (FSM) is widely utilized to correct the wavefront tilt caused by the atmospheric turbulence and internal instrumental vibration, because of its high resolution and fast response frequency. In this study, the non-coplanar error between the FSM and the actuator deflection axis introduced by the manufacturing, assembly, and adjustment is analyzed systematically. Via a numerical method, the additional optical path difference (OPD) caused by the above factors is studied, and its effect on the fringe tracking accuracy of a stellar interferometer is also discussed. On the other hand, the starlight parallelism between the beams of two arms is one of the main factors for the loss of fringe visibility. By analyzing the influence of wavefront tilt caused by the atmospheric turbulence on fringe visibility, a simple and efficient real-time correction scheme of starlight parallelism is proposed based on a single array detector. The feasibility of this scheme is demonstrated by a laboratory experiment. The results show that after the correction of fast-steering mirror, the starlight parallelism meets preliminarily the requirement of a stellar interferometer on the wavefront tilt.     

折射/谐衍射红外双波段成像光谱仪系统研究

为了获取足够的目标信息,充分利用中波红外和长波红外的光谱信息,建立了谐衍射中、长波红外超光谱成像系统.利用谐衍射元件独特的色散特性,将谐衍射透镜应用于中、长波红外超光谱成像系统中,使系统在中波红外3.7—4.8 μm和长波红外8—12 μm的2个红外大气窗口内获取数百个光谱图像.设计结果表明,中波红外波段,在18对线/mm处光学系统的调制传递函数(MTF)大于0.55;长波红外波段,在13对线/mm处光学系统的MTF大于0.5;光学系统的衍射环绕能,在中波红外波段30 μm半径范围内大于85%,在长波红外