三峡库区巴东县城附近主要滑坡边界轨迹分形分维特征与滑坡稳定性关系

为了探索复杂滑坡轨迹结构演化及其稳定性定量分析计算的新途径，本文利用分形分维理论，分析三峡库区巴东县城附近滑坡边界轨迹的几何分形结构，并采用盒维数法分别求得巴东县城附近11个滑坡边界轨迹的分维值，计算结果表明：每个滑坡的轨迹结构具有其特征性的分维值，轨迹结构越复杂，结构层次越清楚，分维值越高；其中，榨房坪滑坡和黄腊石滑坡的分维值最高，分别为1.50和1.483，西壤口和谭家湾滑坡的分维值最低，分别为0.925和0.732；而黄土坡和赵树岭滑坡的分维值介于二者之间，分别为1.111和1.091。结合典型滑坡边界轨迹结构演化与滑坡稳定性关系的定性分析及前期滑坡稳定性定量计算和模拟分析，初步揭示：滑坡边界轨迹结构与稳定性是密切相关的，滑坡边界轨迹宏观扩展增值越明显，轨迹结构越复杂，分维值越高，其稳定性条件也越差，因此，分数维可作为衡量滑坡轨迹结构复杂性和稳定性的重要标志；滑坡边界轨迹宏观扩展变形存在一个极限，超过这个极限滑坡的局部失稳就转化为整体滑动；而滑坡边界轨迹则记录了滑坡变形扩展现象和信息，因此，相对应地滑坡轨迹分形结构的分维值也应存在一个极值，在极值点滑坡体处于临滑状态；滑坡边界轨迹结构的极限分维值大致为1.4～1.5，此时滑坡接近于整体极限失稳状态，而分维值在1.1～1.3之间则表示滑坡处于整体稳定，局部存在潜在失稳状态，分维值小于1则表示滑坡处于相对稳定状态。     

Analysis of rock structure stability in coal mines

In this paper, the theory of limit point instability is used to analyse the stability of rock structures in coal mines. A general method of analysing stability of rock structures is put forward and a uniform instability condition of rock structures is set up. Some instability phenomena, such as rock bursts in circular roadways, pillars and long walls, and the outburst of coal and gas from circular roadways, are discussed analytically. At a later stage, the critical point of rock structure instability is determined. The influence of relative parameters (such as the mechanical properties of rock, coal, and the geometric sizes) on the stability of the rock structures is carefully analysed. Copyright © 2005 John Wiley & Sons, Ltd.     

利用卫星遥感资料反演感热和潜热通量的研究综述

区域平均感热和潜热通量是气象、水文、生态模式中的关键物理因子，卫星遥感反演为观测区域平均感热和潜热通量提供了可能。对利用卫星遥感资料反演地气通量的方法进行了总结和评述。首先描述了现在常用的反演方法，分析了方法中的各种假定对反演结果的影响，并对不同的模式反演结果进行了比较。还指出了评价卫星反演通量的精度时需要注意的问题。最后对该领域内现存的问题与发展方向进行探讨。     

Left upstream slope design for the Çatalan Dam, Adana, Turkey and its behaviour under actual earthquake loading

An investigation and remediation of instability along upstream cut slopes for an earthfill dam in differentially weathered rock in southern Turkey is described. The major instability problem was a 45-m high and 200-m long previously cut slope next to the main axis of the dam, above the diversion tunnels and water outlet structures. The slope was first designed and excavated in 1986 based on the temporary berm approach. Rising water level in the reservoir would change the shear strength parameters and the pore-water pressure in the slope; thus, probable deep failure would damage the entrance of the diversion tunnels and water outlet structures, as well as the earthfill embankment of the dam. In June 1996, the slope face was re-excavated and protected against wave erosion by placement of a layer of rock riprap over a layer of bedding and a filter material. A strong earthquake (M_S = 6.2) occurred during a period of rapid drawdown in 27 June 1998. The slope remained stable, although numerous tension cracks developed in Quaternary terrace deposits near the reservoir area.     

生态足迹模型在山区生态可持续评价中的初步应用--以1999年北京西部山区为例

在剖析生态足迹分析法的理论基础上，进一步考虑不同消费水平对生态足迹时空变异的影响，划分农村居民和城镇居民两类不同的消费群体，分别计算各自的生态足迹，其次进一步细化模型中人均水资源足迹，从而构建生态足迹与生态容量平衡模型。根据平衡模型计算出生态盈亏，得出区域生态持续性评价结果。并以1999年北京西部山区门头沟区为例，进行模型计算和生态可持续评价，结果表明1999年门头沟区处于生态赤字状态，说明该区生态系统处于不可持续状态。在对门头沟区的初步研究基础上，指出生态足迹作为山区生态可持续评价指标的优点及当前存在的缺点。     

Liquefaction potential evaluations by energy-based method and stress-based method for various ground motions

An energy-based liquefaction potential evaluation method (EBM) previously developed was applied to a uniform sand model shaken by seismic motions recorded at different sites during different magnitude earthquakes. It was also applied to actual liquefaction case histories in Urayasu city during the 2011 M9.0 Tohoku earthquake and in Tanno-cho during the 2003 M8.0 Tokachi-oki earthquake. In all these evaluations, the results were compared with those by the currently used stress-based method (SBM) under exactly the same seismic and geotechnical conditions. It was found that EBM yields similar results with SBM for several ground motions of recent earthquakes but has easier applicability without considering associated parameters. In Urayasu city, the two methods yielded nearly consistent results by using an appropriate coefficient in SBM for the M9.0 earthquake, though both overestimated the actual liquefaction performance, probably because effects of plasticity and aging on in situ liquefaction strength were not taken into account. In Tanno-cho, EBM could evaluate actual liquefaction performance due to a small-acceleration motion during a far-field large magnitude earthquake while SBM could not.     

An adaptive finite element model for wellbore breakout simulation

A finite element formulation is proposed and implemented for analysing the stability of excavated wells using the DiMaggio-Sandler constitutive elastoplastic model with a typical carbonate reservoir configuration. The quality of the finite element approximation is ensured by applying smooth curved elements adapted to the wellbore geometry, and h − p adaptive finite element meshes in the plastic zone. General purpose procedures are defined to transfer the elastoplastic deformation history to newly created integration points. A breakout damage criterion is proposed based on the second invariant of the deviatoric plastic deformation tensor. This damage criterion is used to apply a mesh movement algorithm to represent material collapse. The automatic successive application of the breakout damage criterion results in elliptical realistically looking geometries obtained in experiments reported in the literature.     

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.     

Numerical simulation of agricultural sediment and pesticide runoff: RZWQM and PRZM comparison

Agricultural sediment and pesticide runoff is a widespread ecological and human health concern. Numerical simulation models, such as Root Zone Water Quality Model (RZWQM) and Pesticide Root Zone Model (PRZM), have been increasingly used to quantify off‐site agricultural pollutant movement. However, RZWQM has been criticized for its inability to simulate sedimentation processes. The recent incorporation of the sedimentation module of Groundwater Loading Effects of Agricultural Management Systems has enabled RZWQM to simulate sediment and sediment‐associated pesticides. This study compares the sediment and pesticide transport simulation performance of the newly released RZWQM and PRZM using runoff data from 2 alfalfa fields in Davis, California. A composite metric (based on coefficient of determination, Nash–Sutcliffe efficiency, index of agreement, and percent bias) was developed and employed to ensure robust, comprehensive assessment of model performance. Results showed that surface water runoff was predicted reasonably well (absolute percent bias <31%) by RZWQM and PRZM after adjusting important hydrologic parameters. Even after calibration, underestimation bias (?89% ≤ PBIAS  ≤ ?36%) for sediment yield was observed in both models. This might be attributed to PRZM's incorrect distribution of input water and uncertainty in RZWQM's runoff erosivity coefficient. Moreover, the underestimation of sediment might be less if the origin of measured sediment was considered. Chlorpyrifos losses were simulated with reasonable accuracy especially for Field A (absolute PBIAS  ≤ 22%), whereas diuron losses were underestimated to a great extent (?98% ≤ PBIAS  ≤ ?65%) in both models. This could be attributed to the underprediction of herbicide concentration in the top soil due to the limitations of the instantaneous equilibrium sorption model as well as the high runoff potential of herbicide formulated as water‐dispersible granules. RZWQM and PRZM partitioned pesticides into the water and sediment phases similarly. According to model predictions, the majority of pesticide loads were carried via the water phase. On the basis of this study, both RZWQM and PRZM performed well in predicting runoff that carried highly adsorptive pesticides on an event basis, although the more physically based RZWQM is recommended when field‐measured soil hydraulic properties are available.