评价生物气生成量、生成期的元素平衡法及其应用

生物气的生成期对其成藏有至关重要的制约作用,但目前国内外尚缺少可信、有效方法来对此进行评价。针对这一难题,考虑到无论生物气的生成机理如何,都是一个有机元素之间的物质平衡过程,文章探索并建立了评价生物气生成量的元素平衡法,并利用松辽盆地大量的实际分析数据,对这一评价方法(模型)进行了标定和应用。结果表明,松辽盆地生物气的生成可能主要发生在800m以浅的埋深条件下;区内源岩生物气的生成量约为285.0×1012m3;生物气的主要生成期在嫩江组沉积末期之前。     

合肥市膨胀土试验研究

主要介绍合肥市二环路用生石灰,石膏改良膨胀土的室内试验研究,并根据试验资料说明生石灰、石膏改良膨胀土的效果。同时提出一种用生石灰一石膏改良合肥膨胀土的最佳配方。大量的试验结果表明,用该配方改良后的膨胀土其单轴抗压强度,水中稳定性、耐久性都有显著提高。经十几年来在合肥市二环路上应用效果良好。     

济宁颜店铁矿地质特征及济宁岩群含矿性研究

伏于济宁滋阳山一带千米盖层之下的古元古代济宁岩群是一套低绿片岩相变质含铁岩系,主要岩石组合为千枚岩、板岩、磁铁石英岩等,其原岩为海相含灰质泥岩、砂岩类中酸性火山岩、硅铁岩等,该套岩系最大控制厚度达580m。其中赋存的条带状磁铁石英岩呈层状、似层状埋深在1612．89～1796．54m之间,共有5层铁矿,总厚度85．53m。估算预测的铁矿资源量（334）9．76亿t,mFe平均品位22．37％;低品位矿体预测的资源量（334）2．64亿t,mFe平均品位16．99％。     

山西省基础地理信息数据库的技术研究

山西省基础地理信息数据库是山西省空间数据基础设施建设的重要组成部分,主要介绍数据库建设的技术方案和关键技术.     

矿区控制网布网方案的选择

用计算机模拟法,讨论了控制网不同观测量的平差结果,提出了选择矿区控制网方案的原则.     

印度洋岸边某电站工程的岩土工程问题初探

从海岸地带的地理地质环境入手,针对燃煤电站工程的特点,就工程建设中的几个主要岩土工程问题,分析探讨了其成因、特点和对工程建设的制约与影响程度．提出了解决这些问题的对策和建议。     

高地震区公路隧道地震动力响应分析

基于土一结构相互作用理论,对高地震区一实际重大工程的公路隧道洞口段结构进行了抗震计算,得到了衬砌结构各控制点的位移、加速度及内力响应规律。结果表明：在人工合成地震波条件下,衬砌墙脚、拱腰为抗震薄弱位置;结构的加速度波形与输入波形相似;这些结果为抗震设计提供了一些依据。     

Numerical simulation of migration–accumulation of oil resources

Numerical simulation of oil migration and accumulation is to describe the history of oil migration and accumulation in basin evolution. It is of great value to the evaluation of oil resources and to the determination of the location and amount of oil deposits. This thesis discusses the characteristics of petroleum geology and permeation fluid mechanics. For the three-dimensional problems of Dongying hollow of Shengli Petroleum Oil Field, it puts forward a new model and a kind of modified method of upwind finite difference fractional steps implicit interactive scheme. For the famous hydraulic experiment of secondary migration–accumulation, the numerical simulation test has been done, and both the computational and experimental results are basically identical. For the actual problem of Dongying hollow, the numerical simulation test and the actual conditions are basically coincident. Thus, the well-known problem has been solved.     

New basin modelling results from the Polish part of the Central European Basin system: implications for the Late Cretaceous–Early Paleogene structural inversion

Combined subsidence and thermal 1D modelling was performed on six well-sections located in the north-western Mid-Polish Trough/Swell in the eastern part of the Central European Basin system. The modelling allowed constraining quantitatively both the Mesozoic subsidence and the magnitude of the Late Cretaceous–Paleocene inversion and erosion. The latter most probably reached 2,400 m in the Mid-Polish Swell area. The modelled Upper Cretaceous thickness did not exceed 500 m, and probably corresponded to 200–300 m in the swell area as compared with more than 2,000 m in the adjacent non-inverted part of the basin. Such Upper Cretaceous thickness pattern implies early onset of inversion processes, probably in the Late Turonian or Coniacian. Our modelling, coupled with previous results of stratigraphic and seismic studies, demonstrates that the relatively low sedimentation rates in the inverted part of the basin during the Late Cretaceous were the net result of several discrete pulses of non-deposition and/or erosion that were progressively more pronounced towards the trough axis. The last phase of inversion started in the Late Maastrichtian and was responsible for the total amount of erosion, which removed also the reduced Upper Cretaceous deposits. According to our modelling results, a Late Cretaceous heat-flow regime which is similar to the present-day conditions (about 50 mW/m²) was responsible for the observed organic maturity of the Permian-Mesozoic rocks. This conclusion does not affect the possibility of Late Carboniferous–Permian and Late Permian–Early Triassic thermal events.