Appropriate Spatial Sampling of Rainfall or Flow Simulation/Echantillonnage Spatial de la Pluie Approprié pour la Simulation D'écoulements

Abstract

The objective of this study is to find the appropriate number and location of raingauges for a river basin for flow simulation by using statistical analyses and hydrological modelling. First, a statistical method is used to identify the appropriate number of raingauges. Herein the effect of the number of raingauges on the cross-correlation coefficient between areally averaged rainfall and discharge is investigated. Second, a lumped HBV model is used to investigate the effect of the number of raingauges on hydrological modelling performance. The Qingjiang River basin with 26 raingauges in China is used for a case study. The results show that both cross-correlation coefficient and modelling performance increase hyperbolically, and level off after five raingauges (therefore identified to be the appropriate number of rain-gauges) for this basin. The geographical locations of raingauges which give the best and worst hydrological modelling performance are identified, which shows that there is a strong dependence on the local geographical and climatic patterns.     

Spatial–temporal variability and hydrologic connectivity of runoff generation areas in a North Alabama pasture—implications for phosphorus transport

This study delineated spatially and temporally variable runoff generation areas in the Sand Mountain region pasture of North Alabama under natural rainfall conditions, and demonstrated that hydrologic connectivity is important for generating hillslope response when infiltration‐excess (IE) runoff mechanism dominates. Data from six rainfall events (13·7–32·3 mm) on an intensively instrumented pasture hillslope (0·12 ha) were analysed. Analysis of data from surface runoff sensors, tipping bucket rain gauge and HS‐flume demonstrated spatial and temporal variability in runoff generation areas. Results showed that the maximum runoff generation area, which contributed to runoff at the outlet of the hillslope, varied between 67 and 100%. Furthermore, because IE was the main runoff generation mechanism on the hillslope, the data showed that as the rainfall intensity changed during a rainfall event, the runoff generation areas expanded or contracted. During rainfall events with high‐intensity short‐ to medium‐duration, 4–8% of total rainfall was converted to runoff at the outlet. Rainfall events with medium‐ to low‐intensity, medium‐duration were found less likely to generate runoff at the outlet. In situ soil hydraulic conductivity (k) was measured across the hillslope, which confirmed its effect on hydrologic connectivity of runoff generation areas. Combined surface runoff sensor and k‐interpolated data clearly showed that during a rainfall event, lower k areas generate runoff first, and then, depending on rainfall intensity, runoff at the outlet is generated by hydrologically connected areas. It was concluded that in IE‐runoff‐dominated areas, rainfall intensity and k can explain hydrologic response. The study demonstrated that only connected areas of low k values generate surface runoff during high‐intensity rainfall events. Identification of these areas would serve as an important foundation for controlling nonpoint source pollutant transport, especially phosphorus. The best management practices can be developed and implemented to reduce transport of phosphorus from these hydrologically connected areas. Copyright © 2009 John Wiley & Sons, Ltd.     

Estimating the crush zone size under a cutting tool in coal

Summary As part of an effort to understand the mechanics of fine fragment formation in coal, which is important in studies of respirable dust due to mining, fracture toughness measurements and the strain energy density (SED) theory were applied to calculate the crush zone size under a cutting tool in coal. This zone is the major source of fine fragments in the 1 to 10 µm size range. The model used in these calculations is a boundary element program containing a failure criterion based on the SED theory. The boundary element program calculates linear elastic stresses at numerous points in the coal material ahead of a cutting bit. These stresses are then input to a subroutine called critical flaw length and orientation (CFLO) which uses the SED theory to determine the CFLO for a small crack at the boundary element stress computation point. The extent of crushing is based on earlier postulates about the role of inherent flaws in a fragmentation process. To form 1 to 10 µm fragments requires firstly a local stress strong enough to activate flaws with a characteristic length less than 1 to 10 µm and secondly, a flaw density sufficient to provide an average spacing between flaws also on the order of 1 to 10 µm. The locus of active 10 µm flaws represents the maximum possible extent of fine fragmentation in the 10 µm or less size range assuming that a sufficient inherent flaw density exists. The approach offers a first order approximation to the extent of crushing under a tool tip. The size and shape of the crush zone volume is affected by the attack angle and geometry of the tool.     

A garnet population in Yellowknife schist, Canada

Abstract Data are presented on a garnet population in a specimen of garnet-biotite-plagioclase-quartz schist from the cordierite zone of an Archaean thermal dome in the Southern Slave Province of the Canadian Shield. Garnet crystals are bounded by planar dodecahedral faces and by trapezohedral faces which on the 10-μm scale are corrugated. Crystal distribution, as revealed by dissection of a small cubic volume of rock, is random. The size distribution is normal, with a mean diameter of 0.81 mm and a standard deviation of 0.32 mm. In the largest crystal of the population (mean radius 0.83 mm), [Mn] = 100 Mn/(Fe + Mg + Mn + Ca) decreases from 14.5 at the centre to 7.5 and then increases in the outer margin to 8.5; [Fe] increases continuously from 67 at the centre to 77 at the surface; [Mg] increases from 12.5 to 13.5 and then falls sharply to 11; [Ca] remains unchanged at 4.0 and then drops to 3.3. Progressively smaller crystals have progressively lower [Mn] and higher [Fe] concentrations at their centres, while all crystals have the same margin composition. Growth vectors extending from given concentration contours to crystal surfaces are of equal length regardless of the size of the crystal in which the vector is located. A garnet-forming model is presented in which reaction was initiated by a rise in temperature. Nucleation sites were randomly selected. The nucleation rate increased with time and then declined. Crystal faces advanced at a constant linear rate, which implies an increase in volume proportional to surface area. Initially, the composition of garnet deposited on crystal surfaces was determined by van Laar equations of equilibrium, which demanded the withdrawal of Mn and Fe from within chlorite crystals. This transfer reaction was then accompanied by an ion exchange reaction which moved Mn and Fe to garnet surfaces from biotite, in exchange for Mg. The exchange reaction provides an explanation for the high overall concentration of Mn and Fe in garnet and for the observed Mn and Mg reversals in the margins of crystals. The increase of garnet volume in the garnet population is found to be parabolic, i.e. Vαα⁵.     

行业空间配置的线性对偶模式

本文研究诸如钢铁、有色金属、基本化工等一类行业的空间配置。由于韦勃、廖施的理论的一些前提条件在这里不存在，使得他们的研究方法显得十分不足。本文作者建立了具有对偶的线性规划模式来解决这类行业的空间配置。这一对模式的解给出了具有最小行业总成本的配置方案和与之相应的产品和原料在各个区位的影子价格。尤其是作者依据空间价格均衡找出了原模式与对偶模式的解之间的关系，这些关系是行业空间配置优化的效率条件。     

Farming ‘practice’ as temporally and spatially situated intersections of biography,culture and social structure

This paper brings anthropological, sociological and geographical perspectives to bear on the problem of farm sustainability and, in particular, the legitimation of sustainable farm practices. It attempts to lay some theoretical foundations for explanation of the adoption of farming practices which may, or may not, promote sustainability. A brief survey of the literature surrounding these issues finds many of the current theoretical perspectives incapable of fully accounting for the complexity of farming practice. Reductionist decision/rational‐action models, in particular, are found wanting for their lack of both cultural consistency and social/spatial specificity. Instead, this paper promotes a generative structuralist approach directed towards an analysis of social and economic practice in lived space; that is, firmly anchored in long‐term ethnographic research.     

Issues of Spatial and Temporal Variability in Climate Impact Studies

The accuracy of impact estimates relating climate change to regional-scale agricultural production is constrained by the temporal and spatial resolution of climate change projections. Several techniques have been used to compensate for these limitations in order to provide reasonable estimates of the impact of climate change on crop yield. One approach assumes that variability over time can substitute for spatial variability, thereby reducing the need to estimate the impacts at a spatially dense network of stations—an assumption that has not been generally tested. This study evaluates this assumption using methods similar to those employed in the climate impact literature. The findings suggest that current practices are generally defensible if the goal is to provide a range of possible crop responses to climate change. However, the results also show that the assumption is highly sensitive to specific interactions at the soil-plant-atmosphere interface and, consequently, does not hold under certain circumstances.     

Koreatown and Korean Small Firms in Los Angeles: Locating in the Ethnic Neighborhoods*

The locations of Korean firms in Los Angeles reflect spatial segmentation in markets and the provision of labor, in that the ethnic neighborhoods facilitate positive business environments for ethnic small firms. While Korean small businesses serve both community needs and broader local markets, firm locations are closely associated with the residential patterns of some ethnic populations. To address the specificity of firm locations, this paper examines Koreatown using historical sources and recent property development, identifies changes in the locational patterns of Korean firms between 1975 and 1986, and analyzes relationships between business density and density of ethnic populations for zip code areas. The findings of this study indicate that both the development of Koreatown and the presence of ethnic neighborhoods are important influences on the location of Korean businesses.