Growth Aspects and Magnesium Carbonate Concentrations of the Reef Building Octocoral Heliopora coerulea (Pallas) after Transplantation

Abstract. An experiment to test C have's hypothesis on temperature dependent MgCO₃ concentrations in marine calcareous skeletons was undertaken by transplanting colonies of Heliopora coerulea. The corals were transferred from a shallow lagoon with high average temperatures to the outer bottom of a fringing reef, 16 m depth, with low average temperatures. Against expectation, a statistically significant increase of average mol % concentrations from 0.48 to 0.54 % for upper growth regions and from 0.49 to 0.62% for lower growth regions was obtained. Temperature records during the experimentation period and the above data indicate that the mol% MgCO₃ concentration in the skeleton of living Heliopora colonies increases when transplanted to an environment with a lower temperature average than that of their original growth site, and with seasonal temperature fluctuations which are smaller in the experimental site than in the control site. Temperature fluctuations at the control site were up to 2.5 times greater than at the experimental site for most of the observation months. This supports the conclusion that the parameters a) minimum temperature and b) temperature stability of the environment are essential for the incorporation of Mg into the carbonate skeleton matrix of marine organisms. Within this study the results of a quantitative chemical analysis of the carbonate skeleton of H. coerulea are presented and growth data of transplanted colonies compared with those from the control site.     

Oviraptorosaurian Eggs (Dinosauria) with Embryonic Skeletons Discovered for the First Time in China

Two elongatoolithid dinosaur eggs from the Upper Cretaceous of Ganzhou, Jiangxi Province and the embryonic skeletons they bear are described. They represent the first oviraptorosaurian eggs with embryonic skeletons in China and provide the first example that an oospecies can be correlated to certain dinosaur taxon/taxa. The two eggs are the same as the pair of the eggs inside a female oviraptorosaurian pelvis from the same horizon of the same area in both macro- and micro-structures of the egg shells, and can he referred to the oospecies, Macroolithus yaotunensis Zhao, 1975. The morphology of the preserved part of the embryonic skeletons indicates that they may have been laid by an oviraptorid, Heyuannia huangi from Guangdong Province or a closely related oviraptorosaurian, which may have been lived in the Ganzhou area too in the Late Cretaceous. The embryonic skeletons of the two eggs are not in the same developing stage. In one of the eggs, the postzygapophysis of the preserved vertebrae are well ossified, indicating that it was just hatched.     

二长棘鲷和黄鳍鲷骨骼系统的比较

对二长棘鲷和黄鳍鲷的骨骼系统进行了比较研究。结果表明,二长棘鲷脑颅中的上筛骨、侧筛骨、额骨、眶下骨、蝶耳骨、上枕骨,咽颅中的前上额骨、腭骨、舌额骨、齿骨、鳃盖骨、尾舌骨、咽鳃骨等与黄鳍鲷相应部分的骨骼有明显差异,某些特征可作属间或种间的鉴别依据。     

非线性土层地震反应分析的一种方法

本文利用作者给出的土的剪切动力本构关系的动态骨架曲线模型,结合显式差分数值逐步积分方法,给出了一种分析非线性土层地震反应的方法。反应计算中,地震效应视为基底剪切波垂直入射,且考虑了上部土层中能量向弹性基底辐射的效应。文章最后给出了本方法应用的一个算例,并给出了相应的等效线性化方法的计算结果。     

不同轴压比RCS梁柱组合件恢复力模型研究

以6个1/2模型RCS梁柱节点拟静力试验为基础,研究不同轴压比下RCS组合件的滞回性能。试验结果表明:梁铰破坏时试件的滞回曲线饱满,耗能能力优于构造破坏;随着轴压比的增大,试件滞回环愈加丰满,初始刚度有所增加,承载力有所增大;随着加载位移的增加,刚度退化速率变慢,且梁铰破坏时随着轴压比增大,刚度退化速率变大。基于试验结果和现有恢复力模型理论,建立的三折线骨架曲线模型与实际试验骨架曲线具有较高的吻合度,能较好的反映轴压比对其滞回特性的影响,可为该RCS梁柱组合件的弹塑性分析及工程应用提供参考。     

1：5万地形图框架数据质量影响因素分析

数据质量成因分析是地图数据质量控制的一项基础性的工作，只有找出产生误差的原因才能提出控制质量方法。本文介绍了1：5万框架图数据生产的基本情况，详细分析了产生框架图数据误差的诸多原因，认为地图数据质量与生产模式、生产条件、技术准备、作业环境、生产资料、技术培训、软件系统、作业人员等多种因素有关。     

激光雷达点云树木建模研究进展与展望

三维树木几何模型是数字城市与数字林业工程的重要组成部分.针对点云树木建模,深入分析了基于广义(泛在)激光雷达点云的树木模型重建方法,提出了聚类思想建模、图论方法建模、先验假设建模、拉普拉斯算子建模与轻量化表达建模5类建模体系,归纳总结了不同建模体系在树冠枝干的细节表达、建模算法性能、树木模型的多层次细节表达、建模体系综...     

基于图形分割的面状符号自动填充算法

针对现有制图软件在面状符号填充方面存在的符号缺失、压盖等问题,提出了一种基于图形分割的面状符号自动填充算法.该算法通过计算面的骨架线,对复杂面进行分解,判断分解后的简单面的形状,分别赋予不同的制图表达规则,实现面状符号的自动填充.结果表明,该算法可以有效实现狭长以及包含狭长分支的不规则图形的合理填充,有效解决了填充符号...     

一种基于Delaunay三角网的栅格线划矢量化方法

提出了一种基于Delaunay三角网的栅格线划矢量化方法。通过运用Delaunay三角网对栅格线划要素进行空间剖分,并根据单个Delaunay三角形的形状特征,提取线划要素骨架线。以栅格地图预处理、线划要素实体识别、线划要素边缘点集生成、线划要素边缘点集Delaunay三角网生成,以及基于Delaunay三角形公共边中点追踪的线划要素骨架线提取为技术路线,详细介绍栅格线划矢量化的具体实现过程,并进行若干实验,以验证方法的准确性与时效性。