Optimization of grid-drilling using computer simulation

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.     

基于STC单片机的实验开发平台的设计

介绍了基于STC89C516RD＋单片机的实验开发平台的硬件电路设计、ISP编程、软件开发实例及系统的抗干扰措施.为帮助学生学习单片机技术,同时也为有经验者开发和调试产品打下基础.     

沉积物粒度分析在厦门市第四纪环境研究和地层划分对比中的应用

采用MS2000型激光粒度分析仪进行测试，利用计算机粒度分析软件对数据进行整理和计算，绘制出样品的频率曲线、概率累积曲线以及粒度众数位值曲线等图件并进行沉积环境分析。厦门地区第四纪环境演化经历了中更新世同安组(含泥中粗砂、含泥细中砂、砂为主)海积一冲积一更新统上部龙海组(含泥粗中砂、含泥细中砂、含泥粗砂、粗砂、细中砂、含细砾中粗砂、中细砂等)冲积一洪冲积一更新世上部东山组(砂、砂砾、含泥中粗砂、粗砂、泥质中细砂、细砂、中粗砂等)冲洪积及部分海积(粉砂、细粉砂、含碳质泥、粘土、淤泥质粘土、粉砂质粘土等)一全新世长乐组(粉砂，淤泥质粘土、粉砂质粘土、碳质粘土、含砂淤泥质粘土，粉砂质亚粘土、粉细砂亚粘土等)海湾沉积。在解释环境变化的同时，说明粒度变化曲线在一定程度上可以作为地层划分的依据之一，并以此对研究区地层进行了详细划分。     

桂东南宁潭岩体地质特征及其构造环境初探

宁潭岩体是由马田、亭子、陈冲、老虎头 4个单元组成的遭受了变形变质改造的花岗岩复式岩体。岩石学、岩石化学、地球化学特征反映该岩体属后碰撞强过铝花岗岩。其源区既包含有不成熟的富含长英质物质的特性 ,也有成熟的、富含粘土的特性。岩体的形成温度为 85 0～ 92 5℃ ,同位素年龄为 35 4～ 4 4 0Ma。可能是加里东期扬子板块与华夏板块碰撞后 ,在拉伸构造作用下岩浆底辟侵位而成     

资源环境领域的信息化与本土化

本文重点论述了资源环境领域的深层研究问题;同时提出用信息化推动现代化的观点,进而对地球信息科学与数字地球的战略进行了概要地分析。     

介质横向不均匀对震后地表位移场的影响

利用三维有限元模拟两层地球模型(包括弹性层和粘弹性层)介质的横向不均匀和断层错动的复杂性对震后地表位移场的影响，其数值结果包括弹性解和粘弹性解。结果表明，震后位移场的分布特征不仅与粘弹性层的流变特性有关，还与弹性层介质的剪切模量以及断层的同震错动有关。     

EM技术在我国水环境保护中的应用研究进展

对EM技术在我国水环境保护中的应用情况进行了综述,重点介绍了EM技术应用于废水处理领域的研究进展,同时还展望了将来的应用及研究前景.     

首都圈地区现今断层活动的数学模拟及地震危险性讨论

以首都圈地区现今活动断层上近２０年的位移测量资料为依据，用二维线弹性有限元对该区断层的活动特征进行了拟合，并结合有关资料讨论了该区的地震危险性。结果表明：１９７７－１９８６年间该区主压应力优势方位与华北较一致，约为Ｎ４５°－８０°Ｅ；１９８６－１９９０年其主压应力方向向北偏转，约为Ｎ５°－６０°Ｅ；１９９０年至现在其主压应力又向东偏转，角度大于第一阶段，约为Ｎ８０°－９５°Ｅ。该区的张家口－延庆一带近期有发生中强震的可能；丰镇－阳高－大同地区和凉城－古营盘地区应力较高，也应引起注意。     

Application of stress release models to historical earthquakes from North China

Univariate and multivariate stress release models are fitted to historical earthquake data from North China. It is shown that a better fit is obtained by treating separately the Eastern part of the region, including the North China Plain and Bohai Sea, and the Western part of the region, including the Ordos Plateau and its Eastern boundary. Further improvement is obtained by fitting the large events (M7.6) and smaller events in the Western region by different stress release models. The comparisons are made by computing the likelihoods of the fitted models and discounting the number of parameters used by Akaike's AIC criterion. The models are used to develop long-term risk scenarios for the East and West regions.     

RETRACTION: Numerical simulation of a wind-sand flow under different conditions of atmospheric stability

A theoretical model for wind‐sand flow is developed by considering the coupling between wind flow and sand particle motion, the latter subject to the Magnus effect, under different atmospheric stability conditions. Using this model, the characteristics of the wind‐sand flow are discussed in detail. The results show that the atmospheric stability and the Magnus effect both have a strong influence on wind profiles and on the trajectories of sand particles. This approach produces results with characteristics that differ from those previously reported; the latter only applying to atmospheric conditions of neutral stability. The saltating sand reaches a greater height under non‐neutral stability than under neutral stability, while the maximum horizontal distance is greater under unstable conditions and is smaller under stable conditions than under conditions of neutral stability.