用单纯形法和PTD法对2016年新疆阿克陶M_S6.7地震序列的震源深度测定分析

用单纯形法计算了阿克陶M_S6.7主震的震源深度,结果为7.5 km,但单纯形法对设定的初始深度依赖值过高,震源深度值不一定可靠。用PTD法计算了阿克陶M_S6.7主震的震源深度,结果为9.4 km,且用了44个台站的震相数据共组成99个有效样本数参与了计算,不仅样本数多,而且震源深度样本数的集中度也比较符合高斯分布的特征,所以震源深度值可信度高,也非常接近国内和国外地震研究机构给出的此次地震的震源深度。当主震的震源深度已知且适合单纯形法设定的初值时,用单纯形法来计算地震序列的震源深度,不仅残差小,而且软件实现简单,确保了地震序列的按时提交。再用PTD法来检验该地震序列震源深度的准确性,结果显示,2种方法得到的震源深度差值不超过10 km,符合中国地震台网对震源深度误差的要求。     

新疆及周缘构造破裂特征及地震序列类型

横亘新疆境内的天山及其周边的西昆仑、阿尔金和阿尔泰是中国大陆著名的强构造运动区和地震活动带。在对新疆构造区应力环境、动力过程、断层运动变形特征和地震序列分析讨论的基础上,对新疆及其周缘主要构造区地震破裂方式和序列类型进行研究,得出如下结论:(1)西昆仑构造区受来自青藏块体和塔里木块体NS和NW向水平压应力和垂向力的作用,构造运动呈现出走滑与逆冲特征,震源破裂以走滑型为主,数量较少的逆断型地震主要分布在西昆仑帕米尔一侧的深震挤压区,正断型地震主要出现在西昆仑与阿尔金交汇的拉张盆地及附近。该区主余型地震占63%,6级以上地震序列也存在多震类型。(2)阿尔金断裂带位于西昆仑北缘断裂和北祁连断裂过渡带,受青藏块体向北和向西的推挤,断裂本身的左旋位移量通过两端逆冲挤压而转化,使得青藏高原北边界不断向外扩展。在此力源下,阿尔金断裂带震源破裂以走滑为主,也有少量的逆冲型地震。地震序列中主余型和孤立型地震占比相同(占44%)。(3)在印度板块和亚欧大陆碰撞效应影响下,天山地区产生近NNE向水平压应力,构造运动显现出带旋性特征的逆冲和走滑,震源破裂方式与之相吻合。而天山构造大跨度的空间展布、扩展形式的多样性和地震破裂的两重性,又影响到地震序列类型的多样性,使得主余型、孤立型和多震型地震在不同构造部位呈现优势分布。(4)阿尔泰的构造运动可能受到了来自印度板块与亚欧板块碰撞的远程效应和西伯利亚块体南向运动的双向影响,形成NNE和SW向水平挤压力,主要大型发震断裂做右旋剪扭错动,而一些深断裂则以逆冲运动为主。震源破裂呈现出走滑(占64%)和部分的逆冲(占27%),6级以上地震序列主要为主余型,5级左右地震则多为孤立型。     

一种基于伪随机序列和DCT的遥感影像水印算法

首先,对原始影像进行分块,通过伪随机序列选择要嵌入的影像块;然后,采用量化的方法在每一块的DCT低频系数中嵌入水印信息;最后,通过精度约束,对嵌入水印信息后的遥感影像进行误差控制。由于采用了量化的方法嵌入水印信息,其提取过程不需要原始影像的参与,实现了盲检测。实验结果表明,该算法在满足水印算法鲁棒性的同时,也能达到对遥感影像近乎零修改的目标。     

Comparative Analysis of Mitochondrial Control Region Sequence from Three Flatfish Species （Pleuronectidae）

The 5‘-end of the mitochondrial control region sequences of three flatfishes (Pleuronectiformes: Pleuronectidae) were amplified and sequenced. These sequences were compared with those of other three Pleuronectids species retrieved from GenBank. A phylogenetic tree was constructed based on the partial control region sequences. The results of phylogenetic analysis are consistent with those of conventional systematics. Compared to previous studies, the structure of the 5‘-end of mitochondrial control region was analyzed. The terminal associated sequence motif and its complementary motif were identified at the 5‘-end of the sequences. A conserved sequence block, named as CM5‘ d, was identified in the 5‘-end of control region sequences in all Pleuronectids. Another central conserved sequence block, named as CSB-F, was detected in the central conserved blocks.     

Optimal design of SDOF envelope systems for the responses of MDOF dynamic systems

The concept of envelope system for a given dynamic system is proposed in this paper which refers to those systems whose module of transfer function in the whole range of frequency domain is always bigger than that of a given system. This concept opens a new way to study the problems of robust design and modelling for dynamic systems. The condition that an envelope system has to satisfy is rendered as the determination of the positiveness of a real polynomial function and Sturm's sequence method is used to establish an easily implemented criterion for evaluating the positiveness of the polynomial in terms of its coefficients. The optimization for the envelope system is expressed as the minimization of the 2-norm of its transfer function and simplex method is employed to search for the optimal solution. Two dynamic systems are used to illustrate the optimal design for the envelope systems of some of their responses. © 1998 John Wiley & Sons, Ltd.     

东营凹陷现河地区沙三段震积岩特征及其意义

在区域构造背景研究和岩芯观察的基础上,在东营凹陷现河地区沙三段地层中识别出震积岩。震积岩的主要标志是发育各种类型的软沉积变形构造,包括微阶梯状正断层、层内小褶皱、扭曲变形、振动液化砂岩脉、震塌岩等。通过对河152井、王59井、牛38井、牛22井等井岩芯的系统观察,发现由于构造和地震强度的不同,震积岩的垂向序列有所不同,并进一步研究了各种震积岩构造特征与地震强度的关系,研究表明不同的震积岩构造特征对应不同的地震强度,进一步确定了与古地震的关系。通过对本区储层分析,认为震积岩可以作为一种有效的储集空间。这些研究为东营凹陷构造演化研究、震积岩的识别和描述以及成藏提供了重要的地质理论依据,并可为该区古地震研究提供依据。      

High-resolution sequence stratigraphy,sedimentology and reservoir quality evaluation of the Yaojia Formation in the Longxi area of the Western Slope,Songliao Basin,China

Delta-front sand bodies with large remaining hydrocarbon reserves are widespread in the Upper Cretaceous Yaojia Formation in the Longxi area of the Western Slope, Songliao Basin, China. High-resolution sequence stratigraphy and sedimentology are performed based on core observations, well logs, and seismic profile interpretations. An evaluation of the reservoir quality of the Yaojia Formation is critical for further petroleum exploration and development. The Yaojia Formation is interpreted as a third-order sequence, comprising a transgressive systems tract (TST) and a regressive systems tract (RST), which spans 4.5 Myr during the Late Cretaceous. Within this third-order sequence, nine fourth-order sequences (FS9–FS1) are recognized. The average duration of a fourth-order sequence is approximately 0.5 Myr. The TST (FS9–FS5) mostly comprises subaqueous distributary channel fills, mouth bars, and distal bars, which pass upward into shallow-lake facies of the TST top (FS5). The RST (FS4–FS1) mainly contains subaqueous distributary-channel and interdistributary-bay deposits. Based on thin-sections, X-ray diffraction (XRD), scanning electron microscope (SEM) and high-pressure mercury-intrusion (HPMI) analyses, a petrographic study is conducted to explore the impact of the sedimentary cyclicity and facies changes on reservoir quality. The Yaojia sandstones are mainly composed of lithic arkoses and feldspathic litharenites. The sandstone cements mostly include calcite, illite, chlorite, and secondary quartz, occurring as grain coating or filling pores. The Yaojia sandstones have average core plug porosity of 18.55% and permeability of 100.77 × 10⁻³ μm², which results from abundant intergranular pores and dissolved pores with good connectivity. Due to the relatively coarser sediments and abundant dissolved pores in the feldspars, the FS4–FS1 sandstones have better reservoir quality than the FS9–FS5 sandstones, developing relatively higher porosity and permeability, especially the FS1 and FS2 sandstones. The source–reservoir–cap-rock assemblages were formed with the adjoining semi-deep lake mudstones that were developed in the Nenjiang and Qingshankou Formations. This study reveals the deposition and distribution of the delta-front sand bodies of the Yaojia Formation within a sequence stratigraphic framework as well as the factors controlling the Yaojia sandstones reservoir quality. The research is of great significance for the further exploration of the Yaojia Formation in the Longxi area, as well as in other similar lacustrine contexts.     

8种石首鱼类线粒体基因组特征及分子系统进化分析

为探讨石首鱼科(Sciaenidae)鱼类分子系统进化关系,采用生物信息学方法分析了黑鳃梅童鱼(Collichthys niveatus)、棘头梅童鱼(C.lucidus)、大黄鱼(Larimichthys crocea)、小黄鱼(L.polyactis)、鮸鱼(Miichthys miiuy)、白姑鱼(Pennahia argentata)、黄姑鱼(Nibea albiflora)和皮氏叫姑鱼(Johnius belangerii)共8种石首鱼类线粒体基因组全序列的基本特征。结果显示,除皮氏叫姑鱼外,其余7种石首鱼类编码的37个基因排列顺序与脊椎动物线粒体基因组相同。基因组碱基分布存在不均衡现象,A+T含量高于G+C含量。线粒体基因组的基因变异位点分析结果表明,ND4和ND5基因可作为COI基因的辅助分子标记,应用于石首鱼类群体遗传学的研究中。黄鱼亚科5种鱼类13个蛋白质编码基因的Ka/Ks比值远低于1,显示出较强的纯化选择。皮氏叫姑鱼与其他石首鱼间的遗传距离均较大且亲缘关系较远,暗示叫姑鱼属或为石首鱼类中较为原始的类群。基于线粒体基因组全序列构建NJ系统树支持黄鱼亚科和白姑鱼亚科亲缘关系较近的形态学结论。而基于去除控制区后序列和13个蛋白质编码基因序列构建的系统树则表明两亚科鱼类间的差别在非编码区更为明显。     

High-resolution sequence stratigraphy of clastic shelves V: Criteria to discriminate between stratigraphic sequences and sedimentological cycles

In contrast to high-frequency sequences driven by high-magnitude relative sea-level changes, those controlled by short-term, minor relative sea-level and/or sediment supply changes may be difficult to discriminate from sedimentological cycles (i.e., bedsets) unrelated to shoreline shifts, especially in case of limited outcrop exposures. In fact, meter-scale, fully shallow-marine high-frequency sequences and typical meter-scale bedsets may share a similar, simple facies succession documenting either an upward increase or decrease of event beds. It is therefore necessary to define a set of criteria that allows to discriminate between thin high-frequency sequences and bedsets, based on sedimentological, stratigraphic, micropaleontological, mineralogical and diagenetic data. In particular, the sedimentological and stratigraphic criteria that aid discriminating between high-frequency sequences and bedsets include: 1) occurrence of environmental changes across bounding surfaces; 2) occurrence of water-depth changes across bounding surfaces; 3) physical appearance of bounding surfaces and associated substrate-controlled ichnofacies; 4) lateral extent of bounding surfaces; 5) presence of condensed deposits; 6) cycle thickness; 7) recognition of a set of clinoforms in a regressive shoreface-shelf succession. Moreover, the formation of wave-ravinement surfaces in the shoreface is usually associated with an increase in the percentage of benthic micro-foraminifera specimens documenting energetic conditions, and in the abundance of heavy minerals. Extensive cementation may also be found just below and/or above transgressive surfaces. However, the integration of more than one of the above criteria is necessary to reliably discriminate between sequence stratigraphic surfaces (and therefore high-frequency sequences) and bedset boundaries, the latter being only related to changes of energy level and/or local sediment supply without shoreline shifts. This work is essential to correctly reconstruct the sequence stratigraphic framework of a given succession and to interpret the factors that controlled the cyclicity.     

Mineralogical characteristics of polymetallic sulfides from the Deyin-1 hydrothermal field near 15°S,southern Mid-Atlantic Ridge

A seafloor hydrothermal field, named Deyin-1 later, near 15°S southern Mid-Atlantic Ridge(SMAR) was newly found during the 22 nd cruise carried out by the China Ocean Mineral Resources Research Development Association(COMRA). Sulfide samples were collected at three stations from the hydrothermal field during the26 th cruise in 2012. In this paper, mineralogical characteristics of the sulfides were analyzed with optical microscope, X-ray diffractometer, scanning electron microscope and electron microprobe to study the crystallization sequence of minerals and the process of hydrothermal mineralization. According to the difference of the ore-forming metal elements, the sulfide samples can be divided into three types:(1) the Ferich sulfide, which contains mainly pyrite and chalcopyrite;(2) the Fe-Cu-rich sulfide consisting predominantly of pyrite, chalcopyrite and isocubanite, with lesser amount of sphalerite, marmatite and pyrrhotine; and(3) the Fe-Zn-rich sulfide dominated by pyrite, sphalerite and marmatite, with variable amounts of chalcopyrite, isocubanite, pyrrhotine, marcasite, galena and gratonite. Mineral precipitations in these sulfides are in the sequence of chalcopyrite(isocubanite and possible coarse pyrite), fine pyrite,sphalerite(marmatite), galena, gratonite and then the minerals out of the dissolution. Two morphologically distinct generations(Py-I and Py-II) of pyrite are identified in each of the samples; inclusions of marmatite tend to exist in the coarse pyrite crystals(Py-I). Sphalerite in the Fe-Zn-rich sulfide is characterized by a"chalcopyrite disease" phenomenon. Mineral paragenetic relationships and a wide range of chemical compositions suggest that the environment of hydrothermal mineralization was largely changing. By comparison, the Fe-rich sulfide was formed in a relatively stable environment with a high temperature, but the conditions for the formation of the Fe-Cu-rich sulfide were variable. The Fe-Zn-rich sulfide was precipitated during the hydrothermal venting at relatively low temperature.