Modeling bed-load transport of coarse sediments in the Great Bay Estuary, New Hampshire

Current, sea level and bed-load transport are investigated in the Lower Piscataqua River section of the Great Bay Estuary, New Hampshire, USA—a well-mixed and geometrically complex system with low freshwater input, having main channel tidal currents ranging between 0.5 and 2 m s⁻¹. Current and sea level forced by the M₂M₄M₆ tides at the estuarine mouth are simulated by a vertically averaged, non-linear, time-stepping finite element model. The hydrodynamic model uses a fixed boundary computational domain and accounts for flooding–drying of tidal flats by making use of a groundwater component. Inertia terms are neglected in comparison with pressure gradient and bottom friction terms, which is consistent with the observed principal dynamic balance for this section of the system. The accuracy of hydrodynamic predictions in the study area is demonstrated by comparison with four tidal elevation stations and two cross-section averaged current measurements. Simulated current is then used to model bed-load transport in the vicinity of a rapidly growing shoal located in the main channel of the lower system. Consisting of coarse sand and gravel, the shoal must be dredged every five to eight years. Two approaches are taken—an Eulerian parametric method in which nodal bed-load flux vectors are averaged over the tidal cycle and a Lagrangian particle tracking approach in which a finite number of sediment particles are released and tracked. Both methods yield pathways and accumulations in agreement with the observed shoal formation and the long-term rate of sediment accumulation in the shoal area.     

Rheological Properties and Incipient Motion of Cohesive Sediment in the Haihe Estuary of China

The Haihe cohesive sediment, which is typical in China, is studied systematically for its basic physical and incipientmotion properties. Following the requirements of dredging works in the Haihe Estuary, cohesive sediment samples weretaken from three locations. Laboratory experiments were conducted to determine the rheological properties of these sam-ples and to examine the incipient motion of the cohesive sediment. It is found that the cohesive sediment has an obviousyield stress τb, which increases with the mud density in a manner of an exponential function, and so does the viscosityparameter η. The cohesive sediment behaves like a Bingham fluid when its density is below 1.38 ～ 1.40 g/cm3, andwhen denser than these values, it may become a power-law fluid. The incipient motion experiment also revealed that theincipient velocity of the cohesive sediment increases with the density in an exponential manner. Therefore, the incipientmotion is primarily related to the density, which is different from the case for non-cohesive sediment in which the incipi-ent motion is correlated with the diameter of sand particles instead. The incipient motion occurs in two different ways de-pending on the concentration of mud in the bottom. For sufficiently fine particles and a concentration lower than1.20 g/cm3, the cohesive sediment appears as fluidized mud, and the incipient motion is in the form of instability of aninternal wave. For a higher concentration, the cohesive sediment appears as general quasi-solid-mud, and the incipientmotion can be described by a series of extended Shields curves each with a different porosity for newly deposited alluvial mud.     

海洋沉积样品~(14)C测年差异来源及其结果解释

~(14)C测年已为海洋研究工作广泛应用,但由于时有不合理取样或在运用数据时没有充分考虑各种海洋环境和动力因素,因而产生无法使用数据作合理解释的现象。本文试从海洋样品本身和海洋各种营力作用分析各种数据差异的来源,认为海洋环境特别是海岸带环境的复杂性是造成海洋样品~(14)C测年数据差异的主要原因,它可能影响样品的代表性或使数据解释时得出错误结论.并指出在运用年代结果时一定要充分考虑地质地理和各种营力作用因素。     

Numerical Study on Instantaneous Discharge of Unsorted Particle Cloud in Cross Flow

The mixing characteristics of particles such as dredged sediment of variable size discharged into cross flow are studied by a 3D numerical model, which is developed to model the particle-fluid two-phase flow. The Eulerian method with the modified k-ε parameterization of turbulence for the fluid phase is used to solve fluid phase, while a Lagrangian method for the solid phase (particles), both the processes are coupled through the momentum sources. In the model the wake turbulence induced by particles has been included as additional source term in the k-ε model; and the variable drift velocities of the particles are treated efficiently by the Lagrangian method in which the particles are tracked explicitly and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumping a cloud of particles is governed by the total buoyancy of the cloud, the drag force on each particle and the velocity of cross-flow. The computed results show a roughly linear relationship between the displacement of the frontal position and the longitudinal width of the particle cloud. The particle size in the cloud and the velocity of cross flow dominate the flow behavior. The computed results are compared with the results of laboratory experiments and satisfactory agreement is obtained.     

Ensuring confidence in radionuclide-based sediment chronologies and bioturbation rates

Sedimentary records of naturally occurring and fallout-derived radionuclides are widely used as tools for estimating both the ages of recent sediments and rates of sedimentation and bioturbation. Developing these records to the point of data interpretation requires careful sample collection, processing, analysis and data modeling. In this work, we document a number of potential pitfalls that can impact sediment core records and their interpretation. This paper is not intended as an exhaustive treatment of these potential problems. Rather, the emphasis is on potential problems that are not well documented in the literature, as follows: (1) the mere sampling of sediment cores at a resolution that is too coarse can result in an apparent diffusive mixing of the sedimentary record at rates comparable to diffusive bioturbation rates observed in many locations; (2) ²¹⁰Pb profiles in slowly accumulating sediments can easily be misinterpreted to be driven by sedimentation, when in fact bioturbation is the dominant control. Multiple isotopes of different half lives and/or origin may help to distinguish between these two possible interpretations; (3) apparent mixing can occur due simply to numerical artifacts inherent in the finite difference approximations of the advection diffusion equation used to model sedimentation and bioturbation. Model users need to be aware of this potential problem. Solutions to each of these potential pitfalls are offered to ensure the best possible sediment age estimates and/or sedimentation and bioturbation rates can be obtained.     

High-resolution sediment echosounding off Peru: Late Quaternary depositional sequences and sedimentary structures of a current-dominated shelf

About 6000 km of both bathymetric and high-resolution acoustic profiles were acquired on the shelf and upper slope offshore Peru between 9° S and 14° S. Two new sediment echosounder systems – SEL-96 and SES-2000DS – provided details of the sedimentary structures of the Quaternary sequences within the Sechura-Salaverry, Huacho and Pisco Basins. To a great extent, the poleward undercurrent determines the distribution of sediments. The undercurrent has generated numerous erosional unconformities, it has winnowed hardgrounds and has created mudwaves common between 250 m and 400 m water depth. Distinct subbottom reflectors within sedimentary units represent hiatuses due to periods of intensified winnowing or non-deposition. Erosional unconformities usually marked by pronounced reflectors suggest shifts of the undercurrent system related to climatic changes and eustatic variations of sea level. On a larger scale, the stacked prograding depositional sequences reflect the sea-level cycles of the Middle Pleistocene to the Holocene. Based on the stratigraphy of our piston cores and that of Ocean Drilling Program (ODP) Site 680, the depositional sequences limited by extended unconformities were assigned to oxygen isotope stages 1 to 7. Other sedimentary structures are small straight channels that were conduits for downslope sediment transport. Deformed sediments associated with synsedimentary normal faults result from creep movements indicating beginning slope failure.     

波浪作用下岸坡和海底平衡条件的研究

提出波浪作用下岸坡和海底动态和静态平衡条件的数学模型。在已建立的推移质泥沙体积输沙率基本关系式的基础上,根据连续方程,计算出底坡、泥沙、波浪三要素在动态和静态平衡情况下的关系式,得出反映这种关系的底坡平衡函数曲线图。用实际资料对这一函数曲线进行了验证,并对实际资料相对模型的某些差异作出解释。     

湄洲湾表层沉积物中重金属的地球化学特征

根据1984年湄洲湾表层沉积物中重金属的分析资料,讨论了它们的地球化学特征和主要来源。沉积物中重金属的含量(Fe、Mn、Cu、Ni 的质量分数均值分别为3.21%、730×10~(-6)、19.4×10~(-6)、44×10~(-6)分布比较均匀,Pb、Zn 和Co 含量(质量分数均值分别为47.0×10~(-6)、25.8×10~(-6)和243×10~(-6))偏高,微量金属含量不受Fe-Mn 氧化物和有机物控制,本地区的金属来源受陆源输入的影响明显。     

Siltation Prediction for Navigation Channels and Harbour Basins on Muddy Beach

- This paper, after briefly reviewing the experimental research on sediment transport on muddy beach since the 1950s, improves and perfects the method for forecasting siltation in navigation channels and harbour basins which was first put forward in China by the authors. In consideration of silty sediment and sand, some factors in forecasting methods have been changed and modified. Consequently, the modified methods can be used either to compute siltation in navigation channels and harbour basins on muddy beach or to compute siltation and scouring in navigation channels and harbour basins on both silty beach and sandy beach. The verification of field data from eleven large, medium and small natural harbours shows a good agreement between the forecasting by the modified method and the natural conditions. Finally, the paper deals with the rational utilization of water area after the construction of the West Dyke in Lianyungang, the maintenance of water depth of the navigation channel at the entrance, siltation distribution, siltation in the navigation channel and harbour basin for ships of 100 thousand tonnnage. Results once again prove that the prospect of constructing Lianyungang Harbour into a deepwater harbour is bright.