Material component to non-linear relation between sediment yield and drainage network development: an flume experimental study

This paper examines the experimental study on influence of material component to nonlinear relation between sediment yield and drainage network development completed in the Lab. The area of flume drainage system is 81.2 m2, the longitudinal gradient and cross section slope are from 0.0348 to 0.0775 and from 0.0115 to 0.038, respectively. Different model materials with a medium diameter of 0.021 mm, 0.076 mm and 0.066 mm cover three experiments each. An artificial rainfall equipment is a sprinkler-system composed of 7 downward nozzles, distributed by hexagon type and a given rainfall intensity is 35.56 mm/hr.cm2. Three experiments are designed by process-response principle at the beginning the Ψ shaped small network is dug in the flume. Running time spans are 720 m, 1440 minutes and 540 minutes for Runs I, IV and VI, respectively. Three experiments show that the sediment yield processes are characterized by delaying with a vibration. During network development the energy of a drainage system is dissipated by two ways, of which one is increasing the number of channels (rill and gully), and the other one is enlarging the channel length. The fractal dimension of a drainage network is exactly an index of energy dissipation of a drainage morphological system. Change of this index with time is an unsymmetrical concave curve. Comparison of three experiments explains that the vibration and the delaying ratio of sediment yield processes increase with material coarsening, while the number of channel decreases. The length of channel enlarges with material fining. There exists non-linear relationship between fractal dimension and sediment yield with an unsymmetrical hyperbolic curve. The absolute value of delaying ratio of the curve     

Estimating the sediment trap efficiency of intermittently dry reservoirs: lessons from the Kruger National Park,South Africa

The assessment of sediment yield from reservoir siltation requires knowledge of the reservoir's sediment trap efficiency (TE). Widely used approaches for the estimation of the long‐term mean TE rely on the ratio of the reservoir's storage capacity (C) to its catchment size (A) or mean annual inflow (I). These approaches have been developed from a limited number of reservoirs (N ≤ 40), most of them located in temperate climate regions. Their general applicability to reservoirs receiving highly variable runoff such as in semi‐arid areas has been questioned. Here, we examine the effect of ephemeral inflow on the TE of 10 small (≤ 280 × 10³ m³), intermittently dry reservoirs located in the Kruger National Park. Fieldwork was conducted to determine the storage capacity of the reservoir basins. The frequency and magnitude of spillage events was simulated with the daily time step Pitman rainfall–runoff model. Different runoff scenarios were established to cope with uncertainties arising from the lack of runoff records and imperfect input data. Scenarios for the relationship between water and sediment discharge were created based on sediment rating curves. Taking into account uncertainties in hydrological modelling, uncertainties of mean TE estimates, calculated from all scenarios (N = 9), are moderate, ranging from ±6 to ±11% at the 95% confidence level. By comparison, estimating TE from the storage capacity to catchment area (C/A) ratio induces high uncertainty (ranges of 35 to 65%), but this uncertainty can be confined (15 to 33%) when the latter approach is combined with hydrological modelling. Established methods relying on the storage capacity to mean annual inflow (C/I) ratio most probably lead to an overestimation of the TE for the investigated reservoirs. The approach presented here may be used instead to estimate the TE of small, intermittently dry reservoirs in semi‐arid climate regions. Copyright © 2017 John Wiley & Sons, Ltd.     

The influence of tectonic subsidence on volcaniclastic sedimentation: The Cretaceous upper Daeri Member,Wido Island,Korea

The Daeri Member, a Cretaceous volcanic–sedimentary succession, can be divided into lower, middle, and upper parts based on vertical changes in its lithologic characters. The lower Daeri Member is composed of siliciclastic deposits formed in a semi‐arid floodplain environment, which is overlain by the middle Daeri Member consisting mainly of andesite lava flow. After the emplacement of the andesite, activities of intrabasinal normal faults created accommodation on hanging wall blocks together with the development of intrabasinal topographic relief. The upper Daeri Member occurs only in hanging wall blocks and is composed of rhyolitic volcaniclastic sediments formed during an explosive volcanic eruption. Following the eruption, owing to semi‐arid climatic conditions and the destruction of vegetation, the eruptive materials were easily remobilized and deposited by episodic sediment gravity flows, resulting in deposition of the resedimented volcaniclastic deposits with sheet‐like geometry. Away from the intrabasinal normal faults, the resedimented volcaniclastic deposits show a decrease in grain size together with changes in inferred depositional processes from debris flows to hyperconcentrated flows and supercritical sheetfloods. This suggests that the resedimented volcaniclastic deposits were stacked on alluvial fan environments induced by intrabasinal topographic relief associated with normal fault activities. In addition, episodic movement of the faults gave rise to periodic fluctuation of the accommodation and an increase in gradient of the alluvial fan surface, resulting in the development of coarsening‐upward trends in the resedimented volcaniclastic deposits. The development of the alluvial fan and the coarsening‐upward trends indicate that dynamic tectonic subsidence and concomitant changes in the intrabasinal physiographic relief influenced the depositional processes and sizes of the transported volcaniclastic sediments of the upper Daeri Member. Thus, it is necessary to carefully observe tectonic signatures in volcaniclastic successions, particularly the syneruptive lithofacies, in order to reconstruct the tectonic and volcanic histories of receiving basins.     

日照市海岸带海滩沉积物粒度特征及物源分析

根据日照市海岸带2个重点海滩所采集的样品,通过粒度、磁化率、主微量及稀土元素等方面的调查资料,综合分析了研究区沉积物类型、分布特征、搬运路径及物质来源。结果表明,研究区沉积物类型以砂为主,在平行海岸方向上,沉积物粒径自北至南由细变粗。在垂直海岸方向上,从滩肩到滩面再到低潮线处,沉积物粒径逐渐变细。海滨国家森林公园海滩的分选性要好于万平口海水浴场海滩。沉积物受黄海沿岸流影响,多自北向南运移。海滩中浅部物质的来源与陆内一侧基岩中斜长片麻岩和二长花岗岩的关系较为密切,深部物质的来源与靠海一侧基岩中花岗斑岩和花岗闪长岩的关系较为密切。     

科尔沁沙地土地利用与耕作方式对土壤风蚀的影响

土壤风蚀造成的直接生态后果是土地资源的退化。在春播前两次沙尘暴事件中,对科尔沁沙地几种具有代表性的土地类型的土壤风蚀量及土壤特性进行了野外测定、分析,结果表明:(1)在同一沙尘暴天气下,由于土地利用和耕作方式的不同,土壤风蚀量存在着差异,新垦农地和翻耕农地的风蚀量显著高于未垦草地、免耕农地和麻黄地;免耕农地则与未垦草地的风蚀量相差不大,风蚀危害较轻;麻黄地几乎不受风蚀侵害。新垦农地、翻耕农地、免耕农地、未垦草地、麻黄地两次观测的土壤风蚀量平均值依次为24.59、15.60、2.26、1.46和0.22 g/h.cm2。(2)基于土壤特性计算的土壤退化指数结果表明,新垦农地和翻耕农地发生了较为严重的退化。     

Gully‐head erosion processes on a semi‐arid valley floor in Kenya: a case study into temporal variation and sediment budgeting

A three year monitoring programme of gully‐head retreat was established to assess the significance of sediment production in a drainage network that expanded rapidly by gully‐head erosion on the low‐angled alluvio‐lacustrine Njemps Flats in semi‐arid Baringo District, Kenya. This paper discusses the factors controlling the large observed spatial and temporal variation in gully‐head retreat rates, ranging from 0 to 15 m a^?1. The selected gullies differed in planform and in runoff‐contributing catchment area but soil material and land use were similar. The data were analysed at event and annual timescales. The results show that at annual timescale rainfall amount appears to be a good indicator of gully‐head retreat, while at storm‐event timescale rainfall distribution has to be taken into account. A model is proposed, including only rainfall (P) and the number of dry days (DD) between storms: which explains 56 per cent of the variation in retreat rate of the single‐headed gully of Lam1. A detailed sediment budget has been established for Lam1 and its runoff‐contributing area (RCA). By measuring sediment input from the RCA, the sediment output by channelized flow and linear retreat of the gully head for nine storms, it can be seen that erosion shifts between different components of the budget depending on the duration of the dry period (DD) between storms. Sediment input from the RCA was usually the largest component for the smaller storms. The erosion of the gully head occurred as a direct effect of runoff falling over the edge (GH_waterfall) and of the indirect destabilization of the adjacent walls by the waterfall erosion and by saturation (GH_mass/storage). The latter component (GH_mass/storage) was usually much larger that the former (GH_waterfall). The sediment output from the gully was strongly related to the runoff volume while the linear retreat, because of its complex behaviour, was not. Overall, the results show that the annual retreat is the optimal timescale to predict retreat patterns. More detailed knowledge about relevant processes and interactions is necessary if gully‐head erosion is to be included in event‐based soil erosion models. Copyright © 2001 John Wiley & Sons, Ltd.     

Spatial and seasonal variability of sediment accumulation potential through controlled flooding of the beels located in the polders of the Ganges-Brahmaputra-Meghna delta of Southwest Bangladesh

The Ganges-Brahmaputra-Meghna (GBM) delta plain within Bangladesh is one of the most vulnerable to relative sea level rise (RSLR) in the world especially under current anthropogenically modified (i.e., embanked) conditions. Tidal river management (TRM) as practiced in coastal regions of Bangladesh may provide an opportunity to combat RSLR by raising the land level through controlled sedimentation inside beels (depression within embanked polders) with re-opening of polders. To date, TRM has been applied to tide-dominated coastal regions, but the potential applicability of TRM for the beels within the polders of river-dominated and mixed flow (MF) regimes remains to be assessed. We apply a calibrated 2D numerical hydromorphodynamic model to quantify sediment deposition in a beel flooded through breaching of the polder dike under conditions of river-dominated, tide-dominated and MF regimes for different seasons and applying different regulation schemes for the flow into the beel. Simulation results show considerable seasonality in sediment deposition with largest deposition during the monsoon season. The potential of controlled flooding is highest in the tide-dominated region, where sediment accumulation can be up to 28 times higher than in the river-dominated region. Regulating flow into a beel increases trapping efficiency, but results in slightly lower total deposition than without regulation. We conclude that re-establishing flooding of the beel within the polder without regulating the flow into the beel through breaching of the polder dike is a promising strategy for the mixed and tide-dominated flow regions in the delta as the sediment accumulation can raise the land surface at a higher rate than RSLR and effective SLR (ESLR). In the more upstream river-dominated section of the delta, accumulation rates would be much lower, but the pressure of sea level rise on these areas is lower as well. Owing to the abundant availability of sediment, application of controlled flooding like TRM therefore provides an opportunity to counteract the impact of RSLR and ESLR by means of land raising, particularly along the tidal river reaches in the GBM delta.     

Cobble cam: grain‐size measurements of sand to boulder from digital photographs and autocorrelation analyses

A new application of the autocorrelation grain size analysis technique for mixed to coarse sediment settings has been investigated. Photographs of sand‐ to boulder‐sized sediment along the Elwha River delta beach were taken from approximately 1·2 m above the ground surface, and detailed grain size measurements were made from 32 of these sites for calibration and validation. Digital photographs were found to provide accurate estimates of the long and intermediate axes of the surface sediment (r² > 0·98), but poor estimates of the short axes (r² = 0·68), suggesting that these short axes were naturally oriented in the vertical dimension. The autocorrelation method was successfully applied resulting in total irreducible error of 14% over a range of mean grain sizes of 1 to 200 mm. Compared with reported edge and object‐detection results, it is noted that the autocorrelation method presented here has lower error and can be applied to a much broader range of mean grain sizes without altering the physical set‐up of the camera (～200‐fold versus ～6‐fold). The approach is considerably less sensitive to lighting conditions than object‐detection methods, although autocorrelation estimates do improve when measures are taken to shade sediments from direct sunlight. The effects of wet and dry conditions are also evaluated and discussed. The technique provides an estimate of grain size sorting from the easily calculated autocorrelation standard error, which is correlated with the graphical standard deviation at an r² of 0·69. The technique is transferable to other sites when calibrated with linear corrections based on photo‐based measurements, as shown by excellent grain‐size analysis results (r² = 0·97, irreducible error = 16%) from samples from the mixed grain size beaches of Kachemak Bay, Alaska. Thus, a method has been developed to measure mean grain size and sorting properties of coarse sediments. Copyright © 2009 John Wiley & Sons, Ltd.     

A SUSPENDED SEDIMENT BUDGET OF THE YICHANG-WUHAN REACH OF THE YANGTZE RIVER, CHINA

The amount of the sediment deposition in the Yichan-Wuhan reach of the middle Yangtze River (also known as Changjiang River) has been determined using the concept of sediment budget at the channel-reach scale. The fill-scour processes of the middle Yangtze River were studied during the period 1956–1997 in response to the variation in sediment load and flow inputs. The results show that 13.3% of the net input of sediment was deposited in the studied river reach. Since 1956, the output sediment load of the studied reach increased with time to 1981, followed by a decline. The increase in output before 1981 can be related to the man-made bend neck-cutoff which caused a decrease in the sediment load diverted through the 'three outfalls' (i.e. the three distributaries from the Yangtze main stem to the Dongting Lake) and increased the sediment-carrying capacity of the river. Thereby, the river could transport more sediment to the outlet of the studied river reach. The decrease in the sediment load output after 1984 was directly due to the decreased sediment load at Yichang station. Multiple regression equations have been established to assess the contributions of influencing factors to the variation in sediment deposition amount in the studied river reach.     

Multivariate correlation analysis of suspended-sediment characteristics

Principal component analysis (PCA) was employed to investigate interrelationships among various characteristics of seawater and suspended sediments obtained from surface waters of two Asian marginal seas. On the basis of multivariate correlation analysis for the two marginal seas combined, three important factors were extracted and interpreted: (1) current-energy conditions, (2) the influence of rivers, and (3) biochemical conditions of seawater. A relationship between anisotropic mineral grains and combustible organic matter is suggested by the fact that suspended sediment, containing coarser anisotropic mineral grains, also contains larger amounts of combustible organic matter.