Automatic tracing of the foot of the continental slope

The UNCLOS III (Article 76, Section 4(b)) defines the foot of the continental slope as the point of maximum change in the gradient at its base. It is impossible to locate so defined afoot and thus to trace the foot‐line objectively by eye. In this study we show a method designed automatically to detect and trace the foot‐line of the continental slope from an irregular array of bathymetrical data. Our algorithm first transforms the bathymetric surface to a maximum curvature surface. On this new surface, the foot‐line corresponds to one of the ridges; instead of tracing the foot‐line on the bathymetric surface, we now can trace the ridges on the maximum curvature surface. The tracing of the ridges can be done automatically and objectively and the foot‐line is identified as being one of these ridges. We devote particular attention to the case when the ridge‐line is not defined, i.e., to the case when the point of maximum gradient change becomes a region of maximum gradient change.     

Wave‐induced pore pressure in relation to ocean floor stability of cohesionless soils

One of the important geotechnical considerations for many engineering installations, such as pipelines and anchors, in an oceanic environment involving sand deposits is that of potential ocean floor instability due to the development of high pore pressures caused by the direct action of waves. This article presents a procedure for evaluating the magnitude and distribution of wave‐induced pore pressures in ocean floor deposits. The method takes into account the distribution of wave‐induced pore pressures in ocean floor deposits. The method takes into account the distribution of cyclic shear stresses in the soil profile as well as the important factor of pore‐pressure dissipation. The variation of properties within the soil profile can also be easily incorporated into the analytical procedure. The analysis provides the complete time history of pore‐pressure response and shows clearly that failure to include the pore‐pressure dissipation effects would lead to radically conservative design. The results also provide a basis for designing remedial measures, if required, to avert the development of high pore pressures and their deleterious effects.     

Geotechnical characterization of slump scars,eroded slopes,and correlated deposits on continental margins: Gulf of Lions,Western Mediterranean sea

Abstract

Vertical variations of geotechnical properties in the uppermost sediment layers characterize the main sedimentary processes acting on the construction and destruction of progressive‐type continental slopes. In the Gulf of Lions, the original thicknesses and distribution of the uppermost sedimentary layers of the continental slope and rise, which consist of Holocene muds overlying Pleistocene muds, have been greatly modified by erosion and several kinds of slope failure processes. Each process is typified through sets of geotechnical properties measured in the eroded or slumped sections and in the associated sediment accumulations.

In slump scars, the water‐rich Holocene muds lie on fine, overconsolidated, Pleistocene muds with high plasticity and low shear strength. In bottom current‐eroded slopes, where modern sedimentation is extremely reduced, the Pleistocene muds frequently outcrop and may sometimes be overlain by a very thin layer of Holocene muds. The Pleistocene muds of eroded slopes are overconsolidated and more silty and less plastic than the Pleistocene muds from slopes affected by slope failure, their shear strength being 10 times greater.

Deposits at the toe of slumps are very often formed by several superposed three‐layer units (triplets of interstratified Holocene, transitional, and Pleistocene layers) issued from retrogressive slumping occurring in the slump scars above their head area. The main body of each layer is then relatively undisturbed, showing the usual burial geotechnical gradients due to overburden pressure (i.e., decrease of water content and increase of unit weight and shear strength). At the toe of bottom current‐eroded slopes, a thick and homogeneous layer of Holocene muds overlies the Pleistocene muds; this Holocene layer has unappreciable burial depth gradient of its geotechnical parameters because of a high rate of modem and continuous deposition.     

Fundamental study for morphodynamic modelling: Sand mounds in oscillatory flows

Experiments on sand mounds in oscillatory flow, undertaken in controlled, large-scale laboratory conditions, have produced well-defined data sets for model comparison. Three bathymetries with different levels of submergence, including a surface-piercing case, were tested. The maximum slope was about 1:5.5. Sediment transport is due to bed load with ripple formation. The principal time-dependent bulk parameters are the vertical distance of the centre of gravity above the base and the volume of the mound. A semi-implicit finite-volume depth-averaged hydrodynamic model is used to drive morphodynamics, using van Rijn's sediment flux model generalized to take account of bed slope, and some justification is given for depth-averaged modeling in these conditions. Starting the model runs with the conditions at the end of the first cycle avoided initial atypical physical behaviour. In general good predictions were obtained with an angle of repose reduced from the standard value of about 30° for stationary beds to 15°. For these situations, morphodynamics was largely unaffected by a hydrodynamic roughness height in the range 2.5D₅₀ to 51D₅₀, with larger values accounting for ripple roughness. The reduced angle of repose may be physically expected with mobile beds but this specific value is only expected to be suited to this form of bed motion. In one case an exaggerated ripple formed near the top of the mound reducing agreement with experiment. For the submerged case with normal ripple structure excellent predictions were obtained. For the initially surface-piercing mound, the time of submergence was better predicted with a 30° angle of repose, presumably due to the prominent influence of the near stationary bed near the wet/dry interface, although long term predictions were better predicted with 15°. The occurrence of vortex shedding in the first cycle modeled was in agreement with experimental observation.     

The influence of light availability and predatory behavior of the decapod crustacean Nephrops norvegicus on the activity rhythms of continental margin prey decapods

The day–night cycle is one of the strongest geophysical cycles modulating species' behavioral rhythms. However, in deep-water continental margins, where light intensity decreases over depth, interspecific competition may alter behavioral responses to day–night cycles. The burrowing decapod crustacean Nephrops norvegicus is a large-size predator in benthic communities, exerting despotic territorial behavior. In this study, we analysed how the effect of light intensity cycles on decapod behavioral rhythms is reduced as one moves from shelves to slopes. In the Western Mediterranean, the predatory behavior and interspecific competition for substrate use of Nephrops increases moving from the shelf (100–110 m) to the slope (400–430 m). Vector fitting and generalized additive models were used to assess the effect of light intensity and behavioral rhythms of N. norvegicus on the temporal variation of prey decapods co-occurring in trawl tow catches carried out on the shelf and the slope during October 1999 and June 2000. The combination of diel variations in light intensity and N. norvegicus abundance influences the activity rhythms of prey decapods in a depth- and seasonal-dependent manner. Light modulation is stronger on the shelf and weaker on the slope, where Nephrops population size is greater. Although present regression analysis does not necessarily imply a direct cause–effect relationship between rhythms of predators and prey, we suggest that Nephrops alters the temporal patterning in the behavior of its prey on the slope, where light intensity is reduced. This alteration is stronger in endobenthic species than in benthopelagic species; the former rely on bottom substrate for the expression of behavioral rhythms, experiencing stronger interspecific competitions with Nephrops at time of activity.     

Methylmercury production in sediments of Chesapeake Bay and the mid-Atlantic continental margin

Methylmercury (MeHg) concentration and production rates were studied in bottom sediments along the mainstem of Chesapeake Bay and on the adjoining continental shelf and slope. Our objectives were to 1) observe spatial and temporal changes in total mercury (HgT) and MeHg concentrations in the mid-Atlantic coastal region, 2) investigate biogeochemical factors that affect MeHg production, and 3) examine the potential of these sediments as sources of MeHg to coastal and open waters. Estuarine, shelf and slope sediments contained on average 0.5 to 1.5% Hg as MeHg (% MeHg), which increased significantly with salinity across our study site, with weak seasonal trends. Methylation rate constants (k_meth), estimated using enriched stable mercury isotope spikes to intact cores, showed a similar, but weaker, salinity trend, but strong seasonality, and was highly correlated with % MeHg. Together, these patterns suggest that some fraction of MeHg is preserved thru seasons, as found by others [Orihel, D.M., Paterson, M.J., Blanchfield, P.J., Bodaly, R.A., Gilmour, C.C., Hintelmann, H., 2008. Temporal changes in the distribution, methylation, and bioaccumulation of newly deposited mercury in an aquatic ecosystem. Environmental Pollution 154, 77] Similar to other ecosystems, methylation was most favored in sediment depth horizons where sulfate was available, but sulfide concentrations were low (between 0.1 and 10 μM). MeHg production was maximal at the sediment surface in the organic sediments of the upper and mid Bay where oxygen penetration was small, but was found at increasingly deeper depths, and across a wider vertical range, as salinity increased, where oxygen penetration was deeper. Vertical trends in MeHg production mirrored the deeper, vertically expanded redox boundary layers in these offshore sediments. The organic content of the sediments had a strong impact on the sediment:water partitioning of Hg, and therefore, on methylation rates. However, the HgT distribution coefficient (K_D) normalized to organic matter varied by more than an order of magnitude across the study area, suggesting an important role of organic matter quality in Hg sequestration. We hypothesize that the lower sulfur content organic matter of shelf and slope sediments has a lower binding capacity for Hg resulting in higher MeHg production, relative to sediments in the estuary. Substantially higher MeHg concentrations in pore water relative to the water column indicate all sites are sources of MeHg to the water column throughout the seasons studied. Calculated diffusional fluxes for MeHg averaged  1 pmol m^− 2 day^− 1. It is likely that the total MeHg flux in sediments of the lower Bay and continental margin are significantly higher than their estimated diffusive fluxes due to enhanced MeHg mobilization by biological and/or physical processes. Our flux estimates across the full salinity gradient of Chesapeake Bay and its adjacent slope and shelf strongly suggest that the flux from coastal sediments is of the same order as other sources and contributes substantially to the coastal MeHg budget.     

Numerical study of pollutant transport in the sea-bay with mild slope beach

Ｎｕｍｅｒｉｃａｌｓｔｕｄｙｏｆｐｏｌｌｕｔａｎｔｔｒａｎｓｐｏｒｔｉｎｔｈｅｓｅａ－ｂａｙｗｉｔｈｍｉｌｄｓｌｏｐｅｂｅａｃｈＷａｎｇＺｅｌｉａｎｇａｎｄＴａｏＪｉａｎｈｕａ（ＲｅｃｅｉｖｅｄＤｅｃｅｍｂｅｒ２２,１９９６;ａｃｃｅｐｔｅｄＪａｎｕ...     

基于精细数据处理的叠前深度偏移在琼东南盆地陵水凹陷坡折区的应用

琼东南盆地陵水凹陷,受坡折区崎岖海底和复杂地质构造的影响,导致该地区速度模型构建精度不高,从而严重影响到成像品质。针对坡折区的精确速度模型构建难题,首先采用组合多次波衰减、宽频处理、叠前信噪比增强等针对性处理技术,得到宽频带高信噪比的叠前数据,在此基础上统计分析不同水深速度规律,应用断控和地质约束速度建模技术,建立初始速度模型,然后利用基于宽频数据的高分辨断控约束网格层析反演技术,经过多次迭代完成深度域各向异性速度建模,并实现了陵水凹陷坡折区的高精度叠前深度偏移成像。叠前深度偏移成像显示,基于精细速度模型的叠前深度偏移技术科明显提高坡折区信噪比,改善成像质量,同时可有效消除地层同相轴扭曲的现象,恢复了地下地层的真实构造形态,从而可为目标评价与钻探决策提供更可靠地震资料。     

南海东北部陆架边缘第四纪高分辨率层序地层和沉积体系演化及其控制因素

The northeastern shelf margin of the South China Sea(SCS) is characterized by the development of large scale foresets complexes since Quaternary. Based on integral analysis of the seismic, well logging and paleontological data, successions since ～3.0 Ma can be defined as one composite sequence, consist of a set of regional transgressive to regressive sequences. They can be further divided into six 3 rd order sequences(SQ0–SQ5) based on the Exxon sequence stratigraphic model. Since ～1.6 Ma, five sets of deltaic systems characterized by development of wedge-shaped foresets complexes or clinoforms had been identified. High-resolution seismic data and the thick foresets allowed further divided of sub-depositional sequences(4 th order) of regression to transgression, which is basically consistent with published stacked benthic foram O-isotope records. Depositional systems identified in the study area include deltaic deposits(inner-shelf deltas and shelf-edge deltas), incised valleys, and slope slumping massive deposits. Since ～1.6 Ma, clinoforms prograded from the southern Panyu Lower Uplift toward the northern Baiyun Depression, shelf slope break migrated seaward, whereas the shelf edge of SQ0 migrated landward. The development of incised valleys in the continental shelf increased upward,especially intensive on the SB3 and SB2. The slumping massive deposits increased abruptly since SB2, which corresponds to the development of incised valleys. The evolution of depositional systems of continental slope mainly controlled by the combined influence of sea level changes, tectonic movements, sediment supply and climate changes. Since ～3.0 Ma, relative sea level of the northern SCS had been experienced transgression(～3.0 Ma BP) to regression(～1.6 Ma BP). The regional regression and maximum transgressions of the composite sequences were apparently enhanced by uplift or subsidence related to tectono-thermal events. In addition,climatic variations including monsoon intensification and the mid-Pleistocene transition may have enhanced sediment supply by increasing erosion rate and have an indispensable influence on the development of the incised valleys and 5 sets of deltaic systems since ～1.6 Ma.     

A laboratory study on capillary sealing efficiency of Iranian shale and anhydrite caprocks

Caprock has the most important role in the long term safety of formation gas storage. The caprocks trap fluid accumulated beneath, contribute to lateral migration of this fluid and impede its upward migration. The rapid upward passage of invasive plumes due to buoyancy pressure is prevented by capillary pressure within these seal rocks. In the present study, two main seal rocks, from the Zagros basin in the southwest of Iran, a shale core sample of Asmari formation and an anhydrite core sample of Gachsaran formation, were provided. Absolute permeabilities of shale and anhydrite cores, considering the Klinkenberg effect, were measured as 6.09 × 10⁻¹⁸ and 0.89 × 10⁻¹⁸ m², respectively. Capillary sealing efficiency of the cores was investigated using gas breakthrough experiments. To do so, two distinct techniques including step by step and residual capillary pressure approaches were performed, using carbon dioxide, nitrogen and methane gases at temperatures of 70 and 90 °C, under confining pressures in the range 24.13–37.92 MPa. In the first technique, it was found that capillary breakthrough pressure of the cores varies in the range from 2.76 to 34.34 MPa. Moreover, the measurements indicated that after capillary breakthrough, gas effective permeabilities lie in range 1.85 × 10⁻²¹ – 1.66 × 10⁻¹⁹ m². In the second technique, the minimum capillary displacement pressure of shale varied from 0.66 to 1.45 MPa with the maximum effective permeability around 7.76 × 10⁻²¹ – 6.69 × 10⁻²⁰ m². The results indicate that anhydrite caprock of the Gachsaran formation provides proper capillary sealing efficacy, suitable for long term storage of the injected CO₂ plumes, due to its higher capillary breakthrough pressure and lower gas effective permeability.