王集油田低阻油层成因分析

在收集整理低阻油层资料的基础上,对低阻油层成因进行了分析,并根据研究区的具体情况对王集油田低阻油层成因进行了分析,确定了相控低阻和复杂水系低阻为王集油田低阻油层的主要模式。这为王集油田老井复查和提高油气层的解释符合率奠定了坚实的基础,具有一定的指导意义。     

Subsoil zoning of Mexico City using qualitative relationships between soil strength and electrical resistivity

Summary The seismic events occurring on 19 and 20 September 1985, whose epicentre was located in the coastal region of Michoacan, Mexico, produced tremendous damage in Mexico City. As a result of these losses the civil authorities of the city decided to study and evaluate the mechanical characteristics of the subsoil. To achieve this, it was necessary to drill several boreholes to obtain needed geophysical and geotechnical information. The geophysical method of electrical resistivity was the most appropriate to the research. This method enabled us to understand the structure and soil characteristics of the Mexican Valley.     

高密度电法三电位电极系装置勘察适用性研究

为了对比分析高密度电法三电位电极系α、β和γ排列针对工程中常见的基岩面、充水断层以及充填型地下空洞等类型地质体适用性的差异,首先建立相关地电模型进行正演模拟计算,并对计算电阻率进行加噪二维反演,再以工程应用实例进行验证和进一步讨论。正演与实例对比结果表明:β排列在地形等干扰条件较小时对充水断层以及充填型地下空洞分辨能力较强;α排列为基岩面探测最理想装置,而当存在一定地形等干扰条件时,α、γ排列应分别为地下空洞和近直立断层勘探的最佳装置。     

磁性源近区瞬变电磁法电阻率偏低的原因

探讨瞬变电磁法观测电阻率偏低或很大偏低于实际电阻率的原因.认为它是由供电期间供电回线与接收回线之间电场耦合产生的附加效应造成的,该效应产生的电势成为观测瞬变电势的强背景值;最后给出了减弱(或消除)这种电场干扰的方法与措施.     

湖南省岳家桥典型岩溶发育区电性特征及构造格架研究

为探讨湖南省益阳市岳家桥地质灾害现状,以区内典型岩溶发育区为研究对象,通过长剖面高密度电法、视电阻率联合剖面法等地球物理方法,研究了地层电性响应特点,利用钻孔数据和综合电法勘探数据建立了三维地层结构模型,揭示了典型区域近地表电性结构形态,构建了区内三维地层构造格架,圈定了岩溶发育范围,并评价了地质灾害程度.研究表明:因地制宜地利用综合电法勘探,有助于在我国南方含水较多的岩溶发育区快速、有效地进行灾害范围的圈定和评价.     

综合物探方法在太原市蒙山采空区探测中的应用

针对太原市蒙山煤矿采空区地形起伏较大、需弯线测量等因素制约的特殊场地条件,提出了阵列形式观测的高密度电阻率法和单点测量方式的瞬变电磁法相结合的综合物探方法.前者二维异常反演分辨率较高,可弥补瞬变电磁法浅部探测盲区,后者具有探测深度大的优势,采用一维异常反演方式可弥补高密度电阻率法受剖面折线展布和地形起伏影响的缺点.由此查明了该矿区采空区的位置及分布情况,后期钻探验证表明所采用的综合物探方法是行之有效的.该综合物探方法组合模式实现了两种物探方法的优势互补,可为同类场地条件下探测煤层采空区提供有意义的借鉴.     

EH4电磁成像系统在砂岩地区勘查地下水的应用研究

EH4电磁成像系统是1套电磁自动采集和处理系统,它是CSAMT和MT的结合体.本文介绍了EH4电磁成像系统的原理、特点和该系统在砂岩地区,如内蒙、新疆、云南等地区进行地下水勘查的应用实例和效果     

The lithospheric transition between the Delamerian and Lachlan orogens in western Victoria: new insights from 3D magnetotelluric imaging

The magnetotelluric (MT) method was used to image the crust and upper mantle beneath the Delamerian and Lachlan orogens in western Victoria, Australia. During the Cambrian time period, this region changed from being the extended passive margin of Proterozoic Australia into an Andean-style convergent margin that progressively began to accrete younger oceanic terranes. Several broadband MT transects, which were collected in stages along coincident deep (full crust imaging) seismic reflection lines, have now been combined to create a continuous 500 km east–west transect over the Delamerian–Lachlan transition region in the Stawell Zone. We present the electrical resistivity structure of the lithosphere using both 3D and 2D inversion methods. Additionally, 1D inversions of long-period AusLAMP (Australian Lithospheric Architecture Magnetotelluric Project) MT data on a 55 km regionally spaced grid were used to provide starting constraints for the 3D inversion of the 2D profile. The Delamerian to Lachlan Orogen transition region coincides with the Mortlake Discontinuity, which marks an isotopic discontinuity in Cenozoic basalts, with higher strontium isotope enrichment ratios in the Lachlan Orogen relative to the Delamerian Orogen. Phase tensor ellipses of the MT data reveal a distinct change in electrical resistivity structure near the location of the Mortlake Discontinuity, and results of 3D and 2D inversions along the MT profile image a more conductive lower crust and upper mantle beneath the Lachlan Orogen than the Delamerian Orogen. Increased conductivity is commonly ascribed to mantle enrichment and thus supports the notion that the isotope enrichment of the Cenozoic basalts at least partially reflects an enriched mantle source rather than crustal contamination. Fault slivers of the lower crust from the more conductive Lachlan region expose Cambrian boninites and island arc andesites indicative of subduction, a process that can enrich the mantle isotopically, and also electrically, by introducing carbon (graphite) and water (hydrogen).     

高密度电阻率法在地下涵洞勘测中的应用

本文介绍的高密度电阻率法是一种新兴的电阻率方法，与常规电阻率方法相比，高密度电阻率法具有成本低，效率高，测点密集，反映地电信息更丰富，更直观以及资料解释简单方便等特点。本文运用高密度电阻率法勘测地下涵洞，实践证明，高密度电阻率法获得的图形，质量高，解释误差小，是一种方便实用，效果良好，能广泛应用于工程勘测的物探方法。     

SOTEM一维等效源反演方法

电性源短偏移距瞬变电磁法( SOTEM)是一种探测深度大、精度高的瞬变电磁工作形式,一维反演是目前SOTEM数据处理解释的主要手段。从电性源瞬变电磁场的扩散理论出发,研究了针对SOTEM的一维等效源反演方法。研究表明,传统的等效源反演方法对于实施近源观测的SOTEM并不完全适用,在早期会造成反演电阻率严重偏离真实值的情况。针对上述情况,提出了采用全期视电阻率进行校正的方法。理论模型的计算和河北某金矿的实际应用表明,经过校正后的反演算法在全期内都能很好地反映地层的真实电性分布。