EXPERIMENTAL STUDY ON SOIL MOISTURE USING DUAL-FREQUENCY MICROWAVE RADIOMETER

1INTRODUCTIONSoil is the basis of human's living. Soil moisture plays asignificant role in studying the matter and energy ex-changes in global hydrology sphere. The evaporation ofsoil moisture has an influence on the water vapor cycle.Meanwhile soil moisture is also one of the firsthandmeasurable parameters in crop yield estimation and wa-ter resources management (JACKSON et al., 1993). Theinfluence of the interaction of land and atmosphere onsoil moisture can bring about anomalous cli…     

Application of the SHETRAN basin‐scale,landslide sediment yield model to the Llobregat basin,Spanish Pyrenees

The first application of the SHETRAN basin‐scale, landslide erosion and sediment yield model is carried out for a major landsliding event in the upper 505 km² of the Llobregat basin, in the eastern Spanish Pyrenees, in November 1982. The model simulates the spatial distribution of shallow landslides and their sediment yield. Acknowledging uncertainty in the model parameter evaluation, the aim of the application was not to reproduce the observed occurrence of landslides as accurately as possible with one simulation, but to bracket the observed pattern with several simulations representing uncertainty in the key input conditions. Bounds on the landslide simulations were thus determined as a function of uncertainty in the vegetation root cohesion (used in the model factor of safety calculations). The resulting upper bound considerably overestimates the observed pattern (17 000 landslides compared with an observation of around 700), but it reproduces several of the principal clusters in the observed pattern. The lower bound contains around 500 landslides. The sediment yield estimates (2670–14 630 t km^?2) are comparable to measurements elsewhere in the Pyrenees for extreme events. The results demonstrate an ability to simulate the basin‐scale landslide response to a rainfall event and the resulting sediment yield. They also highlight the need for further research in setting the uncertainty bounds and in avoiding large overestimates of landslide occurrence arising in part from a current inability to model small‐scale controls for a basin of the given size. Copyright © 2006 John Wiley & Sons, Ltd.     

A laboratory study on capillary sealing efficiency of Iranian shale and anhydrite caprocks

Caprock has the most important role in the long term safety of formation gas storage. The caprocks trap fluid accumulated beneath, contribute to lateral migration of this fluid and impede its upward migration. The rapid upward passage of invasive plumes due to buoyancy pressure is prevented by capillary pressure within these seal rocks. In the present study, two main seal rocks, from the Zagros basin in the southwest of Iran, a shale core sample of Asmari formation and an anhydrite core sample of Gachsaran formation, were provided. Absolute permeabilities of shale and anhydrite cores, considering the Klinkenberg effect, were measured as 6.09 × 10⁻¹⁸ and 0.89 × 10⁻¹⁸ m², respectively. Capillary sealing efficiency of the cores was investigated using gas breakthrough experiments. To do so, two distinct techniques including step by step and residual capillary pressure approaches were performed, using carbon dioxide, nitrogen and methane gases at temperatures of 70 and 90 °C, under confining pressures in the range 24.13–37.92 MPa. In the first technique, it was found that capillary breakthrough pressure of the cores varies in the range from 2.76 to 34.34 MPa. Moreover, the measurements indicated that after capillary breakthrough, gas effective permeabilities lie in range 1.85 × 10⁻²¹ – 1.66 × 10⁻¹⁹ m². In the second technique, the minimum capillary displacement pressure of shale varied from 0.66 to 1.45 MPa with the maximum effective permeability around 7.76 × 10⁻²¹ – 6.69 × 10⁻²⁰ m². The results indicate that anhydrite caprock of the Gachsaran formation provides proper capillary sealing efficacy, suitable for long term storage of the injected CO₂ plumes, due to its higher capillary breakthrough pressure and lower gas effective permeability.     

象山港余流特征数值研究

基于Delft3D-Flow模块建立了象山港海域的三维斜压潮流数值模型,结合实测水文资料,研究了象山港的潮(余)流特征,对欧拉余流场的时空分布进行了定量的比较和分析,并与潮流测站计算分析得到的欧拉余流分布对比,很好的模拟了象山港的余流特征。结果表明:由湾外至湾顶,余流呈减小的趋势,湾外余流最大为33 cm/s,湾顶最小,余流平均仅5 cm/s。垂向上,表层余流大于底层余流,表层余流指向湾外,而底层余流则指向湾内。对比斜压、正压两种模式下的欧拉余流分布,可以看出湾顶附近主要受径流控制,两种模式得到的结果基本一致,口门至西沪港区域受径流和潮流的共同影响,斜压模式更准确地模拟出了水体层化和垂向余环流结构。     

点蚀损伤下桩基式平台腿柱轴压极限承载力研究

采用圆柱体点蚀损伤模型,建立含细观尺度点蚀损伤的桩基式平台腿柱多尺度精细化数值模型,研究壁厚损伤度、点蚀损伤强度以及点蚀体积损伤强度影响平台腿柱轴压极限承载力的规律。研究结果表明,壁厚损伤度及点蚀损伤强度明显削弱平台腿柱的极限强度,且随点蚀损伤强度增大壁厚损伤度的影响加剧;点蚀体积损伤强度由于综合考虑了壁厚损伤度和点蚀损伤强度的耦合因素,相比于独立考虑后两者,其更能合理地描述点蚀损伤对平台腿柱极限强度的影响,故点蚀体积损伤强度体现了点蚀损伤的关键特征。本方法不仅适用于研究点蚀损伤构件的极限承载力,其所提出的点蚀损伤模型的构建方法,可拓展于研究受点蚀损伤的整体平台结构的极限承载力,且确定点蚀体积损伤强度为描述点蚀损伤特征的关键参数后,有望将其用于修正点蚀损伤平台腿柱的承载力设计公式。     

�����������α�����������Ӱ���������������

?????????????α??????????????????????????????????????????????????????鷽??????????в????????????????????о?????????1)?????????????????α?(?????NS??)???????????????????????????????????????????2)?????????????????NS?????????????????????????????????????????????3)????????????????????????????4)?????NE??EW?????????3?????????????????5)?????NS??????????и?????????????????????????????6)??????NE?????????????????????????????????????????7) ??????????????????????????????????????????????????     

基于FLAC3D数值模拟的老采空区剩余沉降量分析计算—以山东枣庄安博化工项目为例

空区的剩余沉降值计算是采空区地质灾害危险程度一种定量分析的方法,利用FLAC3D直接模拟早期采煤形成的老采空区塌陷状态,计算出老采空区的剩余沉降量。以山东枣庄安博化工项目为例,首先采用物探、钻探手段探测老采空区深度、顶板塌落与破碎状况以及地质地层信息,其次结合岩心试验地质材料参数结果进行FLAC3D模拟,计算自重作用下采空区剩余沉降量,以及加载建筑后老采空区剩余沉降值,对比了传统概率积分法计算沉降值,结果基本一致,说明计算方法是可靠的。最后分析加载应力与破碎带剩余沉降值的数量关系。为老采空区土地稳定性评估以及剩余沉降量的计算方法提供科学依据与借鉴。     

A diagnostic analysis on the effect of the residual layer in convective boundary layer development near Mongolia using 20th century reanalysis data

Although the residual layer has already been noted in the classical diurnal cycle of the atmospheric boundary layer,its effect on the development of the convective boundary layer has not been well studied. In this study, based on 3-hourly20 th century reanalysis data, the residual layer is considered as a common layer capping the convective boundary layer. It is identified daily by investigating the development of the convective boundary layer. The region of interest is bounded by(30°–60° N, 80°–120° E), where a residual layer deeper than 2000 m has been reported using radiosondes. The lapse rate and wind shear within the residual layer are compared with the surface sensible heat flux by investigating their climatological means, interannual variations and daily variations. The lapse rate of the residual layer and the convective boundary layer depth correspond well in their seasonal variations and climatological mean patterns. On the interannual scale, the correlation coefficient between their regional averaged(40°–50°N, 90°–110° E) variations is higher than that between the surface sensible heat flux and convective boundary layer depth. On the daily scale, the correlation between the lapse rate and the convective boundary layer depth in most months is still statistically significant during 1970–2012. Therefore, we suggest that the existence of a deep neutral residual layer is crucial to the formation of a deep convective boundary layer near the Mongolian regions.     

环境磁学在城市环境污染监测中的应用和进展

环境磁学是一门介于地球科学、环境科学和磁学之间的边缘科学，已广泛应用于很多领域.本文在简述了环境磁学参数和不同环境中磁性矿物变迁和演化过程的基础上,介绍了环境磁学在城市环境污染的不同方面所取得的进展,探讨了环境磁学在土壤污染和大气等城市环境污染研究中的不足,提出了环境磁学在城市环境污染研究领域的发展趋势.     

陕西省泾惠渠灌区土壤重金属地质累积指数评价

通过对陕西省泾惠渠灌区现场调查及土壤样品的采集,分析了灌区土壤中Hg、Cd、Cr、Pb、As、Cu、Zn等7种元素的含量,应用地质累积指数对灌区土壤进行了评价。结果表明：从区域分布看,阎良区、临潼区、高陵县所属采样点污染较严重;Hg污染最严重,地质累积指数为1.007～3.117,58%的采样点级别为3级,属中度污染到强污染,38%的采样点级别为2级,属中度污染;Zn污染程度次之,地质累积指数为-0.407～1.644,71%的采样点级别为1级,属无污染到中污染;Cd污染变异程度最大,地质累积指数为-2.705～3.312,70%的采样点级别0级,属无污染,但个别采样点达到了强污染;Cu的地质累积指数为-0.535～0.421,Pb为-1.119～-0.144,Cr为-1.005～-0.458,As为-0.562～0.077,除个别点外这些重金属污染级别皆为0级,属无污染。