波浪物理模型试验中风速比尺确定方法初探

在波浪模型试验中研究风对构筑物的作用时,会涉及到风速比尺的确定问题。风对构筑物的作用力包括惯性力和粘滞力,这2种力的大小与建筑物的形态有关,对有的构筑物的作用力以惯性力为主,有的则以粘滞力为主。所以,在波浪物理模型试验中不能简单地采用重力相似准则也不能采用粘滞力相似准则来确定风速比尺。根据大量的试验研究结果,提出了采用不同模型比尺的船舶模型试验来确定风速比尺的方法,为波浪模型试验中风场模拟和数据处理提供了依据。     

海底爆破振动强度衰减规律及中华白海豚保护措施研究

为确保海底爆破施工所诱发的振动不对中华白海豚造成危害,基于量纲分析法对萨道夫斯基经验公式进行修正,建立适用于预测海底爆破质点峰值振动速度的相似准数方程。在此基础上根据现场试验数据进行非线性回归运算,得到相关参数并分析了海底爆破振动强度衰减规律。分析表明:海底爆破质点峰值振速主要由单段装药量、监测点距爆心水平距离、覆盖层厚度及海水深度等因素决定。将参数值分别代入萨氏公式及新建公式计算预测值并进行误差估计,其平均误差分别为20.3%和10.0%,新建公式提高了对质点振速预测的准确性。利用新建公式及超压内安全振速估算保护中华白海豚的安全距离并提出相应的保护措施,为同类工程施工提供理论参考依据。     

基于DFT模型的大场景InSAR图像配准

图像配准是实现干涉合成孔径雷达(InSAR)高精度相位提取及地形高程反演的关键,大场景图像的高效高精度配准成为近年高分宽幅InSAR成像应用研究的难点问题之一。由于大场景图像中不同区域偏移量及变化规律差异较大,传统最大相干系数配准方法需多分块及插值处理,面临计算量大且配准精度低等问题。针对此问题,本文提出一种基于DFT模型的大场景InSAR高效高精度图像配准算法。该方法利用最小均方差准则构建InSAR复图像配准的DFT模型,采用四叉树自适应分块及矩阵相乘DFT快速重采样配准方法,实现大场景InSAR图像各子块区域的高效高精度亚像素配准。仿真和实测数据验证本文算法的有效性,结果表明该算法不仅可实现大场景InSAR复图像亚像素级配准,还具有较高的运算效率,其运算效率相对于传统FFT配准方法通常可提升3倍以上。     

南海北部冬季和夏季逆风流机制初探Ⅱ.季风逆风流产生机制

分析讨论了季风风应力、大陆坡地形及底摩擦在产生季风逆风流的必要条件和间接逆风流诊断判据中的作用；应用季风逆风流必要条件和间接逆风流诊断判据，解释冬季风和夏季风逆风流是如何产生的。结果表明：季风风应力是产生季风逆风流的主导因素；冬季风风应力、大陆坡地形及底摩擦三者联合作用导致表层海水在大陆坡上产生辐合生成高水位带和高动力高度带，在大陆被北侧产生NE向的冬季逆风流，南侧产生SW向顺风流；夏季风风应力、大陆坡地形及底摩擦三者联合作用导致表层海水在大陆坡上产生辐散生成低水位带和低动力高度带，在大陆被北侧产生SW向的夏季逆风流，南侧产生NE向的顺风流；冬季风盛行期间，风致经巴士海峡流入南海的黑潮水，将加速冬季逆风流的形成，加大冬季逆风流的强度；夏季风盛行期间，风应力的作用使巴上海峡以东的黑潮水不能进入南海，即使别的原因令巴上海峡以东的黑潮水流入南海，但高温、高盐的黑潮水对夏季逆风流具有阻扼作用。     

Nitrous oxide production and denitrification rates in estuarine intertidal saltmarsh and managed realignment zones

Increasing concerns over habitat loss and rising costs of sea defence maintenance due to rising sea levels, has seen increases in the practice of managed realignment and reflooding of former reclaimed areas of intertidal saltmarsh and mudflat around the world. These practices are taking place with little knowledge of their impact on soil biogeochemical processes. Rates of denitrification (using the acetylene inhibition technique) and nitrous oxide (N₂O) production were measured from a long-established saltmarsh (SM) and an adjacent, recently re-flooded managed realignment (MR) site comprising former arable land in the estuary of the River Torridge, Devon, UK. Incubations were carried out in closed chambers in which patterns of tidal flooding were simulated automatically. Measurements were made during periods of flood and non-flood over a total of four tidal inundations with estuarine water. During the latter two flooding episodes floodwater was amended with nitrate (NO₃⁻). Nitrous oxide production in the SM soil generally was lower than in the MR soil, with mean values and standard errors over the whole incubation of 0.27 ± 0.16 mg N₂O-N m⁻² h⁻¹ and 0.65 ± 0.15 mg N₂O-N m⁻² h⁻¹ respectively. Denitrification rates demonstrated a similar trend although generally were an order of magnitude higher than N₂O production, with mean rates and standard errors of 2.88 ± 1.12 mg N₂O-N m⁻² h⁻¹ in the SM soil and 3.39 ± 1.16 mg N₂O-N m⁻² h⁻¹ in the MR soil. The data suggest that both soils are net sinks for NO₃⁻ and net sources for N₂O. Both patterns of tidal inundation and floodwater chemistry affect the process rates in each soil differently. The impact of flooding with NO₃⁻ – amended water was greater on the SM soil than the MR soil, and it is likely that decomposing vegetation buried in the accreting sediments following reflooding at the MR site were supplying a source of N in the soil, and so process rates were less dependent upon external supplies. The act of managed realignment in intertidal zones could therefore result in an increase in mean production of N₂O in intertidal zones, at least in the short term.     

Macroscopic criteria for Green type porous materials with spheroidal voids: application to double porous materials

Combined effects of matrix plastic compressibility and void shape are investigated for ductile porous materials. To this end, a spheroidal volume containing a confocal spheroidal (prolate or oblate) void subjected to uniform strain rate boundary conditions has been first studied. A Green type matrix is chosen as a prototype for investigating effects of plastic compressibility. This is carried out by using a kinematics limit analysis theory from which a closed‐form expression of the macroscopic criterion is established for the considered class of materials. These results are then extended to ductile porous materials made up of a green matrix containing randomly oriented spheroidal voids. In the framework of a two‐step homogenization procedure, the obtained results are implemented to describe the macroscopic behavior of double porous materials involving spherical voids at the microscale and randomly oriented and distributed spheroidal voids at the mesoscale. For validation purpose, the new derived criteria are assessed and validated by comparing their predictions to available upper bounds and numerical data from literature. Copyright © 2017 John Wiley & Sons, Ltd.     

新疆乌鲁木齐地区地震水化震例深入剖析

本文在水化前兆清理研究的基础上,采用统一的异常判别方法,应用适合本地区的“异常可靠性评价标准”,对新疆乌鲁木齐地区150km范围内的中强地震和反例事件进行了深入剖析,对水化异常与地震三要素的关系进行了统计分析。研究结果是制定地震水化异常判据和定量化指标的基础。     

岩石压剪性断裂特性及Ⅰ—Ⅱ型复合断裂判据

本文系统阐述了岩石压剪性断裂的特性,认为金属断裂力学复合断裂判据基本上不适用于压剪状态下的岩石斯裂;在此基础上,提出了新的岩石压剪性断裂判据:2COSθ_0/2(cosθ_0-1)[(1+1/f~2)~(1/2)-1]K_Ⅰ+[(sin θ_0/2-3sin 3θ_0/2)(1+1/f~2)~1/2+4sin θ_0/2]K_Ⅱ=4K_(Ⅰc),推导了起始断裂角ψ_0,说明了实验验证结果,指出了该判据在工程地质领域中的应用途径。     

地幔平衡部分熔融和岩浆分离结晶成因岩浆岩的判别

本文在讨论Ⅰ型（地幔平衡部分熔融成因）和Ⅱ型（岩浆分离结晶成因）岩浆岩元素丰度关系公式的基础上，建立了Ⅰ型和Ⅱ型岩浆岩系成因判别公式及判别法则。