确定海洋平台钢裂纹扩展曲线的快速方法

提出了一种确定海洋平台钢裂纹扩展曲线的快速方法。该方法可以综合利用以往的经验数据和当前试验数据确定表面疲劳裂纹扩展速率曲线。与传统的只能利用当前试验数据确定表面疲劳裂纹扩展速率曲线相比。其可利用信息量大幅度增加,所以在精度相同的情况下,可以节省大量试件;而且在试样数一定的情况下。又可大大提高预测精度。文中还给出了海洋平台钢试验对比实例。     

锦州湾沾污沉积物急性毒性的海洋端足类检验

１９９２年９月￣１９９３年１月对锦州湾沾污沉积物的海洋端足类急性毒性效应进行了研究。从锦州湾湾顶到湾口沿西南－－东北方向每２ｋｍ等距离采集２７个表层沉积我校 品,应用海洋端足类Ａ ｍｐｅｌｉｓｃａ ａｂｄｉｔａ对这些样品进行了１０ｄ直流式急性毒性检验,检验指标为死亡率。结果表明,五里河河口处受试生物死亡率最高,为１００％,从湾顶该河口处沿东北方向随着距离增加,死亡率逐渐递减,笔架山处最低,仅为２．     

土的周期加载实验的研究

作者对室内土的周期加载实验进行了较全面的综述。包括实验设备、方法、结果及分析模型 ,并对以后的研究提出建议。随着海上石油的开发及海岸构筑物的建设 ,迫切需要对海底土动力学特性进行研究。掌握目前世界在这一领域的研究现状有助于在高超点上开展创新工作和解关键问题。     

Model tests on installation and extraction of suction caissons in dense sand

A series of model tests were performed on steel- and Perspex-made suction caissons in saturated dense marine sand to explore installation and extraction behaviors. The extractions of the caisson were conducted by applying monotonic loading or by pumping water into the caisson. Responses of suction caissons to pullout rates, aspect ratios, and extraction manners were examined. Test results show that a cone-shaped subsidence region occurs around the suction caisson during the suction-assisted installation. The pullout bearing capacity of the suction caisson in sand is dominated by the loading rate and the loading manner. For the suction caisson subjected to monotonic loading, the maximum bearing capacity is reached at the pullout rate of about 20.0?mm/s. The mobilized vertical displacement corresponding to the pullout capacity increases with increasing the pullout rate. The passive suction beneath the suction caisson lid reaches the maximum value when the pullout bearing capacity is mobilized. In addition, during the suction caisson extracted by pumping water into the caisson, the maximum pore water pressure in the caisson is obtained under the displacement of approximately 0.04 times the caisson diameter. The absolute values of the maximum pore water pressures for the suction caissons approximately equal those of the maximum vertical resistances at the monotonic pullout rate of 5 mm/s. When the vertical displacements of the suction caissons with the aspect ratio of 1.0 and 2.0 reach 0.92 and 1.77 times the caisson diameter, respectively, the seepage failure occurs around the caissons. Using a scaling method, the test results can be used to predict the time length required for the prototype suction caisson to be extracted from the seabed.     

海上试验场潮流能发电装置综合测试与评价方法分析(英文)

开展潮流能装置实海况试验、检测与评价方法研究,对海洋高科技成果的转化、海洋可再生能源开发提供了科学、有效的技术保障。文章通过对潮流能装置的功率输出特性、年发电量、能量转换效率三项核心指标进行分析,提出指标的测试内容和评价方法,为实现潮流能海上试验与测试场建设提供技术依据;并根据对海上风电场的研究,提出了海上试验场潮流能装置的电能质量测试与评估方法;给出潮流能装置安全准入的测试内容,全面评估试验场潮流能装置的运行状态。     

An experimental investigation into the influence of the damage openings on ship response

Ship motions after damage are difficult to evaluate since they are affected by complex phenomena regarding fluid and structures interactions. The possibility to better understand how ship behavior in damage is influenced by these phenomena is important for improving ship safety, especially for passenger vessel.In this paper an experimental campaign is carried out on a passenger ferry hull, to show the effects of the water dynamics across damage openings on ship motions. Novel aspects of this research include the study of the effects of the damage position on the ship roll response. The study is carried out for still water and for beam regular waves at zero speed.Results from the experiments carried out underline that the roll behavior of a damaged ship is affected by the position of damage opening and not only by its size. Assuming the same final equilibrium conditions after flooding but characterized by different damage openings it is possible to observe how motions RAOs and roll decay characteristics modify according to the opening locations.     

Large scale three-dimensional seepage analysis model test and numerical simulation research on undersea tunnel

During the construction process of Qingdao Jiaozhou Bay Undersea Tunnel, the faults and other unfavorable geological discontinuities were often encountered. To study the water inrush mechanism in the faults, both physical model test and numerical analysis were carried out. The results of crown displacement and hydraulic pressure of the monitoring sections in the physical model and numerical model were analyzed in this paper. It was found that the displacement and hydraulic pressure in the process of tunnel construction are often interacted as both cause and effect, and the lower of hydraulic pressure is often accompanied with the growth of its displacement. The changing of the excavation disturbed zone during the excavation in the undersea tunnel was also studied. The results show that the excavation disturbed zone in fault is larger than that in surrounding rock mass, and the excavation disturbance effects in the filling type fault are both transient and persistent. When the displacement and hydraulic pressure in the undersea tunnel change sharply during excavation, there are relatively slow and continuous change trend of the displacement and hydraulic pressure. For practical purposes, to prevent water inrush in the undersea tunnel, more attentions should also be paid to the undersea tunnel after excavation.     

半潜平台浮子式系泊系统参数优化研究

通过在系泊缆中设置浮子可以改善系泊系统性能,降低平台运动响应。建立浮子式系泊系统的数值计算模型,验证浮子式系泊系统数值计算方法,详细分析浮子设计参数(设置位置和净浮力大小)变化对系泊缆张力特性与平台运动的影响规律,并根据得到的规律选择了优化的浮子系泊系统方案。最后对优化方案进行评估,表明优化方案可以显著降低系泊中的平台水平运动,尤其是低频运动,同时系泊缆张力变化不大,仍满足安全要求。研究结果可为今后浮子式系泊系统设计提供参考。     

Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

基于LabVIEW的自升沉式潜标模拟测试系统设计

自升沉式潜标正式布放使用前应进行大量的测试试验工作。为了能够在岸边或实验室对潜标的各项性能进行验证和调试工作,开发了基于LabVIEW的潜标模拟测试系统。该系统充分利用虚拟仪器的特点,采用模块化编程技术,利用软件模拟潜标在水下的各种运动状态及传感器感应的测量参数变化,或通过对现场测量数据的回放查找分析潜标系统本身存在的缺陷,实现潜标不下水或少下水就可以进行全面测试的目的。实验结果表明,利用模拟测试系统可以进行固定值、极值和连续变化值模拟,能够缩短设备开发周期,优化系统控制方案,对提高产品质量具有非常重要的作用。