物理实验中的不确定度评定

阐述了不确定度的定义、来源、分类及用不确定度评定测量结果的一些表示方法。分析了误差和不确定度的区别。最终给出了测量不确定度的评定。     

GPS广播星历参数拟合算法

介绍了GPS广播星历参数的最小二乘估计方法。推导了相应的计算公式。计算结果表明。文中给出的公式是正确的，其拟合精度以用户距离误差(URE)示时，对预报轨道的损失小于1cm。     

基于典型相关分析的变化检测中变化阈值的确定

以东营市为例 ,把基于典型相关分析的方法运用于多时相遥感影像的变化检测中。对于变化阈值的确定 ,采用了一种基于贝叶斯理论的最小错误率的方法。这种方法实质上是一种非监督分类的方法 ,即不需要地面实况数据或其它先验知识 ,直接对典型相关处理后的差值图像进行分析计算得到阈值 ,使变化检测的错误率达到最小。实验结果证明了这种方法的有效性。     

Probabilistic approach for active control of structures: experimental verification

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.     

Analytical exploration of γ-function explicit method for pseudodynamic testing of nonlinear systems

It has been well studied that the γ-function explicit method can be effective in providing favorable numerical dissipation for linear elastic systems. However, its performance for nonlinear systems is unclear due to a lack of analytical evaluation techniques. Thus, a novel technique is proposed herein to evaluate its efficiency for application to nonlinear systems by introducing two parameters to describe the stiffness change. As a result, the numerical properties and error propagation characteristics of the γ-function explicit method for the pseudodynamic testing of a nonlinear system are analytically assessed. It is found that the upper stability limit decreases as the step degree of nonlinearity increases; and it increases as the current degree of nonlinearity increases. It is also shown that this integration method provides favorable numerical dissipation not only for linear elastic systems but also for nonlinear systems. Furthermore, error propagation analysis reveals that the numerical dissipation can effectively suppress the severe error propagation of high frequency modes while the low frequency responses are almost unaffected for both linear elastic and nonlinear systems.     

Effects of calculation procedure and sampling site on trap method estimates of sediment resuspension in a shallow lake

Resuspension estimates given by two different trap methods in a shallow lake were compared. The sensitivity of the methods to errors in estimates of gross sedimentation and organic fraction of trapped material was explored. The methods were label method, in which resuspension is estimated by determining the organic fraction of surface sediment, suspended seston and trapped material, and SPIM/SPM method, where the relationship between settling particulate inorganic matter (SPIM) and total settling particulate matter (SPM) is used. During the whole 111 day study period, according to the label method, at a sheltered station 1949 g m⁻² dry weight of sediment was resuspended, whereas SPIM/SPM gave an estimate of 1815 g m⁻². The difference in the estimates was probably due to mineralization loss of organic material in the traps during the two week exposure periods. Sensitivity analysis showed that of the two methods, the label method was more sensitive to variations in the organic content of trapped material. At a wind-exposed station, the total amounts of resuspended matter given by the label method and by the SPIM/SPM method were 4966 g m⁻² and 4971 g m⁻², respectively. Due to wind effects, escape of trapped material took place, which caused underestimation of gross sedimentation and compensated the effects of mineralization loss to diminish the difference between the methods. Of the two methods, the SPIM/SPM method seems thus more suitable for lakes, where bacterial activity is high. If cyanobacterial blooms take place, the label method is probably more reliable, providing that the exposure time of sediment traps is kept adequately short.     

主检测深线系统误差的探测与实现

针对海道测量中测深成果系统误差的评价问题,介绍了一种利用主、检测深线测深数据探测系统误差的方法,以实现测深中系统误差的科学评估。     

地表覆盖分类成果质量特征分析

自我国全面建成地理国情普查成果库之后,工作重心由全面普查变为重点监测。不论普查还是监测,准确地对地表覆盖进行分类一直是工作的重点和难点。在常态化监测阶段,把握地表覆盖分类成果的主要质量指标,归纳其诸如变化率、变化区域分布、变化类型,分析影响其成果质量的主要因素,对监测生产组织及质量控制具有非常重要的作用。     

无人机倾斜摄影与LiDAR融合监测技术

本文以成都市环城生态区生态修复项目为依托,利用飞马D200无人机实现了倾斜摄影和LiDAR技术的融合监测,通过三维模型制作、大比例尺地形图生产、点云处理、方格网计算、精度评定等步骤,验证了倾斜摄影和机载LiDAR协同监测方式可以满足1∶500地形图和方格网测量的精度,对后期无人机测绘实际生产具有指导意义。     

岩土压力传感器匹配误差的特性

在介绍了岩土压力传感器匹配误差概念的基础上,论述了匹配误差的稳定性、等效性、真实性和实用性以及各特性之间的相关性。通过研究得出：匹配误差特性的核心是稳定性;传感器刚性饼状设计是保证稳定性的必要条件;等效匹配误差不一定是真实的,但即使是不真实,也不影响实用性。