吉林台爆破料应力应变关系的三轴试验研究

通过室内大型三轴实验，研究了吉林台水库爆破料在不同级配下的应力应变关系，得到了在一定击实功下爆破料的最大干密度随细料含量变化的规律，分析了爆破料在不同级配和不同围压下应力与应变的变化规律、轴向应变与体积应变的关系及抗剪强度变化特性．从微观的角度说明了变化规律产生的原因，得出爆破料的抗剪强度随级配的变化而变化的规律．     

绿片岩三轴流变力学特性的研究(Ⅰ):试验结果

为了解锦屏一级水电站坝基绿片岩的流变力学特性，采用岩石全自动流变伺服仪对绿片岩进行了三轴压缩流变试验。基于试验结果，研究了绿片岩在不同围压作用下的轴向应变以及侧向应变随时间的变化规律，讨论了流变特性对岩石应力一应变曲线的影响，探讨了不同应力水平下的轴向以及侧向流变速率变化趋势，分析了不同围压下流变的破裂机制，掌握了绿片岩三轴流变的基本规律，从而为该水电站工程流变数值分析时参数的辨识提供了可靠的依据。     

房产测绘平面图系统的实现研究

随着城市规划管理的不断发展．使得城市房产测绘单位采用大型空间数据库管理测绘平面图资料成为必然。通过建立房产测绘平面图系统，可以有效地解决数据标准不一致．图数不能互访，测绘各部门无法协调一致等问题，充分发挥网络功能，提升整个城市的房产管理水平．达到房产管理和房产服务一体化的目标。本文详细论述了房产测绘平面图系统的概念、设计原则和系统功能．在南京数字房产共享平台的建设中得到了实现．并取得了良好的效果。     

Pseudodynamic tests on rubber base isolators with numerical substructuring of the superstructure and strain‐rate effect compensation

A pseudodynamic testing procedure has been applied by which the seismic response of a base‐isolated building is obtained by using as specimen the isolators, while the superstructure is numerically simulated. The procedure also takes advantage of the continuous pseudodynamic testing capabilities of the ELSA laboratory, which increase the accuracy of the results and reduce the strain‐rate effect of the rubber bearings. A simple proportional correction of the measured forces compensates the remaining strain‐rate effect due to the unrealistic speed of the test. The correction factor is obtained by means of a characterizing test on the specific rubber isolators. The developed method has been successfully applied to the prediction of the seismic response of a base‐isolated four‐storey building submitted to several specified accelerograms. The results for those earthquakes as well as the effects of some changes of the parameters of the system are discussed. Copyright © 2002 John Wiley & Sons, Ltd.     

The Mw = 6.0, 7 September 1999 Athens Earthquake

On 7 September 1999 at 11:56 GMT a destructive earthquake (M_w = 6.0) occurred close to Athens (Greece). The rupture process is examined using data from the Cornet local permanent network, as well as teleseismic recordings. Data recorded by a temporary seismological network were analyzed to study the aftershock sequence. The mainshock was relocated at 38.105°N, 23.565°E, about 20 km northwest of Athens. Four foreshocks were also relocated close to the mainshock. The modeling of teleseismic P and SH waves provides a well-constrained focal mechanism of the mainshock (strike = 105°, dip = 55° and rake = -80°) at a depth of 8 km and a seismic moment M₀ = 1.010²⁵ dyn·cm. The obtained fault plane solution represents normal faulting indicating an almost north-south extension. More than 3500 aftershocks were located, 1813 of which present RMS < 0.1 s and ERH, ERZ < 1.0 km. Two main clusters were distinguished, while the depth distribution is concentrated between 2 and 11 km. Over 1000 fault plane solutions of aftershocks were constrained, the majority of which also correspond to N–S extension. No surface breaks were observed but the fault plane solution of the mainshock is in agreement with the tectonics of the area and with the focal mechanisms obtained by aftershocks. The hypocenter of the mainshock is located on the deep western edge of the fault plane. The relocated epicenter coincides with the fringe that represents the highest deformation observed on the differential interferometric image. The calculated source duration is 5 sec, while the estimated dimensions of the fault are 15 km length and 10 km width. The source process is characterized by unilateral eastward rupture propagation, towards the city of Athens. An evident stop phase observed in the recordings of the Cornet local stations is interpreted as a barrier caused by the Aegaleo Mountain.     

An experimental study of grain scale melt segregation mechanisms in two common crustal rock types

Creation of pathways for melt to migrate from its source is the necessary first step for transport of magma to the upper crust. To test the role of different dehydration‐melting reactions in the development of permeability during partial melting and deformation in the crust, we experimentally deformed two common crustal rock types. A muscovite‐biotite metapelite and a biotite gneiss were deformed at conditions below, at and above their fluid‐absent solidus. For the metapelite, temperatures ranged between 650 and 800 °C at P_c=700 MPa to investigate the muscovite‐dehydration melting reaction. For the biotite gneiss, temperatures ranged between 850 and 950 °C at P_c=1000 MPa to explore biotite dehydration‐melting under lower crustal conditions. Deformation for both sets of experiments was performed at the same strain rate (ε.) 1.37×10^?5 s^?1. In the presence of deformation, the positive ΔV and associated high dilational strain of the muscovite dehydration‐melting reaction produces an increase in melt pore pressure with partial melting of the metapelite. In contrast, the biotite dehydration‐melting reaction is not associated with a large dilational strain and during deformation and partial melting of the biotite gneiss melt pore pressure builds more gradually. Due to the different rates in pore pressure increase, melt‐enhanced deformation microstructures reflect the different dehydration melting reactions themselves. Permeability development in the two rocks differs because grain boundaries control melt distribution to a greater extent in the gneiss. Muscovite‐dehydration melting may develop melt pathways at low melt fractions due to a larger volume of melt, in comparison with biotite‐dehydration melting, generated at the solidus. This may be a viable physical mechanism in which rapid melt segregation from a metapelitic source rock can occur. Alternatively, the results from the gneiss experiments suggest continual draining of biotite‐derived magma from the lower crust with melt migration paths controlled by structural anisotropies in the protolith.     

Fluid permeability of sedimentary rocks in a complete stress–strain process

The permeability of sedimentary rocks during triaxial compression tests was investigated to relate it to the complete strain–stress process. It was found that the permeability was not constant, but varied with the stress and strain states in the rocks. Prior to the peak strength, the permeability decreases with increasing load. A dramatic increase in permeability occurs during the strain softening period. In the present study, in situ measurements of fluid flow and pressure in floor strata was carried out in a double longwall mining face in the Yangzhuang colliery. These measurements show that both the strata pressure and the position with respect to the mining face influence the hydrogeologic properties. The permeability increased in the floor strata behind the mining face because those mining induced fractures opened as the strata pressure decreased. To better understand this change in hydraulic behavior around the mining faces, 3-D numerical modeling was carried out. The model provides the general picture of the stress distribution and failure zone both in the floor and roof strata. The field and model results demonstrate the importance of changes in the stress and strain states on the hydrogeology of a site.     

圆弧状沉积盆地与软土单覆盖层出平面地表运动对比

采用解析方法，通过圆弧状沉积盆地与同样参数的软土均匀单覆盖层的对比，研究沉积盆地对平面SH波二维散射效应和其出平面地表运动。数值对比结果表明：（1）波垂直入射时盆地中央地表位移幅值反应，其随频率变化形式与软土单覆盖层的地表运动有较强的对应性，且此时单覆盖层地表位移幅值为其下降；（2）盆地的二维散射效应特点显著波的汇聚作用使盆地中的地表运动显著放大，总体上较软土单覆盖层的地表位移幅值要大，其频域内的最大反应则明显大于单覆盖层情况，但最大反应在盆地表面出现的位置依赖于入射波角度、盆地深宽比和盆地的软硬程度；（3）沉积盆地中地表位移运动有强烈扭转效应，且随盆地变软和入射波频率增高而增强。