一种改进的周跳多项式拟合方法

多项式拟合探测周跳受相位观测值所含误差的影响,随着采样数的增加,其探测周跳的能力随之降低,通常将观测数据分成若干段来进行处理。这样不可避免的增加工作强度,降低工作效率。本文根据多项式拟合探测周跳的基本原理,对多项式进行改进。经实验证明,利用改进后的多项式进行拟合能够有效地弥补传统方法的不足,使周跳的探测与修复更加稳定可靠。     

多频载波相位组合进行单点定位

不同于双频数据的应用,多频数据的采用对单点定位有着特殊意义,可以更好地获得其模糊度的解。基于卫星导航定位系统多频载波相位线性组合理论,研究了具有特殊意义的组合观测值及其特性。在此基础上,通过多频观测值数据的数值仿真,采用新方法进行整周模糊度快速求解。编制了基于多频载波相位组合单点定位软件,通过结果的比较分析,得出有一定实际应用意义的结论。此方法算法简单,速度快,能够满足实时导航定位的需要,具有工程应用价值。     

CA-AR模型在人口空间场属性变化模拟中的应用

本文结合CA(cellular automata)和AR(auto-regression)提出模拟人口空间场属性变化的CA-AR模型,以1991～2006年成都市各区、县市的人口统计数据和成都市行政区划图为基础,将行政单元转化为单元网格,分别建立成都市主城区各单元格的CA-AR模型。结果显示,模拟结果的绝对误差和相对误差都较小,模拟精度较高,模型的显著性水平都比较高,说明CA-AR模型用于模拟人口空间场的人口数量变化是可行的。     

“深空大地测量导论”课程建设和教材编写的思考

介绍了"深空大地测量学导论"课程教材编写的背景、阐述了"深空大地测量学导论"教材编写的基本思路、总结了"深空大地测量学导论"教材的编写的特色.     

四元体系Na~ ∥Cl~-,CO_3~(2-),B_4O_7~(2-)-H_2O 273K介稳相平衡研究

采用等温蒸发法研究简单四元体系Na ∥Cl-,CO32-,B4O72--H2O273K时的介稳相平衡,并测定该体系273K平衡液相中各组分的溶解度及密度,该体系的介稳相图和密度组成图显示:该四元体系在273K时的相图由3条溶解度单变量线、3个结晶区及1个共饱和点组成。体系属简单共饱型,无复盐或固溶体形成,3个结晶区分别对应单盐Na2CO3·10H2O,NaCl和Na2B4O7·10H2O。共饱点E处于Na2CO3·10H2O,NaCl及Na2B4O7·10H2O3盐共饱和,所对应的平衡液相组成为w(Na2CO3)=6.81%,w(NaCl)=21.69%,w(Na2B4O7)=0.65%,w(H2O)=70.85%。研究体系在273K下,Na2CO3·10H2O是碳酸钠盐的唯一析出形式,且硼酸钠对碳酸钠有盐析作用。     

相控建模技术在羊二庄油田的应用

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.     

A framework of region-based spatial relations for non-overlapping features and its application in object based image analysis

Object based image analysis (OBIA) is an approach increasingly used in classifying high spatial resolution remote sensing images. Object based image classifiers first segment an image into objects (or image segments), and then classify these objects based on their attributes and spatial relations. Numerous algorithms exist for the first step of the OBIA process, i.e. image segmentation. However, less research has been conducted on the object classification part of OBIA, in particular the spatial relations between objects that are commonly used to construct rules for classifying image objects and refining classification results. In this paper, we establish a context where objects are areal (not points or lines) and non-overlapping (we call this “single-valued” space), and propose a framework of binary spatial relations between segmented objects to aid in object classification. In this framework, scale-dependent “line-like objects” and “point-like objects” are identified from areal objects based on their shapes. Generally, disjoint and meet are the only two possible topological relations between two non-overlapping areal objects. However, a number of quasi- topological relations can be defined when the shapes of the objects involved are considered. Some of these relations are fuzzy and thus quantitatively defined. In addition, we define the concepts of line-like objects (e.g. roads) and point-like objects (e.g. wells), and develop the relations between two line-like objects or two point-like objects. For completeness, cardinal direction relations and distance relations are also introduced in the proposed context. Finally, we implement the framework to extract roads and moving vehicles from an aerial photo. The promising results suggest that our methods can be a valuable tool in defining rules for object based image analysis.     

GPS signal acquisition using the repeatability of successive code phase measurements

This paper introduces a new method for GPS signal acquisition, which is based on the repeatability of successive code phase measurements and the M-of-N search algorithm. The performance of the proposed method in terms of probability of signal detection is similar to that of traditional methods, except that the calculation of the probability of detection does not rely on the noise distribution or the Carrier-to-Noise ratio (C/N₀). The code phase repeatability-based method is presented along with equations for probability of detection and probability of false detection. If the distribution of the noise is known, it also provides an estimate of the C/N₀. The proposed method is illustrated for coherent and non-coherent acquisition and C/N₀ estimation.     

Multi-Scale Texture Modeling

Patterns of crystallographic preferred orientation are referred to as texture. The specific subject of texture analysis is the experimental determination and interpretation of the statistical distribution of orientations of crystals within a specimen of polycrystalline material, which could be metals or rocks. The objective is to relate an observed pattern of preferred orientation to its generating processes and vice versa. In geosciences, texture of minerals in rocks is used to infer constraints on their tectono-metamorphic history. Since most physical properties of crystals, such as elastic moduli, the coefficients of thermal expansion, or chemical resistance to etching depends on crystal symmetry and orientation, the presence of texture imparts directional properties to the polycrystalline material. A major issue of mathematical texture analysis is the resolution of the inverse problem to determine a reasonable orientation density function on SO(3) from measured pole intensities on , which relates to the inverse of the totally geodesic Radon transform. This communication introduces a wavelet approach into mathematical texture analysis. Wavelets on the two-dimensional sphere and on the rotational group SO(3) are discussed, and an algorithms for a wavelet decomposition on both domains following the ideas of Ta-Hsin Li is given. The relationship of these wavelets on both domains with respect to the totally geodesic Radon transform is investigated. In particular, it is shown that the Radon transform of these wavelets on SO(3) are again wavelets on . A novel algorithm for the inversion of experimental pole intensities to an orientation density function based on this relationship is developed.     

杠杆点评估及设计空间抗差

本分析了杠杆点的几何含义和统计特征,从杠杆点的保差性,矩阵的摄动和参数估值可靠性的观点出发讨论了杠杆点的不利和有利的两个方面,提出了一个全面的设计空间抗差方案。