基于转台的中场区InSAR三维成像技术研究

在中场区通过对相位弯曲补偿进行微波成像,能大大降低对测试距离的要求,本文依据干涉逆合成孔径雷达成像(InSAR)原理,提出中场区滤波-逆投影三维成像算法,在获得目标散射点二维分布和强度信息的同时,还能得到其高度信息,实现中场区目标的三维成像。仿真和实验结果表明算法的有效性。     

开挖过程及围护结构对地铁车站抗震性能的影响

为了研究开挖工序以及围护结构作为永久结构在明挖车站的抗震设计校核中的作用,基于以灌注桩作为支挡结构的郑州市某明挖结构地铁站,采用Plaxis2D建立二层单柱双跨矩形框架式有限元模型,采取硬化土本构,建立考虑分步开挖、和不考虑开挖的模型,进行有无围护墙及不同墙厚抗震验算.研究结果表明:侧墙作为主要抗侧力构件,在地震荷载作...     

InSAR滑坡探测技术研究——以金沙江乌东德水电站段为例

采用3类InSAR产品和DEM数据开展金沙江流域乌东德水电站段的潜在滑坡探测,成功识别出多处已知和未知的滑坡点,并探测出滑坡体的形态及稳定性,提供了一种高效的大范围滑坡探测技术。同时采用小基线集InSAR技术对金坪子滑坡进行监测,不仅获得该滑坡的空间分区特征,也获取重点滑坡区的时间序列结果,并且与地面监测结果比较,精度达1.8 cm。展示了不同InSAR技术在不同尺度滑坡调查与监测中的应用特点。     

Micromechanical viscoelasto‐plastic models and finite element implementation for rate‐independent and rate‐dependent permanent deformation of stone‐based materials

This paper presents parallel and serial viscoelasto‐plastic models to simulate the rate‐independent and the rate‐dependent permanent deformation of stone‐based materials, respectively. The generalized Maxwell viscoelastic and Chaboche's plastic models were employed to formulate the proposed parallel and serial viscoelasto‐plastic constitutive laws. The finite element (FE) implementation of the parallel model used a displacement‐based incremental formulation for the viscoelastic part and an elastic predictor—plastic corrector scheme for the elastoplastic component. The FE framework of the serial viscoelasto‐plastic model employed a viscoelastic predictor—plastic corrector algorithm. The stone‐based materials are consisted of irregular aggregates, matrix and air voids. This study used asphalt mixtures as an example. A digital sample was generated with imaging analysis from an optically scanned surface image of an asphalt mixture specimen. The modeling scheme employed continuum elements to mesh the effective matrix, and rigid bodies for aggregates. The ABAQUS user material subroutines defined with the proposed viscoelasto‐plastic matrix models were employed. The micromechanical FE simulations were conducted on the digital mixture sample with the viscoelasto‐plastic matrix models. The simulation results showed that the serial viscoelasto‐plastic matrix model generated more permanent deformation than the parallel one by using the identical material parameters and displacement loadings. The effect of loading rates on the material viscoelastic and viscoelasto‐plastic mixture behaviors was investigated. Permanent deformations under cyclic loadings were determined with FE simulations. The comparison studies showed that the simulation results correctly predicted the rate‐independent and rate‐dependent viscoelasto‐plastic constitutive properties of the proposed matrix models. Overall, these studies indicated that the developed micromechanical FE models have the abilities to predict the global viscoelasto‐plastic behaviors of the stone‐based materials. Copyright © 2009 John Wiley & Sons, Ltd.     

Effectiveness of simple approaches in mitigating residual deformations in buildings

Developments in performance‐based seismic design and assessment approaches have emphasized the importance of considering residual deformations. Recent investigations have also led to a proposed direct displacement‐based design (DDBD) approach which includes an explicit consideration of the expected residual deformations as an integral part of the design process. Having estimated the expected residual deformations in a structure, engineers are faced with the problem of reducing them to meet the targeted performance levels under pre‐defined seismic hazard levels. Previous studies have identified the post‐yield stiffness as a primary factor influencing the magnitude of residual deformations in single degree of freedom and multiple degree of freedom structures. In this paper, a series of simple approaches to increase the post‐yield stiffness of traditional framed and braced systems for the purpose of reducing residual deformations are investigated. These methods do not utilize recentring post‐tensioned technology. This contribution addresses the feasibility of altering the lateral post‐yield stiffness of structural systems by: (i) using different reinforcement materials with beneficial features in their stress–strain behaviour; (ii) re‐designing the section geometry and properties of primary seismic‐resisting elements; and (iii) introducing a secondary elastic frame to act in parallel with the primary system. The efficiency of each of these techniques is investigated through monotonic and cyclic moment‐curvature and non‐linear time‐history analyses. Of these approaches the design and introduction of an elastic secondary system was found to be most effective and consistent in reducing residual deformations. A simplified design approach for achieving the desired increase of a system's post‐yield stiffness is also presented. Copyright © 2007 John Wiley & Sons, Ltd.     

A Reliability Based Expert System for Assessment and Mitigation of Landslides Hazard Under Seismic Loading

Different models were developed for evaluating the probabilistic three-dimensional (3-D) stability analysis of earth slopes and embankments under earthquake loading using both the safety factor and the displacement criteria of slope failure.The probabilistic models evaluate the probability of failure under seismic loading considering the different sources of uncertainties involved in the problem. The models also take into consideration the spatial variabilities and correlations of soil properties. The developed models are incorporated in a computer program PTDDSSA.These analysis/design procedures are incorporated within a code named SARETL developed in this study for stability analysis and remediation of earthquake triggered landslides. In addition to the dynamic inertia forces, the system takes into consideration local site effects.The code is capable of assessing the landslide hazard affecting major transportation routes in the event of earthquakes and preparing earthquake induced landslide hazard maps (i.e., maps showing expected displacements and probability of slope/embankments failure) for different earthquake magnitudes and environmental conditions. It can also beused for proposing a mitigation strategy against landslides.     

用InSAR技术从雷达图像获取DEM的质量控制

该文阐述利用InSAR技术生成DEM的过程,比较使用不同参数处理ERS数据所获得的不同试验结果,分析了产生差异的因素,为提高处理结果精度进行了有益的尝试,最后总结出干涉处理过程中影响结果精度的三个主要因素和关键点。     

InSAR观测值大气改正方法的研究进展

介绍了国际上InSAR观测值大气改正方法最新的研究进展，应用实例证明了由于大气（尤其是水汽）的影响，传统的InSAR形变量的监测精度往往只能限制在cm级；而利用GPS数据，通过基于地形的GPS扰动模型（GTTM），大幅度削弱了大气对干涉影像的影响，并成功地探测出了美国洛杉矾地区明显的季节性地表形变，形变量精度可提高到5mm左右。通过与GPS／MODIS集成大气改正模型的结果的比较表明，GTTM和GPS／MODIS两种大气改正模型在削弱InSAR观测值大气水汽影响方面具有很强的互补性。