海岸工程中海浪数值模拟和环境参数选取的进展

主要介绍了我国近的来在海岸工程设计，建设中有关海浪数值模拟及环境参数选取方面的研究进展。     

地震折射波的虚拟射线理论及其应用

本文提出了一种地震折射液的虚拟射线理论,根据该理论,只要已知地表层的速度,即可直接由折射波信息提取地震参数,从而可实现折射界面的反演。 文中通过实际介质模型的计算机实验结果,验证了该理论的正确性。     

无人船运动控制方法综述

为实现无人船海上自主作业,无人船运动控制的快速性、准确性以及鲁棒性亟待提高。首先从全驱动控制和欠驱动控制角度,分别概括了国内外无人船航向控制、航速控制、轨迹跟踪控制以及路径跟踪控制的主流控制方法。其次,归纳总结了处理海洋环境不确定扰动的研究进展,包括扰动的建模和消除、抑制扰动的主流方法。最后,总结了无人船运动控制现状与存在的问题,并从工程应用和理论研究两个角度对未来的研究方向进行了展望。     

两次强降水风暴双偏振参量特征分析

基于济南S波段双偏振多普勒天气雷达探测数据,结合探空和地面实况资料,对2019年同一区域两次强降水风暴双偏振参量特征进行分析。结果表明:1)两次对流性强降水发生在弱垂直风切变环境下,具有较强的对流有效位能,低层湿度较大,0℃层高度较高,利于短时强降水的产生。2)两次强降水风暴都具有低质心热带降水特征,45 dBZ以上的强回波区主要位于环境0℃层高度之下。3)风暴低层强回波区都对应大的差分反射率因子Z_(DR)和比差分相位K_(DP),Z_(DR)≥0.5 dB,K_(DP)≥0.5°·km~(-1),相关系数CC≥0.95;反射率因子在50～54 dBZ之间,对应的K_(DP)1.0°·km~(-1),CC≥0.97,Z_(DR)适中,是两次强降水风暴导致高强度降水的主要双偏振参量特征。4)两次强降水风暴Z_(DR)柱和K_(DP)柱高度存在明显差异,7月27日强降水风暴前侧出现Z_(DR)柱和K_(DP)柱,高度接近-10℃层高度,8月10日强降水风暴Z_(DR)柱和K_(DP)柱略高于0℃层高度,Z_(DR)柱高度对雷暴强度具有指示作用。     

Bowen数和东中国海Bowen数分布

本文讨论Bowen数的意义、功能和计算法。同时,依据多年水文气象实测资料作统计,计算出东中国海的Bo值。其结果绘制成1月至12月的月平均分布图,从而对本海域的Bo分布特点作详细分析介绍。     

SAS测量水体表观光学参数的方法

SeaWiFS航空模拟器（SAS）是专门为在水面之上测量水体表观光学参数的现场设备。文章在介绍SAS现场测量以及数据处理基本方法的基础上，分析了2002年黄海试验SAS的应用效果，并与剖面法测量数据进行了比对。     

季节内SST和混合层深度变化的模式研究

用Niiler—Kraus类型的混合层积分模式,对TOGA—COARE强化观测期间由《实验3号》科学考察船观测资料得到的混合层深度和SST在季节内时间尺度的变化进行了模式研究。指出:1.混合层耗散参数与较长时间尺度过程风应力的变化存在着比较好的对应关系;2.模式可以较好的对风场和热通量场在季节内时间尺度的变化作出响应,模拟出季节内时间尺度SST的变化;3.Niiler,-Kraus模式在考虑耗散作用后,可用于海洋季节内时间尺度变化的模式研究。     

利用地下水水位资料推求水文地质参数

依据模糊集合理论,提出了反求水文地质参数的一种新方法,即用模糊模式识别评价计算水位与观测水位的拟合程度,依模糊ISODATA聚类法的原理建立目标函数,以相应的聚类中心作为要求的水文地质参数。     

A straightforward approach for using single time domain simulations to assess characteristic extreme responses

Short-term wave design approach of marine structures, using nonlinear time domain simulations, is a design procedure that is recognized by various modern standard codes. One of the most challenging points of this approach is the evaluation of the characteristic extreme values for response parameters used in the design check equations. The most straightforward and recommended way to evaluate a response characteristic value is by fitting an extreme value probability distribution to the N-sample of extreme values extracted from N independent time domain simulations with duration equal to the short-term period indicated by the code, which is usually taken as 3 h. However, this procedure would not be practical for some types of marine structures, such as risers and mooring lines, under numerous design load cases and demanding huge finite element models. A more feasible approach would be to assess the response extreme value distribution using only a single short-term time domain simulation with duration shorter than 3 h. But reduced time simulations always introduce some additional statistical uncertainty into the extreme values estimates. This paper discusses a workable way of properly taking into account the statistical uncertainty associated with the simulation length in the assessment of a characteristic short-term extreme response value based on a single time series.     

Wave runup on a concentric twin perforated circular cylinder

The regular wave interaction with a twin concentric porous circular cylinder system consisting of an inner impermeable cylinder and an outer perforated cylinder was studied through physical model and numerical model studies. The experiments were carried out on the twin concentric cylinder model in a wave flume to study the wave runup and rundown at the leading and trailing edges of the perforated cylinder. It was found that the maximum wave runup on the perforated cylinder is almost same as the incident wave height. The experimental results were used to develop the predictive formulae for the wave runup and rundown on the perforated cylinder, which can be easily used for design applications. The wave runup profiles around the perforated cylinder for different values of ka and porosities were studied numerically using Green's Identity Method. The results of the numerical study are presented and compared with the experimental measurements.