Superimposed folding and thrusting by two phases of mutually orthogonal or oblique shortening in analogue models

Orogens may suffer more than one phase shortening resulting in superposition of structures of different generations. Superimposition of orthogonal or oblique shortening is studied using sandbox and centrifuge modelling. Results of sand models show that in orthogonal superimposition, the two resulting structural trends are approximately orthogonal to each other. In oblique superimposition, structures trend obliquely to each other in the relatively thin areas of the model (foreland), and mutually orthogonal in areas where the model is thickened during the first phase of shortening (i.e. the hinterland). Thrusts formed during the first shortening phase may be reactivated during the later shortening phase. Spacing of the later phase structures is not as wide as expected, considering they across the pre-existing thickened wedge. Superposition of structures results in formation of type 1 fold interference pattern. Bedding is curved outwards both in the dome and basin structures. Folded layers are dipping and plunging outwards in a dome, while they are dipping and plunging inwards in a basin. In the areas between two adjacent domes or basins (i.e. where an anticline is superimposed by a syncline or a syncline is superimposed by an anticline), bedding is curved inwards, and the anticlines plunge inwards and the synclines outwards. The latter feature could be helpful to determine the age relationship for type 2 fold interference pattern. In tectonic regions where multiple phases of shortening have occurred, the orogenic-scale dome-and-basin and arrowhead-shaped interference patterns are commonly formed, as in the models. However, in some areas, the fold interference pattern might be modified by a later phase of thrusting. Similar to models results, superimposition of two and/or even more deformation phases may not be recorded by structures all over the tectonic area.     

A pan-sharpening method based on NSCT and formulated as compressive sensing problem

In this paper, a pan-sharpening method, using non-subsampled contourlet transform (NSCT) and the theory of compressive sensing (CS), is proposed. The NSCT is used for sparse image representation to perform a multiscale and directional decomposition of source images in order to express their detail and express the sparsity of their high frequency. The CS is used to merge the multispectral (MS) and panchromatic (pan) images from partial random measurements. Two different fusion rules are then applied. The final pan-sharpened image is obtained by inverse NSCT. Experimental results show the efficiency of the proposed method, compared with pan sharpening based on standard NSCT, in terms of visual quality and objective assessment. Moreover, the proposed technique is very effective when the storage and transmission bandwidth are limited.     

环境样品中16种多环芳烃分析方法研究

采用超声提取,固相小柱净化,高效液相色谱-荧光-紫外二极管阵列检测器串联的方法测定水、土壤、植物中16种多环芳烃含量。用正交法优化了固相萃取条件,并通过选择最佳荧光激发和发射光谱波长提高了荧光检测的灵敏度。仪器检出限0.02～8.15ug/L,方法精密度1.38%～7.59%,线性范围0.2～300ug/L,相关系数>0.999 1,样品加标回收率75.1%～96.3%。     

长江河口近底层悬沙和沉积物的交换过程研究

大河河口的动力沉积过程一直是陆海相互作用研究的核心内容,其中水体泥沙的垂向交换是河口动力-沉积机制分析中的关键环节。基于2011年12月对长江河口及其邻近海湾采集的大范围、高密度的近底层悬沙、海床表层1~2cm(表层沉积物)和垂向向下约2~10cm的沉积物(次表层沉积物)同步3组303个样品,利用经验正交函数方法,对河口地区的悬沙和沉积物交换过程进行研究。结果表明:近底层水体悬沙的空间分布模式主要以粉砂粒级为主,空间分布差异性不大;表层及次表层沉积物的空间分布模式相似,但较近底层水体悬沙的分布复杂,存在明显的区域性特征,其中南汇边滩水域中部辐散区的沉积物表现为粗粉砂-细砂模式,其他区域由粉砂组分模式组成。近底层水体悬沙、表层和次表层沉积物的第一模态主要反映了粒径较细的泥沙运动,第二模态主要反映了粒径较粗的泥沙运动。在近底层水体悬沙与表层沉积物的垂向交换中,主要交换粒级为粉砂组分粒级。在表层沉积物与次表层沉积物的垂向交换中,南汇边滩中部辐散区的主要交换粒级为粗粉砂-细砂组分粒级,其他区域主要为粉砂组分粒级。     

1961-2010年广东省高温天气时空变化特征分析

利用广东省27个地面观测站1961-2010年的日平均气温、日最高气温以及日最低气温等观测资料,采用线性倾向、Morlet小波分析、Mann-Kendall突变检验、EOF及REOF等统计方法,分析了广东省高温天气的气候变化特征。结果表明：广东省多年平均高温日数由北向南递减,并且递减趋势明显;近50 a广东省各地区的高温日数基本为上升趋势,中部高温日数的上升幅度最为明显;从全省平均情况来看,高温日数长期演变为显著的上升趋势,在20世纪90年代末之前处于偏少期,90年代末期以后进入偏多期,2005年后高温日数上升趋势较为显著;高温日数在1998年出现了突变现象;高温日数存在20-23 a的振荡周期,但这种周期性变化并不显著;广东省高温日数的标准化距平场可分为中部、北部和南部3区。     

采用加速溶剂萃取法提高微藻油脂萃取量的优化条件研究

设计4因子5水平的正交实验方案[采用正交表L25（5＾6）],通过确定加速溶剂萃取法（ASE）处理的最优化条件,包括萃取溶剂、萃取温度、萃取时间和萃取循环次数,达到快速萃取微藻油脂并且萃取量高的效果．结果表明,除循环次数外,其他萃取条件因子均能显著影响油脂萃取量（P〈0．035）．在萃取溶剂为无水乙醇或丙酮、温度为175℃、萃取时间为16min、循环次数为3次的最优处理条件下,微藻油脂萃取量最高（19．20％～21．36％）．与常规的索氏萃取法相比,萃取量可提高39．08％～47．09％．采用ASE法在最优化条件下萃取微藻油脂可以达到良好效果．     

Contemporary climatic change over the qinghai-xizang plateau and its response to the green-house effect

The knowledge of contemporary climatic change over the Qinghai-Xizang (Tibet) Plateau (QXP) has been inadequate for a long time due to lack of enough observational data. In this paper, on the basis of monthly temperature and precipitation data in 1961–1990 from 48 stations on the QXP, the temperature data are extended backward to 1901 with an empirical orthogonal function (EOF) method, microscopic characteristics of contemporary climatic change over the QXP are analyzed, and the response of the plateau climate to global warming is discussed in combination with atmospheric general circulation model (GCM) outputs. The results show that the plateau climate, as a whole, has been warming since the early part of this century, that the precipitation has generally been increasing during the recent 30 years, and that these climatic trends seem to be related to the enhanced green-house effect induced by increasing CO₂ concentration in the atmosphere. This work is supported by the National and CAS (the Chinese Academy of Sciences) Tibet Research Project.     

华北冬小麦-夏玉米两熟区干旱特征分析

研究华北冬小麦一夏玉米主要生长季的干旱时空特征,可为全球气候变暖背景下制定抗旱减灾对策提供理论依据。利用华北5省（市）64个气象台站1961-2010年逐日降水资料,以降水负距平或降水量表征的干旱指标,通过经验正交分解法提取了冬小麦、夏玉米全生育期和关键生长阶段的特征向量和时间系数,分析了干旱频率、站次比及干旱强度的变化特征,并通过构建冬小麦-夏玉米轮作期综合干旱指数,探讨了华北地区农业干旱的总体状况。结果表明：EOF分解的前4个模态提取了60％以上作物干旱的主要时空分布信息,冬小麦主要生长季收敛效果优于夏玉米;冬小麦全生育期、苗期及拔节-抽穗期干旱的高强度中心主要分布在冀中南、豫北及鲁西北地区,而灌浆-成熟期干旱则以豫东为中心;夏玉米全生育期干旱的高强度中心主要位于冀南和鲁北地区,初夏旱以冀北大部为高强度区,而卡脖旱以豫西和鲁南为高强度区。从时间系数和区域干旱强度及站次比的时间变化趋势看,冬小麦全生育期干旱、灌浆-成熟期干旱及夏玉米初夏旱、卡脖旱均表现为递减趋势,但未通过显著性检验,而冬小麦播种期、拔节-抽穗期干旱,以及夏玉米全生育期干旱为不显著的递增趋势。整个冬小麦-夏玉米轮作期干旱威胁较高的地区主要位于京津局部、冀中南、豫北和鲁北等地区。     

一种基于四元数的空间后方交会全局收敛算法

结合四元数在摄影测量中的良好应用,提出一种基于四元数的空间后方交会全局收敛算法。该算法利用四元数描述影像姿态,采用绝对定向和正交投影两种变换来代替中心投影的共线条件方程,再利用非线性方程直接迭代的方法进行求解,从而无需进行线性化,最后从理论上对算法的全局收敛性进行了证明。试验结果表明该算法正确可靠,对外方位元素初值没有要求,真正做到无初值依赖空间后方交会,具有很好的稳定性和适应性。