九寨沟M_S7.0地震对巴颜喀拉块体东北缘活动断裂影响的有限元模拟

在详细调研地震地质资料的基础上,构建了巴颜喀拉地块东北缘三维有限元模型。以九寨沟M_S7.0地震同震位错为荷载,模拟计算了九寨沟地震的发生对巴颜喀拉块体东北缘主要活动断裂加卸载效应的影响。模拟结果显示,九寨沟地震的发生对龙日坝断裂、虎牙断裂、青川-平武断裂西段、迭部-白龙江断裂西段和东段、临潭-宕昌断裂东段,以及处于甘青川交界危险区内的东昆仑断裂东段、塔藏断裂西段,处于六盘山南-西秦岭东危险区的西秦岭北缘断裂东段表现为库仑应力加载;对岷江断裂、塔藏断裂东段库仑应力卸载效应显著。     

CHARACTERISTICS OF FOCAL MECHANISMS AND STRESS FIELD IN THE EASTERN BOUNDARY OF SICHUAN-YUNNAN BLOCK AND ITS ADJACENT AREA

This study is devoted to a systematic analysis of the stress state of the eastern boundary area of Sichuan-Yunnan block based on focal mechanisms of 319 earthquakes with magnitudes between M3.0 and M6.9, occurring from January 2009 to May 2018. We firstly determined the mechanism solutions of 234 earthquakes by the CAP method, using the broadband waveforms recorded by Chinese regional permanent networks, and collected 85 centroid moment tensor solutions from the GCMT. Then we investigated the regional stress regime through a damp linear inversion. Our results show that:1)the focal mechanisms of moderate earthquakes are regionally specific with three principal types of focal mechanisms:the strike-slip faulting type, the thrust faulting type and the normal faulting type. The strike-slip faulting type is significant in the eastern boundary area of Sichuan-Yunnan block along the Xianshuihe-Xiaojiang Fault, the Daliangshan Fault, and the Zhaotong-Lianfeng Fault. The thrust faulting type and the combined thrust/strike-slip faulting type are significant along the Mabian-Yanjin Fault, Ebian-Yanfeng Fault and the eastern section of Lianfeng Fault; 2)The most robust feature of the regional stress regime is that, the azimuth of principal compressive stress axis rotates clockwise from NWW to NW along the eastern boundary of Sichuan-Yunnan Block, and the clockwise rotation angle is about 50 degrees. Meanwhile, the angels between the principal compressive axis and the trend of eastern boundary of Sichuan-Yunnan Block remain unchanged, which implies a stable coefficient of fault friction in the eastern boundary fault zone of Sichuan-Yunnan Block. The movement of the upper crust in the southeastern Tibetan plateau is a relatively rigid clockwise rotation. On the whole, the Xianshuihe-Xiaojiang Fault is a small arc on the earth, and its Euler pole axis is at(21°N, 88°E). The Daliangshan Fault is surrounded by the Anninghe-Zemuhe Fault, which formed a closed diamond shape. When the Sichuan-Yunnan block rotates clockwise, the Daliangshan Fault locates in the outer of the arc, while the Anninghe-Zemuhe Fault is in the inward of the arc, and from the mechanical point of view, left-lateral sliding movement is more likely to occur on the Daliangshan Fault. Our results can be the evidence for the study on the "cut-off" function of the Daliangshan Fault based on the stress field background; 3)The regional stress regime of the eastern boundary faults zone of the Sichuan-Yunnan Block is the same as the south section of the Dalianshan Fault, and the focal mechanism results also reveal that the Dalianshan Fault is keeping left-lateral strike-slip. There may be the same tectonic stress field that controls the earthquake activities in the southern section of Daliangshan Fault and Zhaotong-Lianfeng Fault. The regional stress regime of Zhaodong-Lianfeng Fault is also the same with the Sichuan-Yunnan Block, which implies that the control effect of the SE movement of the Sichuan-Yunnan block may extend to Weining.     

青藏高原东北缘SKS波分裂研究

利用青藏高原东北缘区域数字地震台网43个台站的远震SKS波形资料,采用最小能量法和旋转相关法得到台站下方上地幔介质各向异性的分裂参数:快波偏振方向(φ)和快慢波时间延迟(δt)。研究结果表明:在塔里木盆地东南缘区域,各向异性快波方向与该区域的断裂走向存在明显的夹角,该盆地向柴达木盆地的俯冲方向一致,各向异性归因为古构造运动遗留下的"化石各向异性",且由于壳幔物质的拆沉作用,推测该区域壳幔之间存在解耦作用;在祁连—河西走廊区,SKS快波偏振方向呈NW-SE,与主要断裂带的走向一致;在西秦岭北缘断裂带附近,观测到快慢波时间延迟有着较大的变化,可能是岩石圈变形和软流圈物质流动共同导致;在鄂尔多斯板块内,快波方向呈NW-SE方向,可能暗示青藏高原深部物质分叉绕流运动。青藏高原东北缘不同区域台站下方的各向异性均具有差异性,进一步证实了青藏高原东北缘地区构造变形的复杂性。     

鄂尔多斯块体西侧地壳各向异性初步研究

利用宁夏区域台网记录的2009年1月至2014年9月的近场小震波形资料, 使用剪切波分裂系统分析方法SAM方法, 对位于青藏高原东北缘的鄂尔多斯块体西侧进行了地壳各向异性研究, 共得到7个台站记录到的19条有效数据。 研究发现, 受复杂的局部构造、 应力场及断裂分布的影响, 研究区地壳各向异性在空间分布上呈现出分区性特点。 受区域构造应力场的控制, 台站的快剪切波偏振方向与区域构造应力的主压应力方向基本一致。 在构造上, 大致以中部的三关口—牛首山NNW向断裂为界, 可以分为南北两部分。 本研究显示, 以快剪切波偏振方向空间分布特征为划分依据, 大致以37°N为界划分南北部, 北部区域的快剪切波偏振方向为近N-S向, 与按构造划分的青藏高原东北缘—鄂尔多斯块体西侧北部区域主压应力场一致; 南部区域的快剪切波偏振方向为近E-W向, 同样与按构造划分的区域主压应力场一致。     

Development of push moraines in deeply frozen sediment adjacent to a cold-based glacier in the McMurdo Dry Valleys,Antarctica

Previous studies of push moraines have concluded that structural architecture is controlled by a combination of stress exerted by flowing ice and the rheology of the deforming sediment. However, the relationship between deformation processes and the thermal/hydrologic conditions within the sediment remains ambiguous. Using a combination of surface mapping, logging exposures and ground penetrating radar we examine the relationships between surface morphology, material properties and development of deformation structures in deeply frozen sediment that has been deformed by Joyce Glacier, a cold-based glacier in the McMurdo Dry Valleys. The structural architecture of the push moraines is characterized by a combination of brittle and ductile deformation structures that have produced a structurally complex pattern of thrust faults, low angle listric thrusts and recumbent folds that extend 400 m beyond the glacier margin. Deformation is ductile where the ice concentration exceeds c. 65% volume and predominantly brittle where the ice concentration is less than c. 65%. The change in rheology reflects transition in behaviour from the material having a predominantly frictional character when the ice is limited to pore spaces to a non-frictional character in which strength is primarily determined by the cohesive strength of the ice. This work shows that glaciotectonic deformation can occur in deeply frozen permafrost where there is no liquid pore water. We conclude that the presence of liquid porewater is not a necessary condition for the development of glaciotectonic deformation or for the formation of push moraines. © 2019 John Wiley & Sons, Ltd.     

新型节能复合混凝土空心砌块砌体抗震性能的试验研究

本文通过2片开窗洞加窗台梁节能复合混凝土小型空心砌块墙体和2片不开窗洞墙体的水平低周反复荷载试验,研究了节能复合混凝土小型空心砌块砌体墙的受力全过程、开裂部位、裂缝发展情况以及破坏形态,分析了墙体的滞回特性、延性、耗能能力,刚度退化曲线等抗震性能,同时,考察了墙体外叶保护层的受力性能、破坏程度以及与墙体的共同工作机理,探讨了不同构造措施以及开窗洞对墙体抗震性能的影响。研究结果表明:复合混凝土小型砌块砌体从开始加载到最终破坏,砌块保护层都没有明显的鼓凸和脱落现象,说明聚苯层及横向拉结筋能够提供可靠的连接,保证外叶保护层在水平剪力和竖向荷载共同作用下和墙体整体工作,此外,开窗洞对墙体的抗震性能削弱较大。     

青藏高原与东西两侧大陆的气温差异

主要对我国昆仑山-秦岭以南的东西部气温的差异问题进行简要讨论。比较气象台站实测气温和换算至海面后的温度,明显反映西部、中部和东部3个地貌阶块的海面气温自西向东逐级降低。我国西部高原地区全年温度较东部丘陵平原区相对偏高,主要原因在于青藏高原和南亚次大陆主要为西南季风所控制,致使气温相对偏高,而东部深受东南季风和来自高纬冬季风的影响,气温相对偏低。因而,全球变化和区域性季风气候是导致东西部气温差异的主导原因,而不能笼统地归之为高原增温效应和东部"冷槽"影响所致。      

青藏高原地热资源与地壳热结构

青藏高原具有独特的地壳结构和高热背景。南部的喜马拉雅地块属于"热壳冷幔"型,拉萨-冈底斯地体属于"热壳热幔"型地块,该区域内中地壳范围内存在一低速高导层,可能为部分熔融岩浆囊,形成了规模宏伟的地热带。高原水热活动带主要出露在喜马拉雅-冈底斯-念青唐古拉之间,>25℃的水热区有283处,>80℃的沸、热泉有近40处。著名的羊八井高温热储地热田,已经建成装机容量达25.18 MW的地热电站,为拉萨输送了大量电力,地热资源在高原能源结构中占有重要的地位,具有巨大的开发前景和价值。      

走滑断裂对超高压变质岩石折返的贡献及青藏高原北部白垩纪隆升之新思考

青藏高原已识别出柴北缘、南阿尔金和高喜马拉雅三条超高压变质带。这些超高压变质带提供了一个不可多得的研究超高压变质岩石形成和折返的机会。柴北缘超高压变质带位于阿尔金断裂的东边,是柴达木—东昆仑地体与祁连—阿尔金微地体和阿拉善—敦煌地体碰撞的产物,由榴辉岩、石榴石橄榄岩和含柯石英片麻岩组成,榴辉岩形成时代500~440Ma,峰期超高压变质年龄440Ma。南阿尔金超高压变质带位于阿尔金断裂带的西边,以产出榴辉岩和石榴石橄榄岩为特征,榴辉岩形成时代为500Ma。南阿尔金超高压变质带被认为是柴北缘超高压变质带的西延,两者被阿尔金断裂左旋位移约400km。阿尔金断裂是巨大的深度>200km的岩石圈走滑断裂,断裂的活动时代至少早到240~220Ma,认为走滑过程中伴随的隆升作用有可能为柴北缘和南阿尔金超高压变质岩石的折返和出露地表做出了贡献,其中阿尔金断裂起到了类似剪刀型断裂的作用。高喜马拉雅超高压变质带在巴基斯坦和印度被发现,以榴辉岩中含柯石英或金刚石为特征,榴辉岩的超高压变质年龄为46Ma,表明超高压变质岩石发生在雅鲁藏布江缝合线关闭后并快速折返。喀喇昆仑断裂走滑过程中伴随的抬升作用则可能对高喜马拉雅地区超高压变质岩石的折返和出露地表做出贡献。在中国东部出露的大别—苏鲁超高压变质带被巨大郯庐断裂左旋走滑位移约500km,可以看作是走滑作用伴随的抬升运动对超高压变质岩石的最后折返和出露地表做出重要贡献的又一例证。青藏高原的隆升通常被认为是印度板块和欧亚大陆新生代以来的碰撞结果。根据高原北部断裂的时代、火山活动和沉积盆地的形成,我们提出高原的隆升是两次俯冲碰撞的结果。第一次发生在中特提斯班公湖-怒江洋盆在白垩纪时期的关闭,其时由于北部来自塔里木盆地和北中国板块及东部来自太平洋板块俯冲产生的抵柱效应,高原北部开始隆升;第二次发生在印度板块的新生代俯冲碰撞作用,造成高原的整体抬升,由此可以解释高原北部平均海拔(5000m)要高于高原南部(平均海拔4000m)。     

移动式三维激光扫描技术在隧道扫描中的应用研究

移动式三维激光扫描技术通过发射激光并以螺旋线形式对隧道进行全断面高密度扫描,初步获取隧道表面特征信息,再通过内业分析发射和接收激光信号的强度,可以获得隧道衬砌内表面的影像信息.使用这些数据信息,可以对隧道状态、病害、限界、变形、收敛情况等进行分析和评价.本文采用移动式三维激光扫描技术选取杭州地铁5号线一个车站和区间进行...