冻土路基表面的融化指数与冻结指数

在冻土层之上筑路，由于会改变地-气界面的热物理特性，进而影响冻土层的热力→动力稳定性，故而修筑一定高度的路基成为保护冻土层所采取的一种常规措施．在修筑路基之后，与路基边坡的朝向有关的热效应是冻土路基工程保护措施必须考虑的问题．在数理分析与数值模拟分析的基础上，给出了可根据气温的年最大和最小月平均值计算路基表面的融化指数与冻结指数以及有关热状况参数的方法，并以青藏铁路北麓河段2002年为例进行了计算分析．实例分析表明，即便是没有修筑道路，北麓河地区的冻土也已经处于临界状态；路基相对的两个坡面，由于朝向不同会造成温度分布的强非均匀性，其中南和偏南方向与北和偏北方向的路基坡面热状况差异最大，有必要对路基相对的两个坡面采用不同的防护措施，一方面改善就地取土修筑路基对其下伏冻土层的直接不良影响，同时也尽可能减小路基表面温度分布的非均匀性，以避免纵向裂缝的发生。     

赣东北前震旦纪陆内叠加褶皱

江南古陆与华夏古陆拼接带北西侧前震旦纪地层中存在着近东西向褶皱叠加在早期近南北向褶皱上的现象,这是怀玉地块向西拼贴、华夏古陆向北西碰撞拼接过程中构造应力向陆内传递时形成的构造变形系统。叠加褶皱与拼接带具有成生联系,且各自代表了不同构造部位的变形特点。这一构造系统形成于前震旦纪,可能与格林威尔(Grenville)造山运动相当。     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

Recurrence characteristics of late-quaternary strong earthquakes on the major active faults along the northern border of Ordos block

Through study on trenches, analysis of recurrence characteristics and recurrence interval cluster/gap of strong earthquakes along the major active faults on the northern border of Ordos block, we found 62 paleoearthquakes that occurred in the late Quaternary, including 33 earthquakes occurring in the Holocene. The recurrence characteristics of the paleoearthquakes are different at three levels, segments, faults, and fault zones. The strong seismic sequence on the independent segments is mostly characterized by long- and short-interval recurrences, while that on the faults and in fault zone is characterized clearly by random and cluster recurrences. Results of the moving window test indicate that the probabilities of "temporal cluster or gap", caused by random coincidence as opposed to intersegment contagion, are 64% and 70% for the Serteng piedmont fault and for the south-border fault of Wula Mountains, respectively, no clear interaction among the segments of each fault; while the probability is 26.8% for the whole fault zone, suggesting a clear interaction among the faults of this fault zone. These recurrence characteristics may imply an effect of the entire block motion on the recurrence of strong earthquakes. Moreover, the elapsed time for the Wujumeng Pass-Dongfeng Village segment of Serteng piedmont fault and the Tuzuo Banner-Wusutu and the Hohhot segments of Daqingshan piedmont fault has exceeded the average recurrence interval, hence these three segments may be the possible places for future strong earthquakes.     

Late Cenozoic deformation subsequence in northeastern margin of Tibet --Detrital AFT records from Linxia Basin

Two events of Tibet uplifting are revealed by detrital apatite fission track (AFT) age data from Linxia Basin. They occurred at about 14 and 5.4-8.0 MaBP respectively. We interpret the first one to be related to the uplifting of the northern Tibet, which might have resulted from convectively removing the thickened lower lithosphere. The second one is a result of Laji Mountain uplifting. Numerous studies of the Tibetan Plateau suggest that the onset time of the deformation in the northeastern margin of Tibetan Plateau and the time of Tibet attaining to its present elevation is about 8 MaBP. They are approximately coincident with the uplift of Lajishan Mountain. It suggests that the northeastern margin of Tibet propagated northeastwardly to its present site in about 8 MaBP for accommodating the sustained convergence between India-Eurasia plate and for keeping its high elevation. The active block pattern dominating the strong earthquake distribution of Chinese continent probably formed at about 8.0-5.4 MaBP.     

基于信息块法的矢量符号库的建立和符号化实现

基于试验成果，详细介绍了基于信息块法的矢量地图符号库的建立和空间信息的符号化。     

一种基于多项式的图像压缩方法

介绍了数字图像压缩的一种新的思维方法，即在将给定的图像块根据纹理特征分为平滑块、斜面块、曲面块、边缘块后，在基于不同多项式对不同类图像块分别进行处理的过程中，对于包含大量高频信息的边缘块，通过提取边缘轮廓位置信息，减少图像块内的高频信息量，而后再对被边缘轮廓分割的新图像块进行分类、处理：由于把图像边缘轮廓的大部分高频信息分解于边沿信息中，因此提高压缩比时不会丢失太多高频细节，减少了物体的边界噪声和可见的图块边界，从而在相同压缩比的前提下，更加保证了图像的视觉效果。文章中给出了此种方法的理论公式、推导过程以及整个实现过程，并通过实例比较了此方法与二维离散余弦变换在图像压缩中的性能差异。     

昆仑山口西8.1级地震前青藏块体边界断层异常活动

系统分析了青藏块体边界断层的形变资料，研究了断层活动的动态过程及空间分布。结果表明，昆仑山口西8．1级地震前孕震影响范围达到青藏块体的周边地区；发震断层所在的构造带震前断层活动最为剧烈；加强对构造块体断层整体活动的宏观动态比较和分析，有助于判定未来强震发生的危险地段；震后应力将转移并集中到西秦岭构造带及其邻近地区。     

1966年以来华北地区一系列七级大震破裂过程的数值模拟

用非连续变形分析方法(DDA+FEM)数值模拟，在华北地区各地块相互制约的块体系统环境中，地块边界断层上发生1966年邢台地震、 1969年渤海地震、 1975年海城地震、 1976年唐山地震等不同类型破裂模式大震的破裂过程. 数值模拟结果给出每个大震释放的主应力场，最大剪应力变化等值线图，地震前后位移变化矢量图，发震断层滑移随时间变化以及走滑错距和应力降等震源参数. 这些结果与地震的震源机制，用地震波资料研究得到的震源参数,宏观等震线,地表观测的水平位移矢量图基本一致. 其中1969年渤海地震正交破裂模式的结果与宏观等震线及小震分布图像更接近. 1976年唐山地震复杂震源模式与该震早期余震分布图像更相符. 表明用DDA+FEM方法进行数值模拟研究，能较好地模拟地震破裂过程.