Estimating winter wheat biomass by assimilating leaf area index derived from fusion of Landsat-8 and MODIS data

A sufficient number of satellite acquisitions in a growing season are essential for deriving agronomic indicators, such as green leaf area index (GLAI), to be assimilated into crop models for crop productivity estimation. However, for most high resolution orbital optical satellites, it is often difficult to obtain images frequently due to their long revisit cycles and unfavorable weather conditions. Data fusion algorithms, such as the Spatial and Temporal Adaptive Reflectance Fusion Model (STARFM) and the Enhanced STARFM (ESTARFM), have been developed to generate synthetic data with high spatial and temporal resolution to address this issue. In this study, we evaluated the approach of assimilating GLAI into the Simple Algorithm for Yield Estimation model (SAFY) for winter wheat biomass estimation. GLAI was estimated using the two-band Enhanced Vegetation Index (EVI2) derived from data acquired by the Operational Land Imager (OLI) onboard the Landsat-8 and a fusion dataset generated by blending the Moderate-Resolution Imaging Spectroradiometer (MODIS) data and the OLI data using the STARFM and ESTARFM models. The fusion dataset had the temporal resolution of the MODIS data and the spatial resolution of the OLI data. Key parameters of the SAFY model were optimised through assimilation of the estimated GLAI into the crop model using the Shuffled Complex Evolution-University of Arizona (SCE-UA) algorithm. A good agreement was achieved between the estimated and field measured biomass by assimilating the GLAI derived from the OLI data (GLAI_L) alone (R² = 0.77 and RMSE = 231 g m⁻²). Assimilation of GLAI derived from the fusion dataset (GLAI_F) resulted in a R² of 0.71 and RMSE of 193 g m⁻² while assimilating the combination of GLAI_L and GLAI_F led to further improvements (R² = 0.76 and RMSE = 176 g m⁻²). Our results demonstrated the potential of using the fusion algorithms to improve crop growth monitoring and crop productivity estimation when the number of high resolution remote sensing data acquisitions is limited.     

多尺度细节增强的遥感影像超分辨率重建

鉴于现有超分辨率重建方法难以突显重建影像细节信息的问题,提出多尺度细节增强的遥感影像超分辨率重建模型框架。首先,通过最小二乘滤波方法将序列影像分解成包含大尺度边缘的平滑信息和包含中小型尺度的细节信息;其次,利用插值方法得到相应的高分辨率细节信息和平滑信息,构造纹理细节增强函数,提升中小型细节的增强幅度;最终,融合细节信息和平滑信息,得到初始的超分辨率重建结果,并利用局部优化模型进一步改善重建影像质量。选取同时相和多时相遥感影像作为试验数据。试验结果表明,本文重建结果与插值方法、TV方法和MAP方法相比,在客观评价指标上均有显著提高,明显改善了重建影像的纹理细节。论文提出的多尺度细节增强的超分辨率重建方法,可以使重建影像提供更多高频细节信息,具有较好鲁棒性和普适性。     

利用多光谱卫星遥感和深度学习方法进行青藏高原积雪判识

青藏高原积雪对全球气候变化十分重要,针对已有积雪遥感判识方法中普遍采用的可见光与红外光谱数据易受复杂地形与高海拔影响,导致青藏高原地区积雪判识精度较低的问题,提出了一种基于多光谱遥感与地理信息数据特征级融合的积雪遥感判识方法:以风云三号卫星可见光与红外多光谱遥感资料与多要素地理信息作为数据源,由地面实测雪深数据与现有积雪产品交叉筛选出样本标签,构建并训练基于层叠去噪自编码器(SDAE)的特征融合与分类网络,从而有效辨识青藏高原遥感图像中的云、积雪以及无雪地表。经地面实测雪深数据验证,该方法分类精度显著高于使用相同数据源的FY-3A/MULSS积雪产品,略高于国际主流积雪产品MOD10A1与MYD10A1,并且年均云覆盖率最低。试验结果表明该方法可有效地减少云层对积雪判识的干扰,提升分类精度。     

遥感数据融合的进展与前瞻

数据融合是提升遥感影像应用能力的重要手段,一直是遥感信息处理与应用领域的研究热点。本文系统综述了遥感数据融合的进展与前瞻:首先对数据融合的层次与分类进行了总结和归纳,将遥感数据融合划分为同质遥感数据融合、异质遥感数据融合、遥感—站点数据融合、遥感—非观测数据融合4大类;在此基础上,重点针对时—空—谱光学遥感数据的融合,从多视超分辨率融合、多尺度融合、空—谱融合、时—空融合、时—空—谱一体化融合等方面进行了详细阐述;最后总结了遥感数据融合的前瞻研究方向,包括时—空—谱一体化融合的拓展、空天地观测数据的跨尺度融合、传感网环境下的在线融合、面向应用的融合方法等。     

结合像元分解和STARFM模型的遥感数据融合

高空间、时间分辨率遥感数据在监测地表快速变化方面具有重要的作用。然而,对于特定传感器获取的遥感影像在空间分辨率和时间分辨率上存在不可调和的矛盾,遥感数据时空融合技术是解决这一矛盾的有效方法。本文利用像元分解降尺方法(Downscaling mixed pixel)和STARFM模型(Spatial and Temporal Adaptive Reflectance Fusion Model)相结合的CDSTARFM算法(Combination of Downscaling Mixed Pixel Algorithm and Spatial and Temporal Adaptive Reflectance Fusion Model)进行遥感数据融合。首先,利用像元分解降尺度方法对参与融合的MODIS数据进行分解降尺度处理;其次,利用分解降尺度的MODIS数据替代STARFM模型中直接重采样的MODIS数据进行数据融合;最后以Landsat 8和MODIS遥感影像数据对该方法进行了实验。结果表明:(1)CDSTARFM算法比STARFM和像元分解降尺度算法具有更高的融合精度;(2)CDSTARFM能够在较小的窗口下获得更高的融合精度,在相同的窗口下其融合精度也高于STARFM;(3)CDSTARFM融合的影像更接近真实影像,消除了像元分解降尺度影像中的"图斑"和STARFM模型融合影像中的"MODIS像元边界"。     

An efficient application of fusion approach for hot spot detection with MODIS and PALSAR-1 data

Hot spot detection with satellite images, especially with synthetic aperture radar (SAR) images is still a challenging task. Several researchers have used TM/optical data for identification of hot spot but the use of SAR data is very limited for this type of application. The fusion of SAR data with TM/optical data may add additional information which in turn will lead for enhancement of detection capability of the hot spot. Therefore, this study explores the possibility of fusion of Moderate Resolution Imaging Spectroradiometer (MODIS) and Phased Array L-band Synthetic Aperture Radar (PALSAR) satellite images for the hot spot detection. Image fusion is emerging as a powerful tool where information of various sensors can be used for obtaining better results. For this purpose, vegetation greenness and roughness information which is obtained from MODIS and PALSAR satellite images, respectively, are used for fusion, and then, a contextual-based thresholding algorithm is applied to the fused image for hot spot detection. The proposed approach comprises of two steps: (1) application of genetic algorithm-based scheme for image fusion of MODIS and PALSAR satellite images, and (2) classification of the fused image as either hot spot or non-hot spot pixels by employing a contextual thresholding technique. The algorithm is tested over the Jharia Coal Field region of India, where hot spot is one of the major problems and it is observed that the proposed thresholding technique classifies the each pixel of the fused image into two categories: hot spot and non-hot spot and the proposed approach detects the hot spot with better accuracy and less false alarm.     

多波束声呐和侧扫声呐数据融合方法研究综述

多波束声呐系统与侧扫声呐系统均为海底面探测的重要工具,二者均采用声学方法,在工作原理上存在异同。本文简要介绍了二者的研究进展,分别对其数据处理进行了比对分析,认为多波束声呐处理方法侧重于数据的测量精度,而侧扫声呐则主要侧重于图像处理;归纳了当前二者主要的数据匹配融合方法,包括同名特征融合、基于SURF算法的匹配融合以及特征点融合,从数据采集原理上对数据融合方法进行了深入分析,发现在探头定位、单ping数据点分布以及ping之间的数据定位上存在一定的困难,即使经过一定的处理,二者采集的也非简单的平面图像,故二者的数据融合尚存在一定的难度。     

熔融制样-X射线荧光光谱法测定电气石中12种主次量元素

电气石是一类含硼的铝硅酸盐矿物,化学成分复杂、化学稳定性强,不易湿法分解,B_2O_3含量较高,导致其主次量元素的同时测定存在一定困难。本文采用熔融法制样,建立了X射线荧光光谱法测定电气石Na_2O、MgO、Al_2O_3、SiO_2、P_2O_5、K_2O、CaO、TiO_2、V_2O_5、Cr_2O_3、MnO、TFe_2O_3等主次量元素的分析方法。样品与四硼酸锂-偏硼酸锂-氟化锂(质量比为4.5∶1∶0.4)混合熔剂的稀释比例为1∶10,消除了粒度效应和矿物效应;在缺少电气石标准物质的情况下,选择土壤、水系沉积物及多种类型的地质标准物质绘制校准曲线,利用含量与电气石类似的标准物质验证准确度,测定结果的相对标准偏差小于4.2%。采用所建方法测定四种不同类型电气石实际样品,测定值与经典化学法基本吻合。本方法解决了电气石不易湿法分解和硼的干扰问题,测定结果准确可靠,与其他方法相比操作简便,分析周期短。     

Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.