梭鱼标准代谢、内源氮排泄与体重和温度的关系

在 13.5 ,18,2 1.5 ,2 4和 2 7℃ 5个温度条件下测定了梭鱼 (体重范围 1.88～ 14.0 2 g)的标准代谢率和内源氮排泄率。梭鱼标准代谢率随体重的增加而增加 ,二者的关系为幂函数关系 ;随温度的升高而增加 ,二者的关系为指数关系 ;标准代谢率与体重和温度的关系可用如下方程表示 :RS=0 .12 4 6 W0 .9954 e0 .0 84 1T(r2 =0 .92 2 0 )。梭鱼的氨氮、尿素、总氮及能量的排泄率随体重和温度的增加而增加 ,与体重为幂函数关系 ,与温度的关系为多项式形式。梭鱼氨氮和尿素日排泄率的变幅分别为 0 .15～ 0 .88mg N/d和 0 .0 3～ 0 .2 9mg N/d。不同温度下 ,尿素排泄量占总氮比例在 9.9%～2 2 .4 9%之间 ,随温度升高该值有逐渐增大的趋势。     

大黄鱼病原弧菌拮抗放线菌的筛选与人工诱变

从厦门集美海滩底泥分离得到38株放线菌，用琼脂块法测定它们对大黄鱼病原弧菌-溶藻弧菌和副溶血弧菌的拮抗效果，选择两株拮抗效果较好的放线菌进行诱变，测定诱变后各菌株的抗菌效果，并选择抗菌效果较好的菌株进行第二次诱变，如此反复诱变3次，共得到97株放线菌，结果表明；38株放线菌中的22株对两株病原菌有一定的拮抗作用；用紫外线照射可以获得少量对两株病原菌拮抗作用加强的菌株。     

使用简易测试平台检测马哈克扭力仪的性能

本文描述简易测试平台的原理与制作，对马哈克MAIHAK MDS－820型扭力仪检测模拟负载的准确性进行探讨。     

海水分光反射率与叶绿素浓度的相关分析

通过对东京湾两年度不同季节海水分光反射率与叶绿素浓度进行统计分析，结果表明，叶绿素浓度Ｃ与两谱段分光反射率之比Ｒｗ（λｊ）／Ｒｗ（λｊ）具有幂函关系Ｃ＝Ａ［Ｒｗ（λｊ）／Ｒｗ（λｊ）Ｂ。两者的对数显示出较好的线性关系，即ｌｏｇＣ＝ｌｏｇＡ＋Ｂｌｏｇ［Ｒｗ（λｊ）／Ｒｗ（λｊ）］。负相关系数达０．９９。相关方程之一为Ｃ＝３．３２９［Ｒｗ（５２０）／Ｒｗ（５５０）］－１．３８４（１９８７年６月初）．在梅雨季节之后，相关方程为Ｃ＝１２．６８［Ｒｗ（５２０）／Ｒｗ（５５０）］－２．０１０（１９８８年８月）。这表明了海湾或混浊的沿岸水质，在叶绿素浓度算法中，统计参数Ａ和Ｂ的确立，要基于不同季节不同水质的现场观测资料。     

海洋生物-光学算法研究──南黄海叶绿素浓度的估算

根据1995年9月中日合作南黄海现场观测资料，对南黄海生物一光学算法进行研究。首先对南黄海现场多光谱反射比数据进行因子分析，解反射比协方差矩阵的特征问题；解出特征值和对应的特征向量，求出主因子，然后建立叶绿素a浓度对主因子的多元线性回归方程，并对算法进行回报和预报检验。计算结果表明，该算法具有较高精度，同时也显示出天气条件对估算精度产生较大影响。     

Distribution of As, Cr and V species in the Po-Adriatic mixing area, (Italy)

The distribution of dissolved and participate concentrations of As, Cr and V was investigated in the mixing area of the Po river in five surveys over the period March 1992-March 1995. The data obtained indicate noticeable contamination of coastal waters of the northern Adriatic with Cr but not As or V. Total dissolved concentrations for As and V were comparable with oceanic levels but were higher by a factor of 4 for Cr. These results suggest either low anthropogenic inputs of As and V, from terrigenous and atmospheric sources, or efficient removal mechanisms. The investigated metals had low reactivity during freshwater-seawater mixing and the distribution of concentrations in the dissolved and solid phases suggests that the dilution process is the main factor controlling the transport of these metals to the sea in low-to-medium solid transport conditions. Further investigations are required to elucidate the behavior of these metals during high solid transport conditions. Significant changes in the speciation of As occurred during the transition between the two end-member matrices. In the coastal waters of the northern Adriatic, the arsenite fraction in winter, and the arsenite and dimethylarsinate fractions in summer increased with respect to riverine waters. Changes in the speciation of chromium were minor, but also showed a small increase in reduced species in marine waters.     

Siltation Prediction for Navigation Channels and Harbour Basins on Muddy Beach

- This paper, after briefly reviewing the experimental research on sediment transport on muddy beach since the 1950s, improves and perfects the method for forecasting siltation in navigation channels and harbour basins which was first put forward in China by the authors. In consideration of silty sediment and sand, some factors in forecasting methods have been changed and modified. Consequently, the modified methods can be used either to compute siltation in navigation channels and harbour basins on muddy beach or to compute siltation and scouring in navigation channels and harbour basins on both silty beach and sandy beach. The verification of field data from eleven large, medium and small natural harbours shows a good agreement between the forecasting by the modified method and the natural conditions. Finally, the paper deals with the rational utilization of water area after the construction of the West Dyke in Lianyungang, the maintenance of water depth of the navigation channel at the entrance, siltation distribution, siltation in the navigation channel and harbour basin for ships of 100 thousand tonnnage. Results once again prove that the prospect of constructing Lianyungang Harbour into a deepwater harbour is bright.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

鳗弧菌(Vibrio anguillarum)M3菌株生长条件及其对蛋白酶产量的影响

采用体外测定细菌浓度、胞外产物(ECP)蛋白含量和蛋白酶活力的方法，进行了鳗弧菌M3菌株在2216E培养基中的培养条件研究。结果表明，该菌株用固体培养基培养至24h左右，可得到较高的菌体浓度、ECP蛋白含量和蛋白酶活力。采用响应面分析方法设计实验，用SAS统计软件分析数据，得到NaCl浓度、pH值和温度对菌体生长及蛋白酶产量影响的回归模型。在2216E培养基的基础上，添加不同氮源、碳源物质以及不同浓度蛋白胨进行生长研究。结果表明，胰大豆蛋白胨能促进菌体生长及ECP蛋白分泌；NH4Cl与酪蛋白水解物可抑制蛋白酶的产生；牙鲆肌肉匀浆对菌体、ECP蛋白产量和蛋白酶产生有不同程度的促进作用；培养基中蛋白胨浓度为4％时菌体量与ECP蛋白含量达最高值，在蛋白胨浓度为2％时蛋白酶分泌量已稳定；1％的葡萄糖、蔗糖、甘油均能显著地提高菌体及ECP蛋白产量，却抑制了蛋白酶的产生。     

Practical implementation of Hilbert-Huang Transform algorithm

Hilbert-Huang Transform (HHT) is a newly developed powerful method for nonlinear and non-stationary time series analysis. The empirical mode decomposition is the key part of HHT, while its algorithm was protected by NASA as a US patent, which limits the wide application among the scientific community. Two approaches, mirror periodic and extrema extending methods, have been developed for handling the end effects of empirical mode decomposition. The implementation of the HHT is realized in detail to widen the application. The detailed comparison of the results from two methods with that from Huang et al. (1998, 1999), and the comparison between two methods are presented. Generally, both methods reproduce faithful results as those of Huang et al. For mirror periodic method (MPM), the data are extended once forever. Ideally, it is a way for handling the end effects of the HHT, especially for the signal that has symmetric waveform. The extrema extending method (EEM) behaves as good as MPM, and it is better t