渤海区域地质信息管理系统数据库设计方案

数据库是GIS的基础。以渤海区域地质信息管理系统数据库为例，阐述了基于GIS的海洋地学管理信息系统中数据库的组织方法，及所包括空间数据库与属性数据库数据分类、分层方案，命名及编码规则，以及二者之间的联接。     

Damage Detection Methods for Offshore Platforms Based on Wavelet Packet Transform

1 .IntroductionInthe whole service period of the platforms ,some damage is unavoidable due to the corrosion,impact ,fatigue and so on.The damage whould cause the structures’ultimate capacity and safety de-crease .Presently,it is generally acceptedthat the detection of damage involes considerable statisticaluncertainties,thus lot of efforts is made for the damage probalility model ,for example Song and Lu(1996) usedthefuzzy-settheoryto estimatethe humanerrorsthroughthe definitionof inspection…     

一个基于TOPEX卫星极端海面风速预测的海洋地理信息系统

在基于 TOPEX卫星数据建立全球极端海面风速预测模型的基础上 ,开发出用于极端海面风速预测和可视化预测结果的海洋地理信息系统 (MGIS)。并论述全球极端海面风速预测的意义和 MGIS在预测过程中的重要性及必要性 ;给出全球极端海面风速预测的统计模型 ;简述极端海面风速预测海洋地理信息系统的结构、工作流程和功能 ;同时 ,对系统的预测结果进行初步分析     

胜利二号极浅海步行坐底式钻井平台防腐措施研究

本文根据胜利二号极浅海步行坐底钻井平台的作业和工作环境特点，进行了防腐措施研究，设计了切合实际的防腐措施。该平台在海上作业近四年进坞修理，经观测防腐情况良好。     

基于BP人工神经网络的水体遥感测深方法研究

利用Landsat7ETM＋遥感图像反射率和实测水深值之间的相关性,建立了动量BP人工神经网络水深反演模型,并对长江口南港河段水深进行了反演.结果表明：具有较强非线性映射能力的动量BP神经网络模型能较好地反演出长江口南港河段的水深分布情况;由于受长江口水体高含沙量的影响,模型对小于5 m的水深值反演精度较高,而对大于10 m的水深值反演精度较低.     

海洋作业渔船管理系统的设计与运行试验

对渔政管理指挥系统建设项日中的业务软件部分渔船管理系统的设计方案进行了介绍。根据我国渔洋作业渔船的实际管理模式，提出了渔船管理系统设计方案。系统通过网络化的业务处理和管理流程，规范渔船建造、审批、登记以及捕捞许可证发放等管理业务，实现渔船控制指标的统一分配，以控制捕捞业发展规模和保护我国的渔业资源。系统以Microsoft VB6．0，Delphi6．0开发，在Window98／2000／XP环境下运行。通过运行试验，对系统运行环境进行了评估，为渔政管理信息化的建设、系统升级提供了经验和技术依据。     

Validity of sea surface temperature observed with the TRITON buoy under diurnal heating conditions

In order to investigate the validity of buoy-observed sea surface temperature (SST), we installed special instruments to measure near-surface ocean temperature on the TRITON buoy moored at 2.07°N, 138.06°E from 2 to 13 March 2004, in addition to a standard buoy sensor for the regular SST measurement at 1.5-m depth. Large diurnal SST variations were observed during this period, and the variations of the temperatures at about 0.3-m depth could be approximately simulated by a one-dimensional numerical model. However, there was a notable discrepancy between the buoy-observed 1.5-m-depth SST (SST_1.5m) and the corresponding model-simulated temperature only during the daytime when the diurnal rise was large. The evaluation of the heat balance in the sea surface layer showed that the diurnal rise of the SST_1.5m in these cases could not be accounted for by solar heating alone. We examined the depth of the SST_1.5m sensor and the near-surface temperature observed from a ship near the buoy, and came to the conclusion that the solar heating of the buoy hull and/or a disturbance in the temperature field around the buoy hull would contribute to the excessive diurnal rise of the SST_1.5m observed with the TRITON buoy. However, the temperature around the hull was not sufficiently homogenized, as suggested in a previous paper. For the diurnal rise of the SST_1.5m exceeding 0.5 K, the daytime buoy data became doubtful, through dynamics that remain to be clarified. A simple formula is proposed to correct the unexpected diurnal amplitude of the buoy SST_1.5m.     

GIS方法在南沙群岛海区海底灾害地质研究中的应用

采用GIS方法，对南沙群岛海区海底灾害地质进行空间叠加分析。利用模糊数学方法，对不同灾害地质因素赋予不同的模糊影响权值；运用模糊叠加模型，得到南沙群岛海区海底灾害地质综合评价图。与前人的研究工作进行对比的结果表明，GIS方法是进行海底灾害地质评价的一种有效方法。     

Structural monitoring of offshore platforms using impulse and relaxation response

Monitoring offshore platforms, long span bridges, high rise buildings, TV towers and other similar structures is essential for ensuring their safety in service. Continuous monitoring assumes even greater significance in the case of offshore platforms, which are highly susceptible to damage due to the corrosive environment and the continuous action of waves. Also, since a major part of the structure is under water and covered by marine growth, even a trained diver cannot easily detect damage in the structure. In the present work, vibration criterion is adopted for structural monitoring of jacket platforms. Artificial excitation of these structures is not always practicable and ambient excitation due to wind and waves may not be sufficient for collecting the required vibration data. Alternate methods can be adopted for the same purpose, for example, the application of an impact or a sudden relaxation of an applied force for exciting the structure. For jacket platforms, impact can be applied by gently pushing the structure at the fender while relaxation can be accomplished by pulling the structure and then suddenly releasing it using a tug or a supply vessel in both cases. The present study is an experimental investigation on a laboratory model of a jacket platform, for exploring the feasibility of adapting vibration responses due to impulse and relaxation, for structural monitoring. Effects of damage in six members of the platform as well as changes in deck masses were studied. A finite element model of the structure was used to analyze all the cases for comparison of the results as well as system identification. A data acquisition and analysis procedure for obtaining the response signatures of the platform due to the impulse and relaxation procedure was also developed for possible adoption in on-line monitoring of offshore platforms. From the study, it has been concluded that both impulse and relaxation responses are useful tools for monitoring offshore jacket platforms. The present work forms the basis for the development of an automated, on-line monitoring system for offshore platforms, using neural networks.     

数字水准仪标尺编码原理研究

数字水准仪的标尺编码规则直接影响其测量精度.基于现有几种数字水准仪标尺编码的特点,归纳出标尺条码的编码衡量指标:信息密度、分辨率和纠错能力.以条码的最大编码容量与单个码区长度之比值衡量其承载的信息密度;利用光学系统的点扩散函数研究条码图像的分辨率,即相邻边缘的相互影响,得出码元相邻边缘的间距相等时,影响最小的结论;用相关系数或编码所用函数本身的性质表征条码的纠错能力.依据编码指标建立一套新的标尺编码规则:以格雷码为数值码,固定宽度的码元为参考码,两者交替组合.分析表明,该种编码不但信息密度大,分辨率高,而且纠错能力强.