Simultaneous operation of opposing reaction mechanisms: The influence of matrix heterogeneity on post-kinematic garnet crystallization in an inverted metamorphic sequence

Metapelites from the inverted Barrovian sequence in the Sikkim Himalaya (northeast India) are shown to be largely continuous with respect to their bulk rock compositions, microstructures and pressure–temperature–time–deformation (P–T–t–D) histories. However, the upper garnet–lower staurolite zone demarcates a region of microstructurally anomalous post-kinematic garnet populations contained within strongly segregated matrices. The different microstructures within samples from this region cannot be attributed to differences in their thermobarometric histories or bulk compositions, but are instead interpreted to represent an otherwise unexposed level of the Daling Group that is now exposed along a post-metamorphic thrust splay. These heterogeneous samples contain several discrete garnet populations that progressively crystallized with increasing P–T. Garnet populations that experienced the most protracted growth now form complex polycrystals that exhibit crystallographically controlled and morphologically irregular interfaces adjacent to micaceous and quartzofeldspathic domains respectively. Electron backscatter diffraction indicates that these polycrystalline garnet structures contain numerous coalesced porphyroblasts that are structurally uncorrelated across their grain boundaries. However, a crystallographically preferred orientation at the polycrystal scale is interpreted to derive from epitaxial crystallization of early-formed garnet porphyroblasts on precursor mica. Later-nucleated porphyroblasts within polycrystals preferentially concentrated towards quartzofeldspathic domains, with the overall nucleation distribution likely controlled by a complex interplay between chemical heterogeneities, strain partitioning and epitaxial crystallization. The subsequent growth of these polycrystals was equally spatially heterogeneous; it was moderated by differences in the efficiency of grain boundary transfer between quartzofeldspathic and micaceous domains that precluded thin section-scale chemical equilibration. In contrast to samples from Sikkim containing more typical porphyroblastic populations in continuous and disseminated matrices, heterogeneous availability of garnet-forming components within this strongly layered matrix is shown to have resulted in grain-scale variations in growth rates and the spatial juxtapositioning of interface-controlled microstructures and locally equilibrated chemical compositions with those that were transport controlled.     

Environmental controls of wood entrapment in upper Midwestern streams

Wood deposited in streams provides a wide variety of ecosystem functions, including enhancing habitat for key species in stream food webs, increasing geomorphic and hydraulic heterogeneity and retaining organic matter. Given the strong role that wood plays in streams, factors that influence wood inputs, retention and transport are critical to stream ecology. Wood entrapment, the process of wood coming to rest after being swept downstream at least 10 m, is poorly understood, yet important for predicting stream function and success of restoration efforts. Data on entrapment were collected for a wide range of natural wood pieces (n = 344), stream geomorphology and hydraulic conditions in nine streams along the north shore of Lake Superior in Minnesota. Locations of pieces were determined in summer 2007 and again following an overbank stormflow event in fall 2007. The ratio of piece length to effective stream width (length ratio) and the weight of the piece were important in a multiple logistic regression model that explained 25% of the variance in wood entrapment. Entrapment remains difficult to predict in natural streams, and often may simply occur wherever wood pieces are located when high water recedes. However, this study can inform stream modifications to discourage entrapment at road crossings or other infrastructure by applying the model formula to estimate the effective width required to pass particular wood pieces. Conversely, these results could also be used to determine conditions (e.g. pre‐existing large, stable pieces) that encourage entrapment where wood is valued for ecological functions. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of All-Weather and Real-Time Bottom-Mounted Monitor of Bed Load Quantity

Quantity of bed load is an important physical parameter in sediment transport research. Aiming at the difficulties in the bed load measurement, this paper develops a bottom-mounted monitor to measure the bed load transport rate by adopting the sedimentation pit method and resolving such key problems as weighing and desilting, which can achieve long-time, all-weather and real-time telemeasurement of the bed load transport rate of plain rivers, estuaries and coasts. Both laboratory and field tests show that this monitor is reasonable in design, stable in properties and convenient in measurement, and it can be used to monitor the bed load transport rate in practical projects.     

Land use changes,torrent control works and sediment mining: effects on channel morphology and sediment flux,case study of the Reno River (Northern Italy)

As with most Italian rivers, the Reno River has a long history of human modification, related also to morphological changes of the lower Po River since Roman times, but in the last decades, significant land use changes in the headwaters, dam construction, torrent control works and extensive bed material mining have caused important channel morphology and sediment budget changes. In this paper, two main types of channel adjustment, riverbed incision and channel narrowing, are analysed. Riverbed degradation is discussed by comparing four different longitudinal profiles surveyed in 1928, 1951, 1970 and 1998 in the 120 km long reach upstream of the outlet. The analysis of channel narrowing is carried out by comparing a number of cross‐sections surveyed in different years across the same downstream reach. Field sediment transport measurements of seven major floods that occurred between 2003 and 2006 are compared with the bedload transport rates predicted by the most renowned equations. The current low bedload yield is discussed in terms of sediment supply limited conditions due to land use changes, erosion‐control works and extensive and out of control bed material mining that have affected the Reno during the last decades. Copyright © 2011 John Wiley & Sons, Ltd.     

Advective flow in sediments under the influence of compaction

Abstract

Models on flow and transport in surface water sediments currently neglect compaction, although it is well understood that compaction is one of the major processes below the free fluid-sediment interface. Porosity changes in the sediment layers, as a result of compaction, are measured in almost all probes: porosity decreases with the distance from the surface water-sediment interface. This paper provides a rigorous derivation of basic flux terms for a frame of reference that is moving with the fluid-sediment interface. It is shown how burial rate, interface velocity, velocities of fluid and solid phase and porosity are connected—under steady-state conditions. It turns out that porosity and the velocities in a one-dimensional column can be directly computed from each other. These findings are important not only for the understanding of compaction-driven flow itself; they are crucial for all studies on storage and transport of chemical components in sediments. As mass fluxes across the sediment-water interface may be affected, there is an indirect link on surface water quality, making these findings relevant also for research on eutrophication of surface water bodies and/or on biogeochemical cycles.     

基于图像法的多孔介质双分子反应溶质运移模拟

采用图像分析法确定溶质浓度,以硫酸铜和EDTA二钠作为双分子反应物,在多孔介质模型中开展了不同粒径(1.52.0,2.53.0,3.54.0 mm)和流量(1.0,1.5,2.0 mL/s)下反应性溶质运移实验,探讨了应用不完全混合的对流弥散模型(IM-ADRE)对双分子反应溶质运移的模拟和预测,并进行了参数敏感性分析。结果表明:图像分析法可准确获取多孔介质中显色反应性溶质的浓度,灰度值与浓度的决定系数R²大于0.96;用IM-ADRE模型能够准确预测双分子反应性溶质硫酸铜和EDTA二钠在3种不同多孔介质中的运移过程,误差低于3.71%;实验条件的改变对IM-ADRE模型参数D、m和β₀的影响显著,说明模型参数依赖于环境条件,其变化规律需要根据实际环境条件进一步率定,便于IM-ADRE模型的进一步推广应用。     

Carbonaceous aerosol transport from the Indo-Gangetic Plain to the Himalayas: Carbon isotope evidence and light absorption characteristics

The Indo-Gangetic Plain (IGP) is a major regional and global emitter of atmospheric pollutants, which adversely affect surrounding areas such as the Himalayas. We present a comprehensive dataset on carbonaceous aerosol (CA) composition, radiocarbon (Δ¹⁴C) -based source apportionment, and light absorption of total suspended particle (TSP) samples collected over a 3-year period from high-altitude Jomsom in the central Himalayas. The 3-year mean TSP, organic carbon (OC), and elemental carbon (EC) concentrations were 92.0 ± 28.6, 9.74 ± 6.31, and 2.02 ± 1.35 μg m^?3, respectively, with the highest concentrations observed during the pre-monsoon season, followed by the post-monsoon, winter, and monsoon seasons. The Δ¹⁴C analysis revealed that the contribution of fossil fuel combustion (f_fossil) to EC was 47.9% ± 11.5%, which is consistent with observations in urban and remote regions in South Asia and attests that EC likely arrives in Jomsom from upwind IGP sources via long-range transport. In addition, the lowest f_fossil (38.7% ± 13.3%) was observed in winter, indicating large contributions in this season from local biomass burning. The mass absorption cross-section of EC (MAC_EC: 8.27 ± 1.76 m²/g) and water-soluble organic carbon (MAC_WSOC: 0.98 ± 0.45 m²/g) were slightly higher and lower than those reported in urban regions, respectively, indicating that CA undergo an aging process. Organic aerosol coating during transport and variation of biomass burning probably led to the seasonal variation in MAC of two components. Overall, WSOC contributed considerably to the light absorption (11.1% ± 4.23%) of EC. The findings suggest that to protect glaciers of the Himalayas from pollution-related melting, it is essential to mitigate emissions from the IGP.     

2017年湖南一次特大致洪暴雨过程的水汽特征

利用湖南省区域自动站和常规观测站降水资料、NCEP/NCAR和JRA-55再分析资料及湖南省气象台大气河预报业务产品,分析了2017年6月22日至7月2日湖南一次特大致洪暴雨过程的雨洪和水汽输送异常特征,以及大气河水汽输送对强降雨的影响,在此基础上定量分析了强降雨区各边界的水汽收支状况及各水汽轨迹的贡献。结果表明:此次强降水过程分为三个阶段,第一、第三阶段降雨的范围、强度均明显大于第二阶段。欧亚中高纬稳定的"1槽1脊"环流形势、低纬较稳定的西太副高及其外围强劲的水汽输送是此次暴雨发生的环流背景。水汽通量、水汽通量散度、比湿等物理量的水平及垂直分布对降水的阶段性特征和位置、强度变化有很好的指示作用。三个强降雨时段,来自孟加拉湾、南海和西太副高西南侧的水汽输送表现出不同的强度和位置,造成到达湖南境内的偏南水汽输送空间异常程度不同。大气河的强弱及其水汽输送通道、辐合区位置以及强降雨区各边界水汽净收入对强降水发生、发展起关键作用。水汽后向轨迹分析表明,低层偏南的水汽输送是此次极端强降雨较长时间维持的重要因素,而来自北方的干冷空气侵入利于大气斜压性增强和对流不稳定维持,是第二阶段降水强度弱于第一、第三阶段的另一原因。     

Investigating the Transport Mechanism of PM2.5 Pollution during January 2014 in Wuhan,Central China

Severe haze pollution that occurred in January 2014 in Wuhan was investigated. The factors leading to Wuhan’s PM_2.5 pollution and the characteristics and formation mechanism were found to be significantly different from other megacities, like Beijing. Both the growth rates and decline rates of PM_2.5 concentrations in Wuhan were lower than those in Beijing, but the monthly PM_2.5 value was approximately twice that in Beijing. Furthermore, the sharp increases of PM_2.5 concentrations were often accompanied by strong winds. A high-precision modeling system with an online source-tagged method was established to explore the formation mechanism of five haze episodes. The long-range transport of the polluted air masses from the North China Plain (NCP) was the main factor leading to the sharp increases of PM_2.5 concentrations in Wuhan, which contributed 53.4% of the monthly PM_2.5 concentrations and 38.5% of polluted days. Furthermore, the change in meteorological conditions such as weakened winds and stable weather conditions led to the accumulation of air pollutants in Wuhan after the long-range transport. The contribution from Wuhan and surrounding cities to the PM_2.5 concentrations was determined to be 67.4% during this period. Under the complex regional transport of pollutants from surrounding cities, the NCP, East China, and South China, the five episodes resulted in 30 haze days in Wuhan. The findings reveal important roles played by transregional and intercity transport in haze formation in Wuhan.     

Meridional Displacement of the East Asian Upper-tropospheric Westerly Jet and Its Relationship with the East Asian Summer Rainfall in CMIP5 Simulations

As the first leading mode of upper-tropospheric circulation in observations, the meridional displacement of the East Asian westerly jet (EAJ) varies closely with the East Asian rainfall in summer. In this study, the interannual variation of the EAJ meridional displacement and its relationship with the East Asian summer rainfall are evaluated, using the historical simulations of CMIP5 (phase 5 of the Coupled Model Intercomparison Project). The models can generally reproduce the meridional displacement of the EAJ, which is mainly manifested as the first principal mode in most of the simulations. For the relationship between the meridional displacement of the EAJ and East Asian rainfall, almost all the models depict a weaker correlation than observations and exhibit considerably large spread across the models. It is found that the discrepancy in the interannual relationship is closely related to the simulation of the climate mean state, including the climatological location of the westerly jet in Eurasia and rainfall bias in South Asia and the western North Pacific. In addition, a close relationship between the simulation discrepancy and intensity of EAJ variability is also found: the models with a stronger intensity of the EAJ meridional displacement tend to reproduce a closer interannual relationship, and vice versa.