裂变径迹长度测量标准化研究——锆石蚀刻标准探讨

通过不同时间蚀刻的锆石径迹长度测量,确定海南迅速冷却火山型锆石的水平封闭径迹(HCT)平均长度L＝10.93 μm,标准偏差为0.93 μm,可作为锆石长度测量的参照标准.对锆石的蚀刻标准进行了探讨,确立垂直C轴的表面径迹宽度Dpar为(1.0±0.5)μm的蚀刻标准,要求Dpar>1 μm和Dpar<1 μm的颗粒数应大致相当,以及封闭径迹宽度DHCT<1.0 μm的测量标准.     

鄂尔多斯盆地苏里格庙气田上古生界盒8段地质与地球物理响应特征

苏里格庙气田主要产气层为上古生界石盒子组盒8段，属于三角洲平原分流河道沉积。复合砂体近南北向展布；单砂体的厚度变化大，非均质性明显，储渗变化大。盒8段含气砂岩在AVO资料上有明显反映；在综合测井资料上，盒8段表现出自然伽玛测井值、密度测井值、补偿中子测井值都偏低，电阻率、声波时差测井值较高，出现了大幅度的自然电位异常。利用核磁共振测井技术测得苏里格庙区某井盒8段3555．9m～3559．6m为气层，3560．6m～3572m为气水层，与生产实践吻合得很好。     

利用VB编程完成基点网联测中的各项计算

整套重力计算程序包括了除“地改”以外的所有项目的计算，在这篇文章中我们先仅介绍了“测区参数初始化”及“基点网联测”(采用三程小循环方式)的计算方法。“测区参数初始化”功能可生成gdw．csh初始化文件(该套程序的各项功能都要读取该文件中的相关参量)；“基点网联测”功能可计算基点网联测的各项精度，对联测进行平差，求出各分基点绝对重力值。     

高速公路软基加固质量的瑞利波检测与小波分析技术

论述了用瑞利波检测高速公路软基加固的一些主要技术问题,应用新兴的小波分析技术,改善和提高检测的质量,并通过福宁高速公路的实际检测结果,说明了其思路和方法的正确性、实用性.     

The gravity field and GGOS

The gravity field of the earth is a natural element of the Global Geodetic Observing System (GGOS). Gravity field quantities are like spatial geodetic observations of potential very high accuracy, with measurements, currently at part-per-billion (ppb) accuracy, but gravity field quantities are also unique as they can be globally represented by harmonic functions (long-wavelength geopotential model primarily from satellite gravity field missions), or based on point sampling (airborne and in situ absolute and superconducting gravimetry). From a GGOS global perspective, one of the main challenges is to ensure the consistency of the global and regional geopotential and geoid models, and the temporal changes of the gravity field at large spatial scales. The International Gravity Field Service, an umbrella “level-2” IAG service (incorporating the International Gravity Bureau, International Geoid Service, International Center for Earth Tides, International Center for Global Earth models, and other future new services for, e.g., digital terrain models), would be a natural key element contributing to GGOS. Major parts of the work of the services would, however, remain complementary to the GGOS contributions, which focus on the long-wavelength components of the geopotential and its temporal variations, the consistent procedures for regional data processing in a unified vertical datum and Terrestrial Reference Frame, and the ensuring validations of long-wavelength gravity field data products.     

森林沼泽景观区中大比例尺化探找矿工作方法的研究--记大梁金矿的发现

大梁金矿是通过森林沼泽景观区开展1：50000和1：25000地球化学测量及综合地质工作而发现的,证明采用的森林沼泽景观中大比例尺化探方法是行之有效的.     

“探宝号”船可变阵列震源的实现及应用

2001年，广州海洋地质调查局对“探宝号”船原有震源更新升级为阵列可变的BOLT震源系统。随着更新改造工程的成功，该船已成为具备承担高分辨率、常规、低频深水油气地震勘探的多功能地震调查船。本文介绍了地震勘探震源的基本工作原理以及三种阵列的分布、波形、频谱等特性。     

Measurement of stream cross section using ground penetration radar with Hilbert–Huang transform

This study presents a new method to measure stream cross section without having contact with water. Compared with conventional measurement methods which apply instruments such as sounding weight, ground penetration radar (GPR), used in this study, is a non‐contact measurement method. This non‐contact measurement method can reduce the risk to hydrologists when they are conducting measurements, particularly in high flow period. However, the original signals obtained by using GPR are very complex, different from studies in the past where the measured data were mostly interpreted by experts with special skill or knowledge of GPR so that the results obtained were less objective. This study employs Hilbert–Huang transform (HHT) to process GPR signals which are difficult to interpret by hydrologists. HHT is a newly developed signal processing method that can not only process the nonlinear and non‐stationary complex signals, but also maintain the physical significance of the signal itself. Using GPR with HHT, this study establishes a non‐contact stream cross‐section measurement method with the ability to measure stream cross‐sectional areas precisely and quickly. Also, in comparison with the conventional method, no significant difference in results is found to exist between the two methods, but the new method can considerably reduce risk, measurement time, and manpower. It is proven that the non‐contact method combining GPR with HHT is applicable to quickly and accurately measure stream cross section. Copyright © 2013 John Wiley & Sons, Ltd.     

极化干涉SAR森林树高提取算法的对比分析

在对极化干涉SAR森林树高反演的DEM差值算法、相干相位-幅度综合反演算法进行分析的基础上,对基于极化干涉相干优化方法的改进算法进行了探讨。利用黑龙江大兴安岭地区的一对ALOS全极化干涉SAR数据进行实验,并对比分析各算法的反演结果。结果表明,在使用改进的算法进行森林树高反演时可以获取精度较高的反演结果,并且在一定程度上提高了森林树高反演的稳定性,为森林树高反演工作的业务化运行提供一定的依据。